Cyclic Deformation of Microcantilevers Using In-Situ Micromanipulation
Artikel i vetenskaplig tidskrift, 2021

Background: The trend in miniaturisation of structural components and continuous development of more advanced crystal plasticity models point towards the need for understanding cyclic properties of engineering materials at the microscale. Though the technology of focused ion beam milling enables the preparation of micron-sized samples for mechanical testing using nanoindenters, much of the focus has been on monotonic testing since the limited 1D motion of nanoindenters imposes restrictions on both sample preparation and cyclic testing.

Objective/Methods: In this work, we present an approach for cyclic microcantilever bending using a micromanipulator setup having three degrees of freedom, thereby offering more flexibility.

Results: The method has been demonstrated and validated by cyclic bending of Alloy 718plus microcantilevers prepared on a bulk specimen. The experiments reveal that this method is reliable and produces results that are comparable to a nanoindenter setup.

Conclusions: Due to the flexibility of the method, it offers straightforward testing of cantilevers manufactured at arbitrary position on bulk samples with fully reversed plastic deformation. Specific microstructural features, e.g., selected orientations, grain boundaries, phase boundaries etc., can therefore be easily targeted.

Micromechanics

Cyclic bending

Electron microscopy

Micromanipulators

Bauschinger effect

Författare

Anand Harihara Subramonia Iyer

Chalmers, Fysik, Mikrostrukturfysik

Magnus Hörnqvist Colliander

Chalmers, Fysik, Mikrostrukturfysik

Experimental Mechanics

0014-4851 (ISSN)

Vol. In Press

Ämneskategorier

Materialteknik

DOI

10.1007/s11340-021-00752-3

Mer information

Senast uppdaterat

2021-07-29