Influence of Selective Laser Heat Treatment Pattern Position on Geometrical Variation
Paper i proceeding, 2018

Selective laser heat treatment allows local modification of material properties and can have wide range of applications within the automotive industry. Enhanced formability and strength are possible to achieve. As the process involves selective heating, positioning of the heat treatment pattern in local areas is vital. Pattern positioning is often suggested based on the part design and forming aspects of the material to avoid failures during manufacturing. Along with improving material properties in desired local areas, the process also produces unwanted distortion in the material. Such effects on variation should be considered and minimized. In this paper, heat treatment pattern is offset from its original position and its effect on geometrical variation is investigated. Boron steel blanks are selectively laser heat treated with a specific heat treatment pattern and then stamped to desired shape. Two heat treatment pattern dimensions are examined. Variation at blank level and after stamping, and springback after stamping is observed. Results show that pattern offsetting leads to higher geometrical variation. Therefore, correct positioning of heat treatment pattern is important to minimize its effect on geometrical variation along with enhancing the material properties. Knowledge from this study will contribute to various stages of the geometrical assurance process.

geometrical variation

Selective laser heat treatment

heat treatment pattern

boron steels

Författare

Vaishak Ramesh Sagar

Chalmers, Industri- och materialvetenskap, Produktutveckling

Kristina Wärmefjord

Chalmers, Industri- och materialvetenskap

Rikard Söderberg

Chalmers, Industri- och materialvetenskap

Proceedings of the ASME 2018 International Mechanical Engineering Congress & Exposition

Vol. 2

ASME's International Mechanical Engineering Congress and Exposition
Pittsburgh, USA,

Ämneskategorier

Produktionsteknik, arbetsvetenskap och ergonomi

Bearbetnings-, yt- och fogningsteknik

Styrkeområden

Produktion

DOI

10.1115/IMECE2018-86164

Mer information

Senast uppdaterat

2024-07-17