Generic finite element models of human ribs, developed and validated for stiffness and strain prediction - To be used in rib fracture risk evaluation for the human population in vehicle crashes
Artikel i vetenskaplig tidskrift, 2020

To enable analysis of the risk of occupants sustaining rib fractures in a crash, generic finite element models of human ribs, one through twelve, were developed. The generic ribs representing an average sized male, were created based on data from several sources and publications. The generic ribs were validated for stiffness and strain predictions in anterior-posterior bending. Essentially, both predicted rib stiffness and rib strain, measured at six locations, were within one standard deviation of the average result in the physical tests. These generic finite elements ribs are suitable for strain-based rib fracture risk predictions, when loaded in anterior-posterior bending. To ensure that human variability is accounted for in future studies, a rib parametric study was conducted. This study shows that the rib cross-sectional height, i.e., the smallest of the cross-sectional dimensions, accounted for most of the strain variance during anterior-posterior loading of the ribs. Therefore, for future rib fracture risk predictions with morphed models of the human thorax, it is important to accurately address rib cross-sectional height.

Strain validation

Generic rib

Finite element model

Human body model


Johan Iraeus

Chalmers, Mekanik och maritima vetenskaper, Fordonssäkerhet

Karin Brolin

Chalmers, Mekanik och maritima vetenskaper, Fordonssäkerhet

Bengt Pipkorn

Chalmers, Mekanik och maritima vetenskaper

Journal of the Mechanical Behavior of Biomedical Materials

1751-6161 (ISSN)

Vol. 106 UNSP 103742

Utveckling av implementerbara skadekriterier för ryggrad, bröst och huvud för humanmodeller

VINNOVA (2015-04864), 2016-02-01 -- 2018-12-31.


Geofysisk teknik

Teknisk mekanik






Mer information

Senast uppdaterat