Mats Norell

Senior Lecturer at Materials and manufacture

Source: chalmers.se
Image of Mats Norell

Showing 33 publications

2021

Micropitting and microstructural evolution during gear testing -from initial cycles to failure

Dinesh Mallipeddi, Mats Norell, V. M.Subbaramaiah Naidu et al
Tribology International. Vol. 156
Journal article
2019

Effect of Running-In (Load and Speed) on Surface Characteristics of Honed Gears

Dinesh Mallipeddi, Mats Norell, M. Sosa et al
Tribology Transactions. Vol. 62 (3), p. 412-418
Journal article
2019

The effect of manufacturing method and running-in load on the surface integrity of efficiency tested ground, honed and superfinished gears

Dinesh Mallipeddi, Mats Norell, M. Sosa et al
Tribology International. Vol. 131, p. 277-287
Journal article
2017

Effect of running-in - load and speed - on surface characteristics of honed gears

Dinesh Mallipeddi, Mats Norell, Mario Sosa et al
World Tribology Conference 2017
Other conference contribution
2017

THERMAL DECOMPOSITION of N-EXPANDED AUSTENITE IN 304l AND 904l STEELS

Giulio Maistro, S. A. Perez-Garcia, Mats Norell et al
Surface Engineering. Vol. 33 (4), p. 319-326
Journal article
2017

Influence of running-in on surface characteristics of efficiency tested ground gears

Dinesh Mallipeddi, Mats Norell, M. Sosa et al
Tribology International. Vol. 115, p. 45-58
Journal article
2015

Surface oxidation behavior of Ti-6Al-4V manufactured by Electron Beam Melting (EBM (R))

J. Karlsson, Mats Norell, U. Ackelid et al
Journal of Manufacturing Processes. Vol. 17 (1), p. 120-126
Journal article
2015

Stress distribution over gear teeth after grinding, running-in and efficiency testing

Dinesh Mallipeddi, Mats Norell, Mario Sosa et al
VDI-Berichte. Vol. 2, p. 973-984
Other conference contribution
2015

Forskningsintegrerad undervisning: Hur? och Varför?

Åsa Fasth Berglund, Mats Norell, Jonas Sjöblom
KUL konferensen
Other conference contribution
2015

A Microstructural and Kinetic Investigation of the KCl-Induced Corrosion of an FeCrAl Alloy at 600 A degrees C

Niklas Israelsson, K.A. Unocic, Kristina M Hellström et al
Oxidation of Metals. Vol. 84 (1-2), p. 105-127
Journal article
2014

The Initial Oxide Scale Development on a Model FeNiCrAl Alloy at 900 degrees C in Dry and Humid Atmosphere: A Detailed Investigation

Josefin Hall, Kristina M Hellström, Jan-Erik Svensson et al
Oxidation of Metals. Vol. 82 (3-4), p. 225-247
Journal article
2014

Analysis of wear debris in rolling contact fatigue cracks of pearlitic railway wheels

Krste Cvetkovski, Johan Ahlström, Mats Norell et al
Wear. Vol. 314 (1-2), p. 51-56
Journal article
2014

Mitigation of Fireside Corrosion in Power Plants: The Combined Effect of Sulfur Dioxide and Potassium Chloride on the Corrosion of a FeCrAl Alloy

Kristina M Hellström, Josefin Hall, Per Malmberg et al
Energy & Fuels. Vol. 28 (9), p. 6116-6129
Journal article
2014

Multi-technique characterization of low-temperature plasma nitrided austenitic AISI 304L and AISI 904L stainless steel

Yu Cao, Giulio Maistro, Mats Norell et al
Surface and Interface Analysis. Vol. 46 (10-11), p. 856-860
Journal article
2013

Role of Nitrogen Uptake During the Oxidation of 304L and 904L Austenitic Stainless Steels

Yu Cao, Mats Norell
Oxidation of Metals. Vol. 80 (5-6), p. 479-491
Journal article
2013

Characterization of surface oxides on water-atomized steel powder by XPS/AES depth profiling and nano-scale lateral surface analysis

Dimitris Chasoglou, Eduard Hryha, Mats Norell et al
Applied Surface Science. Vol. 268, p. 496-506
Journal article
2013

