Testing and validation of safety logic in the virtual environment
Artikel i vetenskaplig tidskrift, 2019

This paper presents an approach for testing safety PLC logic in a virtual environment, using the IOCO testing relation as validation criteria. Manufacturing companies more and more rely on virtual commissioning to reduce the physical commissioning time by testing and debugging the PLC logic of the nominal behavior prior to physical commissioning. However, safety PLC logic testing is still carried out on real systems manually. This manual practice of safety logic validation hinders industry to exploit the full potential of virtual commissioning to reduce the physical commissioning time. The proposed approach assists manufacturing companies in the validation of safety PLC logic using a simulation model before the factory acceptance testing phase. Using the proposed approach, a simulation model can be used to test the safety PLC logic and prepare better for the factory acceptance testing phase, hence, further reduction in physical commissioning time can be achieved.

Safety logic

Virtual commissioning

Virtual preparation

PLC logic

Simulation model

Författare

Adnan Khan

Chalmers, Elektroteknik, System- och reglerteknik, Automation

Petter Falkman

Chalmers, Elektroteknik, System- och reglerteknik, Automation

Martin Fabian

Chalmers, Elektroteknik, System- och reglerteknik, Automation

CIRP Journal of Manufacturing Science and Technology

1755-5817 (ISSN) 1878-0016 (eISSN)

Ämneskategorier

Produktionsteknik, arbetsvetenskap och ergonomi

Övrig annan teknik

Inbäddad systemteknik

DOI

10.1016/j.cirpj.2019.07.002

Mer information

Senast uppdaterat

2019-11-08