Roland Örtengren

Full Professor at Production Systems

Source: chalmers.se
Image of Roland Örtengren

Showing 74 publications

2024

Challenges and opportunities to advance manufacturing research for sustainable battery life cycles

Björn Johansson, Mélanie Despeisse, Jon Bokrantz et al
Frontiers in Manufacturing Technology. Vol. 4
Journal article
2023

Simulation of Ergonomic Assembly Through a Digital Human Modeling Software

Henrik Söderlund, Leonard Bogojevic, Liang Gong et al
Lecture Notes in Networks and Systems. Vol. 744 LNNS, p. 220-228
Paper in proceeding
2023

Battery Production Systems: State of the Art and Future Developments

Mélanie Despeisse, Björn Johansson, Jon Bokrantz et al
IFIP Advances in Information and Communication Technology. Vol. 692 AICT, p. 521-535
Paper in proceeding
2021

Cognitive Ergonomics of Assembly Work from a Job Demands–Resources Perspective: Three Qualitative Case Studies

Matilda Wollter Bergman, Cecilia Berlin, Maral Babapour Chafi et al
International Journal of Environmental Research and Public Health. Vol. 18 (23)
Journal article
2021

COREQ checklist for the research project PreKo, 2018-2021

Cecilia Berlin, Ann-Christine Falck, Matilda Wollter Bergman et al
Other
2021

A Systemic Overview of Factors Affecting the Cognitive Performance of Industrial Manual Assembly Workers

Cecilia Berlin, Matilda Wollter Bergman, Maral Babapour Chafi et al
Lecture Notes in Networks and Systems. Vol. 221 LNNS, p. 371-381
Paper in proceeding
2018

Ergonomic risk assessment in DHM tools employing motion data - exposure calculation and comparison to epidemiological reference data

Ida-Märta Rhen, Mikael Forsman, Roland Örtengren et al
International Journal of Human Factors Modelling and Simulation. Vol. 6 (1)
Journal article
2017

Adaptive regression model for synthesizing anthropometric population data

Erik Brolin, Dan Högberg, Lars Hanson et al
International Journal of Industrial Ergonomics. Vol. 59, p. 46-53
Journal article
2017

Proactive assessment of basic complexity in manual assembly: development of a tool to predict and control operator-induced quality errors

Ann-Christine Falck, Roland Örtengren, Mikael Rosenqvist et al
International Journal of Production Research. Vol. 55 (15), p. 4248-4260
Journal article
2017

Exposure and risk quantification for improved relationship assessment in occupational investigations

Roland Örtengren
Osvalder, A.-L., Blomé, M., Bodnar, H. NES 2017 Conference Proceedings "Joy at Work", p. 470-475
Paper in proceeding
2017

Adaptive regression model for prediction of anthropometric data

Erik Brolin, Dan Högberg, Lars Hanson et al
International journal of human factors modelling and simulation. Vol. 5 (4), p. 285-305
Journal article
2017

Noise and artefacts

Roland Örtengren
Electromyography in Ergonomics, p. 97-107
Book chapter
2017

“Power Base” Tactics for Workplace Change – an Interview Study with Industrial Engineers and Ergonomists

Cecilia Berlin, Patrick Neumann, Nancy Theberge et al
Ergonomics. Vol. 60 (5), p. 613-627
Journal article
2017

Basic complexity criteria and their impact on manual assembly quality in actual production

Ann-Christine Falck, Mikael Rosenqvist, Roland Örtengren et al
International Journal of Industrial Ergonomics. Vol. 58, p. 117-128
Journal article
2016

Criteria for assessment of basic assembly complexity

Ann-Christine Falck, Roland Örtengren, Mikael Rosenqvist et al
Procedia CIRP. Vol. 44, p. 424-428
Paper in proceeding
2015

Improved Quality Output through Computer Based Training - an Automotive Assembly Field Study

Lennart Malmsköld, Roland Örtengren, Lars Svensson
Human Factors and Ergonomics In Manufacturing. Vol. 25 (3), p. 304-318
Journal article
2014

Assembly failures and action cost in relation to complexity level and assembly ergonomics in manual assembly (part 2)

Ann-Christine Falck, Roland Örtengren, Mikael Rosenqvist
International Journal of Industrial Ergonomics. Vol. 44 (2014), p. 455-459
Journal article
2014

Avenues of entry: how industrial engineers and ergonomists access and influence human factors and ergonomics issues

