Delamination detection in composite laminates using low frequency guided waves: Numerical simulations
Artikel i vetenskaplig tidskrift, 2018

The aim of this study is to find an efficient way of finite element modelling of guided wave propagation in composite laminates to detect delaminations. A novel approach is proposed to model delaminations by locally reducing the stiffness and it is implemented in a finite element shell model. The approach is verified by comparing the results with the results of two existing approaches. Results show that the stiffness reduction approach gives reasonable accuracy for the primary wave modes and improvement in simulation time. Moreover, it is shown that new convergence criteria should be considered to simulate the guided wave propagation. Additionally, the Pearson correlation coefficient is introduced as a good criterion for delamination detection in such problems. All the conclusions are made when simulations are performed in the low frequency range and can be used to study guided wave propagation in large composite structures such as wind turbine blades.

Delamination detection

NDT

Guided wave propagation

Low frequency

Composite laminates

Författare

Siavash Shoja

Chalmers, Mekanik och maritima vetenskaper, Dynamik

Viktor Berbyuk

Chalmers, Mekanik och maritima vetenskaper, Dynamik

Anders E Boström

Chalmers, Mekanik och maritima vetenskaper, Dynamik

Composite Structures

0263-8223 (ISSN)

Vol. 203 826-834

Ämneskategorier

Teknisk mekanik

Beräkningsmatematik

Strömningsmekanik och akustik

DOI

10.1016/j.compstruct.2018.07.025

Mer information

Senast uppdaterat

2018-08-31