Mats Norell

Micropitting and microstructural evolution during gear testing -from initial cycles to failure

2019

Effect of Running-In (Load and Speed) on Surface Characteristics of Honed Gears

The effect of manufacturing method and running-in load on the surface integrity of efficiency tested ground, honed and superfinished gears

Effect of running-in - load and speed - on surface characteristics of honed gears

THERMAL DECOMPOSITION of N-EXPANDED AUSTENITE IN 304l AND 904l STEELS

2017

Influence of running-in on surface characteristics of efficiency tested ground gears

Surface oxidation behavior of Ti-6Al-4V manufactured by Electron Beam Melting (EBM (R))

Stress distribution over gear teeth after grinding, running-in and efficiency testing

Forskningsintegrerad undervisning: Hur? och Varför?

2015

A Microstructural and Kinetic Investigation of the KCl-Induced Corrosion of an FeCrAl Alloy at 600 A degrees C

The Initial Oxide Scale Development on a Model FeNiCrAl Alloy at 900 degrees C in Dry and Humid Atmosphere: A Detailed Investigation

Analysis of wear debris in rolling contact fatigue cracks of pearlitic railway wheels

Mitigation of Fireside Corrosion in Power Plants: The Combined Effect of Sulfur Dioxide and Potassium Chloride on the Corrosion of a FeCrAl Alloy

2014

Multi-technique characterization of low-temperature plasma nitrided austenitic AISI 304L and AISI 904L stainless steel

2013

Role of Nitrogen Uptake During the Oxidation of 304L and 904L Austenitic Stainless Steels

Characterization of surface oxides on water-atomized steel powder by XPS/AES depth profiling and nano-scale lateral surface analysis

Corrosion at the urea injection in SCR-system during component test

Surface characterisation of fine inert gas and water atomised stainless steel 316L powders: formation of thermodynamically unstable surface oxide phases

2012

Influence of surface oxide characteristics and speciation on corrosion, electrochemical properties and metal release of atomized 316L stainless steel powders

Corrosion of stainless steels in simulated diesel exhaust environment with urea

Comparison of microstructure in Ni-Al single splats and millimeter sized drops

Grain boundary microstructure and fatigue crack growth in Allvac 718Plus superalloy

Effect of Temperature Gradient and Sulphur Dioxide Addition on Erosion-corrosion of Iron- and Nickel-based Alloys

Study of Nb/Al Interface Combining Spectroscopy of Reflected Electrons with Ion Sputtering

Scale growth on austenitic alloys under KCl deposits at 500 deg C

High temperature corrosion of cast alloys in exhaust environments I-ductile cast irons

Study of Nb/Al interface combining spectroscopy of reflected electrons with ion sputtering

High temperature corrosion of cast alloys in exhaust environments. II-Cast stainless steels

Study of A1/Nb interface by spectroscopy of reflected electrons

Field test of superheater corrosion in a CFB waste boiler: Part II - Scale formation characteristics

Nitride precipitation during high temperature corrosion of ductile cast irons in synthetic exhaust gases

Field test of superheater corrosion in a CFB waste boiler: Part I - Metal loss characteristics

Influence of Segregants on Creep Fracture in Powder Metallurgical Martensitic Stainless Steel