Development and Characterization of Microcoolers using Carbon Nanotubes
Paper i proceeding, 2006

The continuously increasing integration and packaging density of microelectronic systems requires high-performance cooling technologies, among which the microchannel cooler is considered as a good approach. This work aims to develop a microchannel cooler with vertically aligned carbon nanotubes as the fins. Carbon nanotubes have unusually high thermal conductivity along with the possibility of small-scale formatting and wafer-level integration with chips, thus they provide a promising solution to implement microchannel coolers. By using photolithography, chemical vapor deposition, and adhesive bonding techniques, microcoolers containing carbon nanotube fins of different sizes and spacings are fabricated and then tested. They are also compared to a cooler with common silicon fins, as well as one with no fins. The experimental results reveal good heat removal capability of microcoolers using carbon nanotubes. The measurement result of the CNT cooler is about 10-15% better than the silicon cooler.

Författare

Teng Wang

Chalmers, Mikroteknologi och nanovetenskap

Martin Jönsson

Göteborgs universitet

Zhimin Mo

Chalmers

Eleanor E.B. Campbell

Chalmers

Johan Liu

Chalmers, Mikroteknologi och nanovetenskap

Elisabeth Nyström

Chalmers, Mikroteknologi och nanovetenskap

Proceedings of the 1st IEEE CPMT Electronics Systemintegration Technology Conference (ESTC2006)

Vol. 2 881-885
1424405521 (ISBN)

Ämneskategorier

Elektroteknik och elektronik

DOI

10.1109/ESTC.2006.280115

ISBN

1424405521

Mer information

Senast uppdaterat

2024-07-12