Loss Reduction by Synchronous Rectification in a 50 kW SiC-based Inductive Power Transfer System
Paper i proceeding, 2020

With development in wide band-gap semiconductors, such as silicon carbide (SiC), inductive power transfer (IPT) has become a promising technology for charging electric vehicles (EV). To meet fast charging demands by consumers, higher power levels in IPT is required. The power in IPT is usually limited by thermal stress due to losses at the vehicle side. Synchronous rectification is an efficient way to reduce losses compared to passive rectification. In this paper, the loss reduction accounted to synchronous rectification is quantitatively evaluated. The level of reductions varies depending on the load level, primary voltage, and constant current or constant voltage (CCCV) operation. The analytical results support the simulation results for various operating points. The loss profiles are studied for different dc-link voltages and duty cycles. An 800 V, 50 kW dual-active bridge test setup with series-series compensation is constructed and experiments are done for verification. The setup is arranged in a back-to-back configuration with a common dc-link. Experimental result shows that losses are reduced by up to 60 % on the receiving side with synchronous rectification. At rated operation the losses are reduced by 100 W in the secondary side inverter.

wireless charging

inductive power transfer

dc-dc converter

phase-shift control

reactive power compensation

dc-link voltage control

bidirectional

silicon carbide

Författare

Daniel Pehrman

Chalmers, Elektroteknik, Elkraftteknik

Yujing Liu

Chalmers, Elektroteknik, Elkraftteknik

Chao Cui

Harbin Institute of Technology

Xiaoliang Huang

Chalmers, Elektroteknik, Elkraftteknik

IECON Proceedings (Industrial Electronics Conference)

Vol. 2020-October 3907-3912 9254316

46th Annual Conference of the IEEE Industrial Electronics Society, IECON 2020
Online, Singapore,

Ämneskategorier

Övrig annan teknik

Farkostteknik

Annan elektroteknik och elektronik

DOI

10.1109/IECON43393.2020.9254316

Mer information

Senast uppdaterat

2021-06-03