Uta Klement

2023

Controllable Coating Graphene Oxide and Silanes on Cu Particles as Dual Protection for Anticorrosion

2023

Electrodeposition of FeW-graphene composites: Effect of graphene oxide concentration on microstructure, hardness and corrosion properties

2023

Effect of Part Thickness and Build Angle on the Microstructure, Surface Roughness, and Mechanical Properties of Additively Manufactured IN-939

2023

Electrodeposition of Soft Magnetic Fe-W-P Alloy Coatings from an Acidic Electrolyte

2023

Development of yttria-stabilized zirconia and graphene coatings obtained by suspension plasma spraying: Thermal stability and influence on mechanical properties

2022

All-Electrochemical Nanofabrication of Stacked Ternary Metal Sulfide/Graphene Electrodes for High-Performance Alkaline Batteries

2022

Effect of cuting parameters on the generated surface integrity of hard-turned martensitic AISI 52100 bearing steel

2022

Comparison of machining performance of stainless steel 316L produced by selective laser melting and electron beam melting

2022

Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2. 1 eutectic high-entropy alloy

2022

Influence of batch-to-batch material variations on grindability of a medium‑carbon steel

Graphene Oxide Reinforced Magnetic FeCoNiCuZn High Entropy Alloy through Electrodeposition

A descriptive phenomenological model for white layer formation in hard turning of AISI 52100 bearing steel

2021

Tribological performance assessment of Al2O3-YSZ composite coatings deposited by hybrid powder-suspension plasma spraying

2021

Effect of part thickness on the microstructure and tensile properties of 316L parts produced by laser powder bed fusion

Incorporation of graphene nano platelets in suspension plasma sprayed alumina coatings for improved tribological properties

2021

Novel suspension route to incorporate graphene nano-platelets in HVAF-sprayed Cr3C2-NiCr coatings for superior wear performance

2021

Investigating Load-dependent Wear Behavior and Degradation Mechanisms in Cr3C2-NiCr coatings deposited by HVAF and HVOF

2021

Novel utilization of liquid feedstock in high velocity air fuel (HVAF) spraying to deposit solid lubricant reinforced wear resistant coatings

Carbide-laden coatings deposited using a hand-held high-velocity air-fuel (HVAF) spray gun

2021

Microstructure evolution-based design of thermal post-treatments for EBM-built Alloy 718

2021

Increasing the Productivity of Laser Powder Bed Fusion for Stainless Steel 316L through Increased Layer Thickness

2021

In-situ TEM annealing of amorphous Fe-24at.%W coatings and the effect of crystallization on hardness

2021

Microstructure evolution and mechanical response-based shortening of thermal post-treatment for electron beam melting (EBM) produced Alloy 718

2021

The role of specific energy in micro-grinding of titanium alloy

2021

On assessing grindability of recycled and ore-based crankshaft steel: an approach combining data analysis with material science

On surface carbides in low-temperature carburized austenitic stainless steels

Effect of heat treatments on the mechanical and tribological properties of electrodeposited Fe–W/Al2O3 composites

2020

As-Built and Post-treated Microstructures of an Electron Beam Melting (EBM) Produced Nickel-Based Superalloy

Effect of process parameters on the microstructure, tensile strength and productivity of 316L parts produced by laser powder bed fusion

2020

Coolant boiling and cavitation wear – a new tool wear mechanism on WC tools in machining alloy 718 with high-pressure coolant

2020

Response of different electron beam melting produced Alloy 718 microstructures to thermal post-treatments

Electrodeposition: three steps towards sustainability

Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys

2020

Effect of the process gas and scan speed on the properties and productivity of thin 316L structures produced by Laser-Powder Bed Fusion

2020

Tool wear by dissolution during machining of alloy 718 and Waspaloy: a comparative study using diffusion couples

2020

Can Appropriate Thermal Post-Treatment Make Defect Content in as-Built Electron Beam Additively Manufactured Alloy 718 Irrelevant?

Thermal stability of white layers intended as process-induced functional coatings

Effect of scan rotation on the microstructure development and mechanical properties of 316L parts produced by laser powder bed fusion

Microstructural variations in 316L austenitic stainless steel and their influence on tool wear in machining

Characterization of abrasion- and dissolution-induced tool wear in machining

2019

Nanocrystalline Electrodeposited Fe-W/Al2O3 Composites: Effect of Alumina Sub-microparticles on the Mechanical, Tribological, and Corrosion Properties

Effect of post-treatments under hot isostatic pressure on microstructural characteristics of EBM-built Alloy 718

2019

Effects of high-pressure cooling in the flank and rake faces of WC tool on the tool wear mechanism and process conditions in turning of alloy 718

2019

Improvement in the Wear Resistance under Dry Friction of Electrodeposited Fe-W Coatings through Heat Treatments

