Effect of Cerium on the Electrical Properties of a Cobalt Conversion Coating for Solid Oxide Fuel Cell Interconnects - A Study Using Impedance Spectroscopy
Artikel i vetenskaplig tidskrift, 2015

Coatings of metallic cobalt, which convert into a cobalt manganese spinel oxide are known to improve the properties of interconnects for solid oxide fuel cells (SOFCs). The addition of cerium to the cobalt coating further improves the corrosion properties of the material. For this study traditional four-point DC measurements at high temperatures were combined with impedance spectroscopy at low temperatures in order to investigate the effect of cerium on the electrical properties of a cobalt conversion coating. It was found that combination-coatings of cerium and cobalt exhibit superior electrical properties compared to pure cobalt coatings. Cerium slows down the growth of chromia and prevents the outward diffusion of iron into the cobalt spinel layer. Both effects are beneficial for the electrical properties of the interconnect. Impedance spectroscopy measurements revealed that even after more than 3000 h of exposure the outer cobalt manganese spinel layer still has a higher electrical conductivity when cerium was present.

Författare

Jan Gustav Grolig

Kemi och kemiteknik, Energi och material, Oorganisk miljökemi

Jan Froitzheim

Kemi och kemiteknik, Energi och material, Oorganisk miljökemi

Jan-Erik Svensson

Kemi och kemiteknik, Energi och material, Oorganisk miljökemi

Electrochimica Acta

0013-4686 (ISSN)

Vol. 184 301-307

Ämneskategorier

Oorganisk kemi

DOI

10.1016/j.electacta.2015.10.111