Cecilia Berlin, Per Medbo, Nancy Theberge et al
European Journal of Industrial Engineering. Vol. 8 (3), p. 325-348
Journal article
2013

Considerations for aggregation of motion-captured files in structured databases for DHM applications

Ali Keyvani, Dan Lämkull, Gunnar Bolmsjö et al
DHM 2013, Second International Digital Human Modeling Symposium
Paper in proceeding
2013

Using Methods-Time Measurement to Connect Digital Humans and Motion Databases

Ali Keyvani, Dan Lämkull, Gunnar Bolmsjö et al
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Vol. 8026 (PART 2), p. 343-352
Paper in proceeding
2012

Relationship between complexity in manual assembly work, ergonomics and assembly quality

Ann-Christine Falck, Roland Örtengren, Mikael Rosenqvist
Ergonomics for Sustainability and Growth, NES 2012 (Nordiska Ergonomisällskapet) konferens, Saltsjöbaden, Stockholm, 19-22 augusti, 2012 (Book of abstracts, Abstract B4:2), p. 91-
Paper in proceeding
2011

Schema for Motion Capture Data Management

Ali Keyvani, Henrik Johansson, Mikael Ericsson et al
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Vol. 6777, p. 99-108
Paper in proceeding
2010

The Influence of Poor Assembly Ergonomics on Product Quality: A Cost-Benefit Analysis in Car Manufacturing

Ann-Christine Falck, Roland Örtengren, Dan Högberg
Human Factors and Ergonomics In Manufacturing. Vol. 20 (1), p. 24-41 (2010)
Journal article
2009

Corporate-internal vs. national standard – A comparison study of two ergonomics evaluation procedures used in automotive manufacturing

Cecilia Berlin, Roland Örtengren, Dan Lämkull et al
International Journal of Industrial Ergonomics. Vol. 39 (6), p. 940-946
Journal article
2009

Early risk identification and cost-benefit analyses through ergonomics simulation

Ann-Christine Falck, Roland Örtengren, Dan Högberg
Digital Human Modeling for Design and Engineering Conference and Exhibition, DHM 2009; Gothenburg; Sweden; 9 June 2009 through 9 June 2009, p. 10-
Paper in proceeding
2009

Digital human modeling simulation results and their outcomes in reality: A comparative study within manual assembly of automobiles

Roland Örtengren, Dan Lämkull, Lars Hanson
SAE Technical Papers. Vol. 2009
Paper in proceeding
2008

Computer Based Training for Automotive Assembly Operators – a Potential Way to Improve Quality Output

Lennart Malmsköld, Roland Örtengren, Lars Svensson
Interactive Technologies 2008, Conference proceedings
Paper in proceeding
2008

DHM in Automotive Manufacturing Applications

Dan Lämkull, Roland Örtengren, Lennart Malmsköld
Handbook of Digital Human Modeling: Research for Applied Ergonomics and Human Factors Engineering. Duffy, V.G. (Ed.). Taylor & Francis, CRC Press.
Book chapter
2008

Industrial customisation of digital human modelling tools

Dan Högberg, Gunnar Bäckstrand, Dan Lämkull et al
International Journal of Services Operations and Informatics. Vol. 3 (1), p. 53-70
Journal article
2008

National Standard vs. Corporate-Internal Ergonomics Evaluation - an Industrial Case Study

Cecilia Berlin, Roland Örtengren, Dan Lämkull et al
The 40th annual Nordic Ergonomic Society Conference, NES 2008, Reykjavík, Iceland, August 11-13
Paper in proceeding
2008

DHM - Evaluation Tools.

Dan Lämkull, Cecilia Berlin, Roland Örtengren
Handbook of Digital Human Modeling: Research for Applied Ergonomics and Human Factors Engineering (Human Factors & Ergonomics). Vincent. G. Duffy (Ed.). Taylor & Francis, CRC Press.
Book chapter
2008

The influence of Assembly ergonomics on product quality and productivity in car manufacturing - a cost-benefit approach

Ann-Christine Falck, Roland Örtengren, Dan Högberg
Nordic Ergonomics Society Conference (NES), August 11 - 13, 2008, Reykjavik, Island
Paper in proceeding
2008

