Prediction, Formation and Analysis of Microstructure of High Chromium-Alloyed PM Stainless Steel Sintered in Different Atmospheres
Artikel i vetenskaplig tidskrift, 2014

Analysis of the microstructure of high chromium alloyed PM stainless steel was performed in several stages. The equilibrium phase diagrams and mass fractions of phases for alloy Fe-20%Cr-17%(Ni,Si,Mn)-C were calculated using Thermo-Calc and JMatPro software. All calculations were done for two nitrogen content levels, which correspond to compositions of material sintered in N2-H2 and atmosphere without nitrogen (pure H2 and argon), respectively. According to calculations, austenite and chromium carbides are in equilibrium if sintering is an in atmosphere without nitrogen, and austenite with chromium carbonitrides and carbides for material sintered in N2-H2 atmosphere. The microstructure of the materials is affected by the sintering atmosphere, especially at the surface. The influence of sintering atmospheres on microstructure was analyzed. The results showed that the predicted microstructure is in good agreement with observed real microstructure.

microstructure

nitrogen

high chromium alloyed steel

sintering atmosphere

Författare

Ruslan Shvab

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Eduard Hryha

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Petro Shykula

Ola Bergman

Sven Bengtsson

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Eva Dudrova

Powder Metallurgy Progress

1335-4533 (eISSN)

Vol. 14 2 99-107

Ämneskategorier

Annan materialteknik

Metallurgi och metalliska material

Mer information

Skapat

2017-10-07