Carbon Allocation in Multi-Product Steel Mills That Co‐process Biogenic and Fossil Feedstocks and Adopt Carbon Capture Utilization and Storage Technologies
Artikel i vetenskaplig tidskrift, 2020

This work investigates the effects of carbon allocation on the emission intensities of low-carbon products cogenerated in facilities that co‐process biogenic and fossil feedstocks and apply the carbon capture utilization and storage technology. Thus, these plants simultaneously sequester CO2 and synthesize fuels or chemicals. We consider an integrated steel mill that injects biomass into the blast furnace, captures CO2 for storage, and ferments CO into ethanol from the blast furnace gas. We examine two schemes to allocate the CO2 emissions avoided [due to the renewable feedstock share (biomass) and CO2 capture and storage (CCS)] to the products of steel, ethanol, and electricity (generated through the combustion of steel mill waste gases): 1) allocation by (carbon) mass, which represents actual carbon flows, and 2) a free-choice attribution that maximizes the renewable content allocated to electricity and ethanol. With respect to the chosen assumptions on process performance and heat integration, we find that allocation by mass favors steel and is unlikely to yield an ethanol product that fulfills the Renewable Energy Directive (RED) biofuel criterion (65% emission reduction relative to a fossil comparator), even when using renewable electricity and applying CCS to the blast furnace gas prior to CO conversion into ethanol and electricity. In contrast, attribution fulfills the criterion and yields bioethanol for electricity grid intensities 2/kWhel without CCS and yields bioethanol for grid intensities up to 800 gCO2/kWhel with CCS. The overall emissions savings are up to 27 and 47% in the near-term and long-term future, respectively. The choice of the allocation scheme greatly affects the emissions intensities of cogenerated products. Thus, the set of valid allocation schemes determines the extent of flexibility that manufacturers have in producing low-carbon products, which is relevant for industries whose product target sectors that value emissions differently. We recommend that policymakers consider the emerging relevance of co‐processing in nonrefining facilities. Provided there is no double-accounting of emissions, policies should contain a reasonable degree of freedom in the allocation of emissions savings to low-carbon products, so as to promote the sale of these savings, thereby making investments in mitigation technologies more attractive to stakeholders.

carbon capture utilization and storage

pulverized coal injection

co-processing

biofuels

syngas fermentation

low-carbon products

allocation

integrated steel mill

Författare

Max Biermann

Chalmers, Rymd-, geo- och miljövetenskap, Energiteknik

Rubén Mocholí Montañés

Chalmers, Rymd-, geo- och miljövetenskap, Energiteknik

Fredrik Normann

Chalmers, Rymd-, geo- och miljövetenskap, Energiteknik

Filip Johnsson

Chalmers, Rymd-, geo- och miljövetenskap, Energiteknik

Frontiers in Chemical Engineering

26732718 (eISSN)

Vol. 2 596279

TORrefying wood with Ethanol as a Renewable Output: large-scale demonstration (TORERO)

Europeiska kommissionen (EU) (EC/H2020/745810), 2017-05-01 -- 2020-04-30.

Drivkrafter

Hållbar utveckling

Styrkeområden

Energi

Ämneskategorier

Kemiska processer

Bioenergi

Energisystem

DOI

10.3389/fceng.2020.596279

Relaterade dataset

Supplementary Material to Carbon Allocation in Multi-Product Steel Mills That Co‐process Biogenic and Fossil Feedstocks and Adopt Carbon Capture Utilization and Storage Technologies [dataset]

URI: https://www.frontiersin.org/articles/10.3389/fceng.2020.596279/full#supplementary-material

Mer information

Senast uppdaterat

2023-11-23