Determination of the glass transition of powder samples using Dynamic Mechanic Analysis on compacts
Artikel i övrig tidskrift, 2010

Dynamic Mechanic Analysis, DMA, is a sensitive method to determine the glass transition temperature (Tg) of materials. Several different sample geometries such as three point bending, stretched films or compressed cylinders, are commonly used. The Tg of a powder is related to its “sticky point”, i.e. the temperature when the powder particles interact instead of flowing freely. The determination of powder Tg is not straightforward using DMA due to the limiting geometry. Here it is demonstrated that the Tg of powder samples can be effectively and correctly determined by DMA on compacts in compression mode, using a standard wedge shaped probe usually utilized in three point bend analysis. The analysis of compacts holds the benefits of analysing powder samples as received from manufacturers, being relatively robust with regard to deformation as the material becomes rubbery, and enabling easy sample preparation and handling.

Författare

Mikael Larsson

Chalmers, Kemi- och bioteknik, Farmaceutisk teknologi

SuMo Biomaterials

Anette Larsson

SuMo Biomaterials

Chalmers, Kemi- och bioteknik, Farmaceutisk teknologi

Mats Stading

Chalmers, Material- och tillverkningsteknik, Polymera material och kompositer

Annual Transactions - The Nordic Rheology Society

1601-4057 (ISSN)

Vol. 18 59-64

Ämneskategorier

Materialteknik

Farmaceutisk vetenskap

Kemi

Styrkeområden

Materialvetenskap

Mer information

Senast uppdaterat

2020-08-18