Mats Ander

Senior Lecturer at Material and Computational Mechanics

Source: chalmers.se
Image of Mats Ander

Showing 40 publications

2024

The architectural application of shells whose boundaries subtend a constant solid angle

Emil Adiels, Mats Ander, Christopher John Kenneth Williams
Computer Aided Geometric Design. Vol. 111
Journal article
2024

The structural behaviour of masonry bridges designed as hydrostatic shells

Emil Adiels, Mats Ander, Fredrik Boman et al
Proceedings of the IASS 2024 Symposium, Redefining the Art of Structural Design
Paper in proceeding
2023

The numerical simulation of standard concrete tests and steel reinforcement using force flux peridynamics

Jens Olsson, Mats Ander, Christopher John Kenneth Williams
Structural Concrete. Vol. 24 (2), p. 2071-2092
Journal article
2023

Architectural Knitted Windbreaks for Improved Wind Comfort in the City: A Wind Tunnel Study of Custom-Designed Porous Textile Screens

Erica Hörteborn, Malgorzata Zboinska, Valery Chernoray et al
Buildings. Vol. 13 (1)
Journal article
2022

Adaptive bone re-modelling for optimization of porous structural components

Jens Olsson, Mats Ander, Christopher John Kenneth Williams
Proceedings of the IASS Annual Symposium 2022 and APCS 2022
Paper in proceeding
2021

The Use of Peridynamic Virtual Fibres to Simulate Yielding and Brittle Fracture

Jens Olsson, Mats Ander, Christopher John Kenneth Williams
Journal of Peridynamics and Nonlocal Modeling. Vol. 3 (4), p. 348-382
Journal article
2021

Architectural design methods used in engineering Master's thesis projects

Alexander Sehlström, Mats Ander, Karl-Gunnar Olsson
Other conference contribution
2019

Isogeometric analysis and form finding for thin elastic shells

Joel Hilmersson, Jens Olsson, Mats Ander et al
IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures; Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures, FORM and FORCE, p. 153-160
Paper in proceeding
2019

A building of unlimited height

Mats Ander, Jens Olsson, Paul Shepherd et al
IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures; Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures, FORM and FORCE, p. 1465-1472
Paper in proceeding
2019

Architecture and Engineering - education of Form and Force

Karl-Gunnar Olsson, Ulf Janson, Magnus Persson et al
IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures; Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures, FORM and FORCE, p. 145-152
Paper in proceeding
2019

Textile Informed Structures - How to Braid a Roof, Translating the logic of textile structure into the scale of architecture

Linda Wallander, Malin Borgny, Delia Dumitrescu et al
IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures; Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures, FORM and FORCE, p. 2756-2763
Paper in proceeding
2018

Form Finding Nodal Connections in Grid Structures

Martha Tsigkari, Francis Aish, Jens Olsson et al
Proceedings of the IASS Symposium 2018
Paper in proceeding
2018

The use of virtual work for the formfinding of fabric, shell and gridshell structures

Emil Adiels, Mats Ander, Erica Hörteborn et al
Proceedings of the Advances in Architectural Geometry conference 2018, p. 286-315
Paper in proceeding
2018

Resedagbok England/Wales - Arkitektur & teknik 2018

Felicia Andersson, Rebecca Engvall, Maria Karlsson et al
Other
2017

Constructive allignment by use of project assignments in solid mechanics courses

Mats Ander, Jim Brouzoulis, Fredrik Larsson
Svenska mekanikdagar 2017, Uppsala 12-13 juni
Paper in proceeding
2017

Prestressed gridshell structures

Alexander Sehlström, Mats Ander, Christopher John Kenneth Williams et al
Proceedings of the IASS Symposium 2017
Paper in proceeding
2017

Sculptural form finding with bending action

Jens Olsson, Christopher John Kenneth Williams, Mats Ander et al
International association for shell and spatial structures (IASS)
Paper in proceeding
2017

Brick patterns on shells using geodesic coordinates

Emil Adiels, Mats Ander, Christopher John Kenneth Williams
Proceedings of the IASS Annual Symposium 2017. IASS Annual Symposium 2017; Hamburg, Germany; 25 - 28 September 2017
Paper in proceeding
2017

On the implementation of isogeometric analysis for thin shells

Puria Safari Hesari, Sara Almstedt, Fredrik Larsson et al
J. Hölsberg, N.L. Pedersen (Eds.), 30th Nordic Seminar on Computational Mechanics, NSCM-30, 2017
Paper in proceeding
2017

Constructive alignment in solid mechanics courses by means of project assignments

