Sead Canovic

Comparing depth profiling of oxide scale on SOFC interconnect-materials using ToF-SIMS with Ga-69(+), Bi-3(+)/Cs+ and C-60(+)/C-60(2+) as primary and sputter ions

2015

The Oxide Scales Formed on a Dispersion-Strengthened Powder Metallurgical FeCrAl Alloy at 900 A degrees C in O-2 and in O-2 + H2O

2015

Oxidation of a Dispersion-Strengthened Powder Metallurgical FeCrAl Alloy in the Presence of O2 at 1,100°C: The Influence of Water Vapour

Oxidation of Co- and Ce-nanocoated FeCr steels: A microstructural investigation

Oxidation behavior of a Mo(Si,Al)2 composite at 900–1600 C in dry air

Oxidation Behaviour of Sanicro 25 (42Fe22Cr25NiWCuNbN) in O-2/H2O Mixture at 600 degrees C

Long term study of Cr evaporation and high temperature corrosion behaviour of Co coated ferritic steel for solid oxide fuel cell interconnects

CVD TiC/alumina multilayer coatings grown on sapphire single crystals

Microstructural Investigation of the Initial Oxidation of the FeCrAlRE Alloy Kanthal AF in Dry and Wet O-2 at 600 and 800 degrees C

Alumina scale formation on a powder metallurgical FeCrAl alloy (Kanthal APMT) at 900-1100°C in dry O2 and in O2 + H2O

CVD TiC/alumina and TiN/alumina multilayer coatings grown on sapphire single crystals

Microstructure of Alumina (Al2O3) Grown by Oxidation of FeCrAl Alloys and by Chemical Vapour Deposition

Oxidation of FeCrAl foils at 500-900 degrees C in dry O-2 and O-2 with 40% H2O

TEM Investigation of Alpha Alumina Films Deposited at Low Temperature

Grain contrast imaging in FIB and SEM

Cyclic oxidation of two FeCrAlRE foils at 1100 oC - The influence of the concentration of minor alloying elements on scale microstructure

Thin foil analysis in the SEM

Microstructural investigation of CVD and PVD alumina coatings

Transmission electron microscopy and X-ray diffraction analysis of alumina coating by alternate-current inverted magnetron-sputtering technique

TEM and DFT investigation of CVD TiN/κ–Al2O3 multilayer coatings

Influence of H2O(g) on the Oxide Microstructure of the Stainless Steel 353MA at 900°C in Oxygen.

Microstructural Investigation of Protective and Non-Protective Oxides on 11% Chromium Steel

Microstructural investigation of chips formed during metal cutting

High resolution chemical analysis in SEM

Microstructural investigation of the effect of water vapour on the oxidation of alloy 353 MA in oxygen at 700 and 900ºC