Risks in Decision making –Learning from the Brent Spar Case

Mohammad Shahriari, Roland Örtengren
Proceedings of the 2008 IEEE- International Conference on Industrial Engineering and Engineering Management (IEEE Catalog Number: CFP08IEI-CDR), p. 1304-1308
Paper in proceeding
2008

Human Errors in Decision Making- Analysis of two historical cases

Mohammad Shahriari, Roland Örtengren, Dessy Aliandrina et al
Journal of Ergonomia IJE&HF. Vol. 30 (1), p. 47-62
Journal article
2008

Uniformity in manikin posturing: A comparison between posture prediction and manual joint manipulation

Dan Lämkull, Lars Hanson, Roland Örtengren
International Journal of Human Factors Modelling and Simulation. Vol. 1 (2), p. 225-243
Journal article
2008

A comparative study of digital human modelling simulation results and their outcomes in reality: A case study within manual assembly of automobiles

Dan Lämkull, Lars Hanson, Roland Örtengren
International Journal of Industrial Ergonomics. Vol. 39, p. 428-441
Journal article
2007

Virtual Training – Towards a Design Framework

Lennart Malmsköld, Roland Örtengren, Blair E. Carlson et al
of World Conference on E-Learning in Corporate, Government, Healthcare, and Higher Education 2007 , Chesapeake, VA, p. 6299-6307
Paper in proceeding
2007

The influence of virtual human model appearance on visual ergonomics posture evaluation.

Dan Lämkull, Lars Hanson, Roland Örtengren
Applied Ergonomics. Vol. 38 (6), p. 713-722
Journal article
2007

Towards Dynamic Ergonomics Analysis of Work Sequences in Virtual Environments.

Dan Högberg, Gunnar Bäckstrand, Dan Lämkull et al
Proceedings of the 17th International Conference on Flexible Automation and Intelligent Manufacturing (2007 FAIM), Philadelphia, USA, June 2007, p. 581-588
Paper in proceeding
2007

Instructor based training versus computer based training - A comparative study

Lennart Malmsköld, Roland Örtengren, Blair Carlson et al
Journal of Educational Technology Systams. Vol. 35 (4), p. 457-478
Journal article
2007

Preparatory Virtual Training of Assembly Operators – an Explorative Study of Different Learning Models

Lennart Malmsköld, Roland Örtengren, Blair E. Carlson et al
Swedish Production Symposium (SPS) 2007, Conference proceedings
Paper in proceeding
2006

Digiatal Human Modeling for CAE Applications

Anders Sundin, Roland Örtengren
Handbook of Human Factors and Ergonomics
Book chapter
2006

Evaluation of the alarm system in an oil refinery – An improvement approach

Mohammad Shahriari, Anirban Shee, Roland Örtengren
journal of Ergonomia, Vol. 28, No. 1, January-March 2006. Vol. 28 (1) (January-March), p. 53-68
Journal article
2006

Consistency in figure posturing results within and between simulation engineers

Dan Lämkull, Lars Hanson, Roland Örtengren
SAE Technical Papers
Paper in proceeding
2006

The development of critical criteria to improve the alarm system in the process industry

Mohammad Shahriari, Anirban Shee, Roland Örtengren
journal of Human Factors and Ergonomics in Manufacturing, Volume 16, No. 3, Summer 2006. Vol. 16 (Summer), p. 321-327
Journal article
2005

ErgoSAM: A preproduction risk identification tool

Jonas Laring, M. Christmansson, Roland Kadefors et al
Human Factors and Ergonomics In Manufacturing. Vol. 15 (3), p. 309-325
Journal article
2005

Influence of Human Model Appearance on Observer Ergonomic Assessment

Lars Hanson, Dan Lämkull, Roland Örtengren
Proceedings of 37th Annual Conference of Nordic Ergonomics Society, p. 77-81
Paper in proceeding
2005

Digital Human Models' Appearance Impact on Observers' Ergonomic Assessment

Dan Lämkull, Lars Hanson, Roland Örtengren
SAE Technical Papers
Journal article
2005

Simulation for Manufacturing Engineering (ViPP)

Jonas Laring, Marita Christmansson, Tania Dukic et al
SAE Transactions Journal of Materials and Manufacturing. Vol. 114 (5), p. 884-889
Paper in proceeding
2005

Industrial production of food - risk surveys of three manufacturing systems from an occupational safety perspective

Petra Willquist, Roland Örtengren
Occupational Ergonomics. Vol. 5 (2), p. 99-110
Journal article
2005