Corrosion at the urea injection in SCR-system during component test

Johanna Nockert, Mats Norell
Materials and Corrosion - Werkstoffe und Korrosion. Vol. 64 (1), p. 34-42
Journal article
2013

Surface characterisation of fine inert gas and water atomised stainless steel 316L powders: formation of thermodynamically unstable surface oxide phases

Y. Hedberg, Mats Norell, J Hedberg et al
Powder Metallurgy. Vol. 56 (2), p. 158-163
Journal article
2012

Influence of surface oxide characteristics and speciation on corrosion, electrochemical properties and metal release of atomized 316L stainless steel powders

Y. Hedberg, Mats Norell, P. Linhardt et al
International Journal of Electrochemical Science. Vol. 7 (12), p. 11655-11677
Journal article
2012

Corrosion of stainless steels in simulated diesel exhaust environment with urea

Johanna Nockert, Lars Nyborg, Mats Norell
Materials and Corrosion - Werkstoffe und Korrosion. Vol. 63 (5), p. 388-395
Journal article
2011

Comparison of microstructure in Ni-Al single splats and millimeter sized drops

Manjusha Battabyal, Uta Klement, Mats Norell et al
Surface Modification Technologies XXV, p. 3-12
Paper in proceeding
2011

Grain boundary microstructure and fatigue crack growth in Allvac 718Plus superalloy

Leif Viskari, Yu Cao, Mats Norell et al
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. Vol. 528 (6), p. 2570-2580
Journal article
2008

Effect of Temperature Gradient and Sulphur Dioxide Addition on Erosion-corrosion of Iron- and Nickel-based Alloys

Anna Nafari, Mats Norell, Urban Paul Einar Jelvestam et al
Materials at High Temperatures. Vol. 25 (1), p. 1-16
Journal article
2008

Study of Nb/Al Interface Combining Spectroscopy of Reflected Electrons with Ion Sputtering

A.V. Lubenchenko, V.P. Afanas´ev, M.V. Lukashevsky et al
Preprint
2008

Scale growth on austenitic alloys under KCl deposits at 500 deg C

Petter Andersson, Mats Norell
Materials Science Forum. Vol. 595-598 (I), p. 333-342
Journal article
2008

High temperature corrosion of cast alloys in exhaust environments I-ductile cast irons

Frédéric Tholence, Mats Norell
Oxidation of Metals. Vol. 69 (1-2), p. 13-36
Journal article
2008

Study of Nb/Al interface combining spectroscopy of reflected electrons with ion sputtering

A.V. Lubenchenko, V.P. Afanas´ev, M.V. Lukashevsky et al
Journal of Physics: Conference Series. Vol. 97, p. 012210-
Journal article
2008

High temperature corrosion of cast alloys in exhaust environments. II-Cast stainless steels

Frédéric Tholence, Mats Norell
Oxidation of Metals. Vol. 69 (1-2), p. 37-62
Journal article
2007

Study of A1/Nb interface by spectroscopy of reflected electrons

V.P. Afanas´ev, A.V. Lubenchenko, M.V. Lukashevsky et al
Journal of Applied Physics. Vol. 101 (064912), p. 1-6
Journal article
2005

Field test of superheater corrosion in a CFB waste boiler: Part II - Scale formation characteristics

Petter Andersson, Mats Norell
Materials and Corrosion. Vol. 56 (8), p. 550 - 560
Journal article
2005

Nitride precipitation during high temperature corrosion of ductile cast irons in synthetic exhaust gases

Frédéric Tholence, Mats Norell
Journal of Physics and Chemistry of Solids. Vol. 66 (2-4), p. 530 - 534
Journal article
2005

Field test of superheater corrosion in a CFB waste boiler: Part I - Metal loss characteristics

Petter Andersson, Mats Norell
Materials and Corrosion. Vol. 56 (7), p. 449 - 458
Journal article

Download publication list

You can download this list to your computer.

Filter and download publication list

As logged in user (Chalmers employee) you find more export functions in MyResearch.

You may also import these directly to Zotero or Mendeley by using a browser plugin. These are found herer:

Zotero Connector
Mendeley Web Importer

The service SwePub offers export of contents from Research in other formats, such as Harvard and Oxford in .RIS, BibTex and RefWorks format.

There are no projects.
There might be more projects where Mats Norell participates, but you have to be logged in as a Chalmers employee to see them.