Estimating the Solids Circulation Rate in a 100-kW Chemical Looping Combustor
Artikel i vetenskaplig tidskrift, 2017

Chemical looping combustion (CLC) is a technology of CO2 capture that can drastically reduce its cost. The solids circulation inside a 100-kW chemical looping combustor was investigated using a novel oxygen carrier called Sinaus by adding fuel batches to the fuel reactor. The decline and subsequent rise of oxygen concentration in the air reactor after each addition was used to determine the residence time of solids in the fuel reactor and adjacent vessels. The obtained residence time, in combination with the solids inventory, determined the solids circulation for a particular batch experiment. After performing a number of such experiments, the above circulation was correlated with other experimental data, revealing a good correlation between the solids flow at the top of the air reactor riser and the actual circulation obtained using batch tests. The relationship between global circulation, <(m) over dot>, and the mass flow in the air reactor riser, <(m) over dot>(riser), was found to be linear within the investigated interval, being described as <(m) over dot> = 6.6 + 0.057<(m) over dot>(riser). Although this correlation was valid only for the investigated reactor system, the approach used to obtain the solids circulation could be used to derive a similar correlation for any dual fluidized bed system.

solids circulation

Chemical-looping combustion

oxygen carrier

circulating fluidized bed

carbon capture

Författare

Carl Johan Linderholm

Chalmers, Energi och miljö, Energiteknik

Matthias Schmitz

Chalmers, Energi och miljö, Energiteknik

Anders Lyngfelt

Chalmers, Energi och miljö, Energiteknik

Chemical Engineering Sciences

0009-2509 (ISSN)

Vol. 2017 351-359

Novel combustion principle with inherent capture of CO2 using combined manganese oxides that release oxygen (NOCO2)

Europeiska kommissionen (FP7), 2012-03-01 -- 2017-02-28.

Drivkrafter

Hållbar utveckling

Ämneskategorier

Energiteknik

Styrkeområden

Energi

DOI

10.1016/j.ces.2017.05.025