Steel converter slag as an oxygen carrier for chemical-looping gasification
Artikel i vetenskaplig tidskrift, 2020

Chemical Looping Gasification (CLG) is a dual fluidized bed gasification technique where an oxygen carrier is used as bed material instead of sand. An optimized process could have several advantages, including i) one concentrated CO2 stream, amiable for carbon capture, ii) less tar formation, iii) additional reaction pathways for syngas production, iv) less corrosion and v) CO2 is generated in one stream from the fuel reactor that could be captured. Steel converter slag, also called LD slag, is a by-product from the steel industry which, besides iron, contains significant fractions of Ca, Mg, Al and Mn in a complex matrix of phases. The low cost and presence of known catalytic solid phases in the slag makes it interesting as an oxygen carrier in CLG. In this work, LD slag was investigated using a batch reactor with gaseous and solid fuel as well as with TGA. It was found that during gasification with LD slag, the material can i) transfer oxygen to the fuel, ii) catalyze the water-gas-shift reaction, iii) react with CO2 forming carbonates and iv) split water to hydrogen. The overall result was a raw gas with a higher H2/CO ratio for LD slag than the other tested materials.

Water-splitting

Chemical looping gasification

Steel converter slag

Biomass

Oxygen carrier

LD slag

Författare

Fredrik Hildor

Chalmers, Kemi och kemiteknik, Energi och material

Henrik Leion

Chalmers, Kemi och kemiteknik, Energi och material

Carl Johan Linderholm

Chalmers, Rymd-, geo- och miljövetenskap, Energiteknik

Tobias Mattisson

Chalmers, Rymd-, geo- och miljövetenskap, Energiteknik

Fuel Processing Technology

0378-3820 (ISSN)

Vol. 210 106576

Kemcyklisk förgasning av biomassa för framställning av biodrivmedel

Energimyndigheten (43220-1), 2017-01-01 -- 2019-12-31.

Reaktionsvägar av tjäror med reversibla metalloxider av varierande oxidationsgrad

Vetenskapsrådet (VR) (2015-04371), 2016-01-01 -- 2019-12-31.

Ämneskategorier

Kemiska processer

Bioenergi

Metallurgi och metalliska material

DOI

10.1016/j.fuproc.2020.106576

Mer information

Senast uppdaterat

2020-10-16