Powder bed fusion electron beam of an oxygen-compatible β-Ti–35.5Nb–2Ta–3Zr alloy: Feasibility and material evaluation
Artikel i vetenskaplig tidskrift, 2025
Additive manufacturing (AM) by powder bed fusion electron beam (PBF-EB) is a state-of-the-art method for processing titanium-based alloys, especially due to the high inherent oxygen affinity of the material. Ti–Nb–Ta–Zr alloys provide, dependent on composition and manufacturing, a versatile property profile and are of increasing interest as structural materials as AM eases their production. Enhancing sustainability through reduced purity requirements, alongside improved material performance, could lead to more efficient and environmentally-friendly material design. This study explores the feasibility of producing dense β-Ti–35.5Nb–2Ta–3Zr alloys with an elevated oxygen content of 2800 ppm through PBF-EB, achieving up to 99.7% density and notable mechanical properties such as a hardness of 330HV0.3. The microstructure was found to be single-β in all samples with low segregation of constitutional elements. Indications of a fibre texture switch, depending on the chosen process parameters, were found.
microstructure
TNTZ
β-titanium
additive manufacturing
Författare
Silja Katharina Rittinghaus
Bergische Universität Wuppertal
Chalmers, Industri- och materialvetenskap, Material och tillverkning
Bala Malladi
Chalmers, Industri- och materialvetenskap, Material och tillverkning
Marcus Willi Rackel
Helmholtz
Daniel Borchert
Bergische Universität Wuppertal
Hamed Shokri
Bergische Universität Wuppertal
Karin Ratschbacher
GfE Metalle und Materialien GmbH
Michael Budnitzki
Forschungszentrum Jülich
Bilal Gökce
Bergische Universität Wuppertal
Eduard Hryha
Chalmers, Industri- och materialvetenskap, Material och tillverkning
European Journal of Materials
26889277 (eISSN)
Vol. 5 1 2448120Ämneskategorier (SSIF 2025)
Bearbetnings-, yt- och fogningsteknik
DOI
10.1080/26889277.2024.2448120