Mats Ander, Jim Brouzoulis
6: e Utvecklingskonferensen för Sveriges ingenjörsutbildningar, Chalmers tekniska högskola, 22 -23 november 2017
Paper in proceeding
2016

Implant stability and bone remodeling up to 84 days of implantation with an initial static strain. An in vivo and theoretical investigation

A. Halldin, Y. Jinno, S. Galli et al
Clinical Oral Implants Research. Vol. 27 (10), p. 1310-1316
Journal article
2016

På fötter genom England 2016

Årskurs 2 Arkitektur & teknik, Jessica Aranius, Elin Lidén et al
Other
2016

Conceptual Design and Analysis of Membrane Structures

Erica Henrysson, Jens Olsson, Al Fisher et al
Proceedings of 29th Nordic Seminar on Computational Mechanics – NSCM29 (S8:2:c)
Other conference contribution
2016

On multi-objective topology optimization and tracing of Pareto-optimal structures

Alexander Sehlström, Håkan Johansson, Mats Ander
Other conference contribution
2016

Structural design and analysis of elastically bent gridshells: The development of a numerical simulation tool

Emil Poulsen, Mats Ander, Niklas Johansson
Larsson, R. (Editor), Proceedings of 29th Nordic Seminar on Computational Mechanics – NSCM29
Paper in proceeding
2015

London - Wales - East Anglia, En resedagbok 2015

Årskurs 2 Arkitektur & teknik, Emma Nordhamn, Sara Olsson et al
Other
2015

Simulation of the mechanical interlocking capacity of a rough bone implant surface during healing

A. Halldin, Mats Ander, M. Jacobsson et al
BioMedical Engineering Online. Vol. 14 (1)
Journal article
2014

On a Constitutive Material Model to Capture Time Dependent Behaviour of Cortical Bone

Anders Halldin, Mats Ander, Magnus Jacobsson et al
World Journal of Mechanics. Vol. 4 (11), p. 348-361
Journal article
2014

Studenterna lyfter sig själva i Studion för Mekanik och Hållfasthetslära

Mats Ander, Peter Folkow
KUL2014
Paper in proceeding
2014

The effect of surface roughness on dental implant bone interface strength

Anders Halldin, Mats Ander, Stig Hansson
Other conference contribution
2011

Simulation of wheel-rail contact and damage in switches & crossings

Anders Johansson, Björn Pålsson, Magnus Ekh et al
Wear. Vol. 271 (1-2), p. 472-481
Journal article
2009

Development, accomplishment and evaluation of a project course in applied mechanics---Lessons learnt

Mats Ander, Tomas Grönstedt, Thomas Abrahamsson et al
Svenska mekanikdagarna, Södertälje 2009, 15-17-juni, Session 7:4-Utbildning, sid 99 (1 page abstract), p. 99-
Other conference contribution
2009

Simulation of wheel-rail contact and damage in switches & crossings

Anders Johansson, Björn Pålsson, Magnus Ekh et al
8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 15th-18th September, Firenze, Italy, p. 987-996
Paper in proceeding
1999

Finite Element Analysis of Geometrically Non-Linear Structures Using Translational Variables

Mats Ander, Alf Samuelsson
International Journal for Numerical Methods in Engineering. Vol. 46, p. pp. 1367-1383
Journal article
1997

Initial Imperfections in Structures

Alf Samuelsson, Mats Ander
Report

Download publication list

You can download this list to your computer.

Filter and download publication list

As logged in user (Chalmers employee) you find more export functions in MyResearch.

You may also import these directly to Zotero or Mendeley by using a browser plugin. These are found herer:

Zotero Connector
Mendeley Web Importer

The service SwePub offers export of contents from Research in other formats, such as Harvard and Oxford in .RIS, BibTex and RefWorks format.

Showing 2 research projects

2019–2022

3D printed nodes for structural steelwork connections in civil engineering and architecture

Christopher John Kenneth Williams Architectural theory and methods
Mats Ander Material and Computational Mechanics
Jens Olsson Architectural theory and methods
Karl-Gunnar Olsson Architectural theory and methods
Eduard Hryha Materials and manufacture
Formas

2011–2015

The optimal dental implant: program for improvement of clinical performance, improvement of quality of life for the patient, reduction of the need of animal studies

Anders Halldin Unknown organization
Magnus Jacobsson Unknown organization
Stig Hansson Unknown organization
Mats Ander Material and Computational Mechanics
Ann Wennerberg Unknown organization
Swedish Research Council (VR)
DENTSPLY Implants

There might be more projects where Mats Ander participates, but you have to be logged in as a Chalmers employee to see them.