2019

Quantification of microstructure in a eutectic high entropy alloy AlCoCrFeNi2.1

2019

A Facile Approach to Deposit Graphenaceous Composite Coatings by Suspension Plasma Spraying

2019

Investigation of micro-textured cutting tools used for face turning of alloy 718 with high-pressure cooling

Role of HIPing and Heat Treatment on Properties of Alloy 718 Fabricated by Electron Beam Melting

In-depth characterization of as-deposited and annealed Fe-Wcoatings electrodeposited from glycolate-citrate plating bath

2018

Porosity measurements in suspension plasma sprayed YSZ coatings using NMR cryoporometry and X-ray microscopy

2018

Alkoxylated β-Naphthol as an Additive for Tin Plating from Chloride and Methane Sulfonic Acid Electrolytes

A Comparative Study of Flank Wear Characteristics When Turning 20MNCRS5 Case Hardening Steel and Allay 718 Superalloy

Analysis of single splats produced by axial suspension plasma spraying

The Effect of Location and Post-treatment on the Microstructure of EBM-Built Alloy 718

2018

The Influence of Heat Treatments on the Porosity of Suspension Plasma-Sprayed Yttria-Stabilized Zirconia Coatings

Accelerated oxidation in ductile refractory high-entropy alloys

2018

Influence of Surface Features for Increased Heat Dissipation on Tool Wear

2018

Study of flank wear topography and surface-deformation of cemented carbide tools after turning Alloy 718

Effect of build geometry on the microstructural development of 316L parts produced by additive manufacturing

2018

Microstructure and Porosity of Laser Welds in Cast Ti-6Al-4V with Addition of Boron

Truing of diamond wheels - Geometry, kinematics and removal mechanisms

Microstructural characteristics of Alloy 718 and Waspaloy and their influence on flank wear during turning

Enhanced mechanical properties and microstructural modifications in electrodeposited Fe-W alloys through controlled heat treatments

Porosity measurements on heat treated suspension plasma sprayed YSZ coatings using NMR cryoporometry

Thermal stability of nanocrystalline Ni- and Co-based pulsed current electrodeposits: correlation of calorimetric measurements and microstructure development upon annealing

Characterization of tool wear when machining Alloy 718 with high-pressure cooling using conventional and surface-modified WC–Co tools

Flank wear characteristics of WC-Co tools when turning Alloy 718 with high-pressure coolant supply

2017

3D Analysis of Porosity in a Ceramic Coating Using X-ray Microscopy

Electron backscatter diffraction-analysis of deformed micro-milled commercially pure-titanium specimens at different strain values

Porosity investigation of yttria-stabilized zirconia topcoats using NMR cryoporometry

Atomic-scale investigation of carbon atom migration in surface induced white layers in high-carbon medium chromium (AISI 52100) bearing steel

EBSD Analysis and Assessment of Porosity in Thermal Barrier Coatings Produced by Axial Suspension Plasma Spraying (ASPS)

2017

Tailoring magnetic properties of multicomponent layered structure via current annealing in FePd thin films

Mid-term meeting of SELECTA: a European Training Network on smart electrodeposited alloys for environmentally sustainable applications

Porosity measurements in suspension plasma sprayed YSZ coatings

Microstructure of plasma sprayed Al2O3-3wt%TiO2 coating using freeze granulated powder

TIG welding and laser welding of boron alloyed Ti-6Al-4V

Characterization of tool wear when machining Alloy 718 with high pressure cooling using conventional and surface-modified WC-Co tools

2016

Alloy design for intrinsically ductile refractory high-entropy alloys

Fatigue strength dependence on microstructure and defects in Ti-6Al-4V welds

2015

Development of advanced hybrid materials with the help of pulse electrodeposition

2015

Characterization of multiple twinned structural units in pulse-electrodeposited nickel

2015

Predicting the solid solubility limit in high-entropy alloys using the molecular orbital approach

Formation mechanisms of white layers induced by hard turning of AISI 52100 steel

Mechanical properties of bulk- and hybrid nanocrystalline materials

A Methodology for Temperature Correction When Using Two-Color Pyrometers - Compensation for Surface Topography and Material

Cutting temperatures during hard turning—Measurements and effects on white layer formation in AISI 52100

2014

Dissolution of iron-chromium carbides during white layer formation induced by hard turning of AISI 52100 steel

Formation of Multiple Twinned Structural Units in Electrodeposited Nickel after Annealing

Failure Investigation of an Airline Engine Failure During Take Off

2013

Effect of Heat Treatment on Chip Formation in a Case Hardening Steel

Practical Metallography 12/2013

The influence of microstructure and mechanical properties on the machinability of martensitic and bainitic prehardened mould steels

2013

The effect of crystallographic orientation on solid metal induced embrittlement of Ti-6Al-1Mo-1V in contact with copper

