Combustion of seaweed - A fuel design strategy
Artikel i vetenskaplig tidskrift, 2017

The high ash content and varying ash composition in algal biomass is often mentioned as problematic if to be used for thermal energy conversion. This paper suggests an approach where detailed information on ash composition and predicted ash formation reactions are basis for successful remedies enabling the use of fuels considered to be difficult. The procedure is demonstrated on seaweed (Saccharina latissima) cultivated for biorefinery purposes. The ash composition of the seaweed was found suitable for co-combustion with Miscanthus x giganteus, an energy crop high in alkali and silicon. Fuel mixtures were combusted in a bubbling fluidized bed reactor and ash samples were analyzed by SEM-EDS and XRD. The results showed that Ca from the seaweed was very reactive and thus efficient in solving the silicate melting problems. The fuel design approach was proven successful and the potential for using otherwise difficult seaweed fuels in synergetic co-combustion was demonstrated. (C) 2017 Elsevier B.V. All rights reserved.

Saccharina-Latissima

Wood

Dolomite

Fluid-Bed Gasification

Additives

Biomass

Calcite

Ash

Macroalgae

Kaolin

Författare

N. Skoglund

Luleå tekniska universitet

Umeå universitet

K. Werner

Umeå universitet

Göran M. Nylund

Göteborgs universitet

Henrik Pavia

Göteborgs universitet

Eva Albers

Chalmers, Biologi och bioteknik, Industriell bioteknik

M. Brostrom

Umeå universitet

Fuel Processing Technology

0378-3820 (ISSN)

Vol. 165 155-161

Makroalger för ett biobaserat samhälle - odling, bioraffinering och energiutvinning (SEAFARM)

Formas (213-2013-92), 2013-01-01 -- 2017-12-31.

Ämneskategorier

Bioprocessteknik

DOI

10.1016/j.fuproc.2017.04.017

Mer information

Senast uppdaterat

2018-08-10