Mohammad Sadegh Rouhi

Showing 25 publications

2023

Large Scale Additive Manufacturing of Recycled Polymer Composites

Mohammad Sadegh Rouhi, Robin Teigland, Johan Landberg et al
Proceedings of the American Society for Composites - 38th Technical Conference, ASC 2023, p. 2405-2411
Paper in proceeding
2019

Modeling of the vacuum assisted resin transfer molding process

Da Wu, Ragnar Larsson, Mohammad Sadegh Rouhi
ICCM22 Proceedings
Paper in proceeding
2019

Modeling and Experimental Validation of the VARTM Process for Thin-Walled Preforms

Da Wu, Ragnar Larsson, Mohammad Sadegh Rouhi
Polymers. Vol. 11 (12)
Journal article
2019

Modeling and experimental validation of the vartm process

Da Wu, Ragnar Larsson, Mohammad Sadegh Rouhi
ICCM International Conferences on Composite Materials. Vol. 2019-August
Paper in proceeding
2018

Damage growth and strain localization in compressive loaded fiber reinforced composites

Ragnar Larsson, Renaud Gutkin, Mohammad Sadegh Rouhi
Mechanics of Materials. Vol. 127, p. 77-90
Journal article
2016

Holistic modeling of composites manufacturing using poromechanics

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
Advanced Manufacturing: Polymer and Composites Science. Vol. 2
Journal article
2016

Modelling of kink-band growth based on the geometrically non-linear theory

Ragnar Larsson, Mohammad Sadegh Rouhi, Renaud Gutkin
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
Paper in proceeding
2016

Damage growth in compressive loadded fibre reinforced composites

Ragnar Larsson, Renaud Gutkin, Mohammad Sadegh Rouhi
International congress on theoretical and applied mechanics (XXIV ICTAM)
Paper in proceeding
2015

Experimental assessment of coupled dual-scale flow-deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
Composites Part A: Applied Science and Manufacturing. Vol. 76, p. 215-223
Journal article
2015

Poromechanical Modeling of Composites Manufacturing

Mohammad Sadegh Rouhi
Doctoral thesis
2014

Process modeling of composite materials - a holistic and generic simulation tool using poromechanics

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
Proceedings of the 12th International Conference on Flow Processing in Composite Materials (FPCM12), Enschede, Netherlands, 14-16 July 2014
Paper in proceeding
2014

Poromechanical modelling the pre- and post-filling flows in composite manufacturing

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki
14th European Mechanics of Materials Conference (EMMC14)
Paper in proceeding
2013

Modeling of coupled dual-scale flow–deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
Composites Part A: Applied Science and Manufacturing. Vol. 46 (1), p. 108-116
Journal article
2013

FE modeling and numerical implemtation of flow-deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
ICCM International Conferences on Composite Materials. Vol. 2013-July, p. 5292-5299
Paper in proceeding
2013

Modeling dual-scale flow-deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
Proc. of the 26th Nordic Seminar on Computational Mechanics (NSCM26), Oslo, Norway, 23-25 October 2013
Paper in proceeding
2013

MODELLING DUAL-SCALE FLOW-DEFORMATION PROCESSES IN COMPOSITES MANUFACTURING

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
19th International Conference on Composite Material (ICCM19) - Montreal - Canada 2013
Paper in proceeding
2013

Process Modeling of Composite Manufacturing

Mohammad Sadegh Rouhi
Licentiate thesis
2012

MODELING THE CONSTITUTIVE RESPONSE OF AN ANISOTROPIC DUAL-SCALE FLOW

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
11th International Conference on Flow Processing in Composite Materials (FPCM11) - Auckland - New Zealand 2012
Paper in proceeding
2012

Composite manufacturing modeling using porous media theory

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
25th Nordic Seminar on Computational Mechanics (NSCM25), Lund, Swede, 25-26 October 2012, p. 295-298
Paper in proceeding
2012

Free surface flow and preform deformation in composites manufacturing based on porous media theory

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki
European Journal of Mechanics, A/Solids. Vol. 31 (1), p. 1-12
Journal article
2012

CONSTITUTIVE MODELLING OF ANISOTROPIC TWO-SCALE FLOW

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
15th European Conference on Composite Material (ECCM15) - Venice- Italy 2012
Paper in proceeding
2011

Modeling resin flow, preform deformations and residual stresses in RTM manufacturing

Mohammad Sadegh Rouhi, Ragnar Larsson, Maciej Wysocki
Proc. of International Conference on Manufacturing of Advanced Composites, ICMAC 2011, Belfast, Northern Ireland
Paper in proceeding
2011

Resin Flow and Preform Deformation in Composites Manufacturing Based on a Partially Saturated Porous Medium

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki
Computational Plasticity XI - Fundamentals and applications
Paper in proceeding
2010

Infusion modelling using two-phase porous media theory

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki
Proc. IV European Conference on Computational Mechanics (ECCM IV 2010), Paris, France
Paper in proceeding
2010

Modeling resin flow and preform deformation in composite manufacturing based on partially saturated porous media theory

Mohammad Sadegh Rouhi, Ragnar Larsson, Maciej Wysocki
Procedeing of 23rd Nordic Seminar on Computational Mechanics, p. 142-145
Paper in proceeding

Download publication list

You can download this list to your computer.

Filter and download publication list

As logged in user (Chalmers employee) you find more export functions in MyResearch.

You may also import these directly to Zotero or Mendeley by using a browser plugin. These are found herer:

Zotero Connector
Mendeley Web Importer

The service SwePub offers export of contents from Research in other formats, such as Harvard and Oxford in .RIS, BibTex and RefWorks format.

There are no projects.
There might be more projects where Mohammad Sadegh Rouhi participates, but you have to be logged in as a Chalmers employee to see them.