Characterization of cold lap defects in tandem arc MAG welding

Characterization of Surface Defects on Pulse-Electrodeposited Nickel Tubes

Machinability evaluation of pre-hardened plastic mould steels

Texture of Electrodeposited Nanocrystalline Ni-Fe with banded structure

Microstructure characterization of white layer formed by hard turning and wire electric discharge machining in high carbon steel (AISI 52100)

Characterization of the Surface Integrity induced by Hard Turning of Bainitic and Martensitic AISI 52100 Steel

Electrodeposited nanocrystalline Ni-Fe with banded structure

Effect of Processing on Microstructure and Physical Properties of Three Nickel-Based Superalloys with Different Hardening Mechanisms

Influence of additives on texture development of submicro- and nanocrystalline Nickel

Characterization of cold lap defects in tandem arc welding

A simple way of improving graphite nanoplatelets (GNP) for their incorporation into a polymer matrix

Dielectric Properties of SiC nanowires With Different Chemical Compositions

TEM study of carbide precipitation in low alloyed austempered ductile iron

An Experimental Study to Understand the Effect of Cooling Media in Metal Cutting

Microstructure and properties of Al2O3-3wt% TiO2 plasma sprayed coating affected by powder manufacturing methods

Comparison of the microstructures in continuous-cooled and quench-tempered pre-hardened mould steels

Comparison of microstructure in Ni-Al single splats and millimeter sized drops

Study of microstructural influences on machinability of case hardening steel

Microstructure in work-hardened micro-truss materials given post-forming annealing treatments

Microwave absorbing properties of structural nanocomposites with surface treated Co ferrite nanoparticles as filler

Characterization of Cold Lap Defects in Tandem Arc MAG Welding

Effect of Annealing on Microstructural Development and Grain Orientation in Electrodeposited Ni

Thermal stability in nanocrystalline electrodeposits - a comparison of Ni- and Co-based materials

A comparative study of mechanical properties between HVOF-sprayed Maxphase materials

Characterization of Adhesion Strength of HVOF Sprayed IN718 Coatings

Effect of heat treatment on low conductive thermal barrier coatings

Study of machinability of case hardening steel in production environment

Characterization of single splats produced by plasma spraying

Characterization and dielectric properties of beta-SiC nanofibres

On the orientations of abnormally grown grains in nanocrystalline Ni and Ni–Fe

Stärka den kvinnliga forskarens roll inom nanoforskningen

Effects on machining due to microstructure variations in a case hardening steel

Ranking of materials by their machinability applying a short term test

Machinability evaluation of prehardened plastic moulding steels

Enhanced thermal stability of a cobalt-boron carbide nanocomposite by ion-implantation

Microwave absorbing properties of ferrite-based nanocomposites

Individual grain orientations and texture development of nanocrystalline electrodeposits showing abnormal grain growth

The role of alpha- to epsilon-Co phase transformation on strain hardening of a Co-Cr-Mo laser clad

Electrodeposited nanocrystalline Co-P alloys: Microstructural characterization and thermal stability

Thermal stability of electrodeposited nanocrystalline Ni- and Co-based materials

Preparation and characterization of the ITO surface and the Al/Alq3/ITO heterostructure for OLEDs

An Experimental Study to Understand the Effect of Cooling Media at Metal Cutting

Analytical TEM study of annealed nanocrystalline cobalt–phosphorous electrodeposits

EBSD and EDX analysis at the cladding-substrate interface of a laser clad railway wheel

Effect of Sigma2 grain boundaries on plastic deformation of WC-Co cemented carbides

Microstructural characterization of a Co-Cr-Mo laser clad applied on railway wheels

Microstructural characterisation of a Co-Cr-Mo laser clad applied on railway wheels

Texture development of nanocrystalline Ni and Ni-Fe electrodeposits showing abnormal grain growth

Effect of sigma-2 grain boundaries on plastic deformation of WC-Co cemented carbides

Thermal stability of electrodeposited nanocrystalline Co-1.1at%P

X-ray photoelectron spectroscopy studies of indium tin oxide nanocrystalline powder

A comparison of thermal stability in nanocrystalline Ni- and Co-based materials

A comparison of thermal stability in nanocrystalline Ni- and Co-based materials

Microstructural development of electrodeposited nanocrystalline Ni- and Co-based materials upon annealing

Orientation determination on non planar surfaces

EBSD characterization of carbide-carbide boundaries in WC-Co

Microstructual investigation of Co-Cr clad applied on railway wheels

Characterization of precipitates in Inconel 718

Preparation of Mn, Fe and Co based perovskite catalysts using microemulsions

Thermal stability of nanostructured electrodeposits

Diffusion of oxygen in CdSe-photosensor arrays

TEM and FIM/TAP investigations of nanocrystalline CoP

Microstructural development of nanocrystalline NiFe upon annealing

Grain growth and segregation behaviour of electroplated CoP–alloys

Effect of grain boundary geometry on plastic deformation in WC-Co