A FE based machining simulation methodology accounting for cast iron microstructure
Artikel i vetenskaplig tidskrift, 2014

In the present paper the effect of graphite nodularity in the microstructure of cast iron is assessed with respect to its machinability at orthogonal cutting. A micro-structure based model of the cast iron material has been developed based on analyses of micro-graph images. The image analysis combines pearlitic grains with graphite nodules to produce the micro-structures. Continuous deformation behavior of pearlite and graphite phases is described using the Johnson-Cook (JC) viscoplasticty model including temperature dependence. Of particular concern is the modeling of the chip formation, induced by the micro-structure morphology and the mechanical behavior of the work piece material in the vicinity of the insert. This is described by the element deletion methodology along with the Johnson-Cook failure criterion to realize the fracture kinematics. A parametric study is carried out by varying the nodularity of the graphite. To validate the model, the finite element results are compared to machining test results carried out on a Compacted Graphite Iron (CGl) material in a related paper It turns out that the FE-simulated and experimentally observed cutting force and chip formation compare fairly well.

Cast iron

Fracture modeling

Chip formation



Johnson-Cook model

Machining simulation



Goran Ljustina

Chalmers, Tillämpad mekanik, Material- och beräkningsmekanik

Ragnar Larsson

Chalmers, Tillämpad mekanik, Material- och beräkningsmekanik

Martin Fagerström

Chalmers, Tillämpad mekanik, Material- och beräkningsmekanik

Finite Elements in Analysis and Design

0168-874X (ISSN)

Vol. 80 1-10


Hållbar utveckling


Teknisk mekanik





Grundläggande vetenskaper



Mer information

Senast uppdaterat