Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2. 1 eutectic high-entropy alloy
Artikel i vetenskaplig tidskrift, 2022

Changes in the microstructure and mechanical properties during annealing at 800 °C have been characterized in a 90% cold-rolled AlCoCrFeNi2.1 eutectic high-entropy alloy containing the FCC and B2 (ordered BCC) phases. In the as-rolled condition, the FCC phase is found to contain a high frequency of finely spaced deformation-induced boundaries, which provides a high driving force for recrystallization within this phase. Quantitative analysis of electron backscatter diffraction data from the annealed samples indicates that recrystallization progresses faster in the FCC phase than in B2 regions. Although recrystallization leads to substantial coarsening of the microstructure, the average recrystallized grain size remains in the submicron range even after 2 h at 800 °C. Tensile test data demonstrate that combinations of high yield strength and good ductility are obtained in partially recrystallized samples produced by annealing for 2.5–10 min. However, the work-hardening capacity of each annealed sample is lower than that of the cold-rolled sample. Furthermore, for the samples annealed for at least 5 min a yield drop is observed soon after the onset of plastic deformation. Analysis of the microstructure and mechanical behavior in several annealed AlCoCrFeNi2.1 samples indicates a clear correlation between the magnitude of the yield drop and the recrystallized fraction. The mechanical behavior of the AlCoCrFeNi2.1 alloy studied in this work is compared with that reported in previous publications.

Microstructure

Recrystallization

High-entropy alloys

Mechanical properties

Texture

Författare

Adrianna Lozinko

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Reza Gholizadeh

Kyoto University

Yubin Zhang

Danmarks Tekniske Universitet (DTU)

Uta Klement

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Nobuhiro Tsuji

Kyoto University

Oleg V. Mishin

Danmarks Tekniske Universitet (DTU)

Sheng Guo

Chalmers, Industri- och materialvetenskap, Material och tillverkning

Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

0921-5093 (ISSN)

Vol. 833 142558

Eutektiska högentropilegeringar : en lovande ny klass av högtemperaturlegeringar

Vetenskapsrådet (VR) (2015-04087), 2016-01-01 -- 2020-12-31.

Ämneskategorier

Teknisk mekanik

Annan materialteknik

Metallurgi och metalliska material

Infrastruktur

Chalmers materialanalyslaboratorium

Styrkeområden

Materialvetenskap

DOI

10.1016/j.msea.2021.142558

Mer information

Senast uppdaterat

2022-01-10