ErgoSAM: A preproduction risk identification tool

Jonas Laring, Marita Christmansson, Roland Kadefors et al
Human Factors and Ergonomics in Manufacturing. Vol. 15 (3), p. 309-325
Journal article
2005

Simulation for manufacturing engineering (ViPP)

Jonas Laring, M. Christmansson, Tania Dukic et al
SAE Technical Papers. Vol. Digital Human Modeling for Design and Engineering Symposium
Journal article
2004

Task-related Field of View Parameters

M. Rönnäng, Dan Lämkull, Tania Dukic et al
SAE 2004 Transactions Journal of Aerospace and proceedings of the 2004 SAE Digital Human Modeling for Design and Engineering Symposium
Paper in proceeding
2004

Analysis of Man-Machine Interaction in a Refinery Control Room, "A case Study"

Mohammad Shahriari, Anirban Shee, Roland Örtengren
Conference Proceedings of IFAC - HMS 2004, Atlanta, USA
Paper in proceeding
2004

Ananlysis of Man-Machine Interaction in a Refinery Control Room” A case study”

Mohammad Shahriari, Anirban Shee, Roland Örtengren
Proceedings of IFAC – HMS 2004 Conference in Atlanta, USA
Paper in proceeding
2004

Task-related field of view parameters

Magnus Rönnäng, Dan Lämkull, Tania Dukic et al
SAE Technical Papers. Vol. 2004
Journal article
2003

Att använda virtuella verktyg för att vidareutveckla Volvo Cars produktionssystem

Tania Dukic, Magnus Rönnäng, Marita Christmansson et al
Report
2002

To use virtual tools for further development of Volvo Car´s production system - A case study of the development of the production system for P28/XC90.

Tania Dukic, Magnus Rönnäng, Marita Christmansson et al
Chalmers, Produkt- och Produktionsutveckling. Rapport nr. 16, p. 112-
Magazine article
2001

Brukarmedverkan vid planering-, bygg- och förvaltningsprocesser inom högskoleväsendet - Några erfarenheter, paralleller och reflektioner

Tomas Engström, Lars Göran Bergqvist, Jan-Erik Gasslander et al
Arbete människa miljö (1), p. 41 - 61
Journal article
2001

Prerequisites for extensive computer manikin analysis - An example with hierarchical task analysis, file exchange protocol and a relational database

Anders Sundin, Marianne Törner, Magnus Rönnäng et al
SAE Digital Human Modeling for Design and Engineering International Conference and Exposition
Paper in proceeding
2000

Proactive human factors engineering analysis in space station design using the computer manikin jack

Anders Sundin, Roland Örtengren, Hans Sjöberg
SAE Digital Human Modeling for Design and Engineering International Conference and Exposition
Paper in proceeding
2000

Inland waterway transportation and handling of hazardous materials - Identification of incident scenarios and estimation of distances of effect.

Mohammad Shahriari, Louis de Mattos, Roland Örtengren
17th European Conference on Operations Research, July 16-19, 2000. Budapest, Hungary.
Paper in proceeding
2000

Risk evaluation of hazardous materialtransported by inland waterways- “Analysis of an emergency situation and organisation responses”

Mohammad Shahriari, Luis de Mattos, Roland Örtengren
proceedings of the 18th ESReDA Seminar, Karlstad Sweden, June 15-16 2000
Paper in proceeding
1998

Knowledge of activities and co-actors and a value-adding perspective on handling operations in a materials flow chain: a pilot study

Mats Johansson, Birgitta Mathisson, Carina Rislund et al
The 14th International Conference on Production Research. Vol. 1, p. 130-133
Paper in proceeding
1995

A Method to Determining the Work Load Dose within Materials Handling

Mats Johansson, Håkan Karlsson, Birgitta Öjmertz et al
Logistik und Arbeit, Vol. 2 (1995), No 6/95, p. 12-15
Magazine article
1995

Work Load Dose and Materials Handling Efficiency - A method to evaluate the design of materials flow systems

Mats Johansson, Håkan Karlsson, Birgitta Öjmertz et al
Proceedings of the 13'th International Conference on Production Research (ICPR 13), Jerusalem, August 1995, p. 739-741
Paper in proceeding
1993

Work load and efficiency when loose-loading parcels in road transport carriers

Mats Johansson, Roland Örtengren
Advances in industrial ergonomics and safety, Nielsen, R. and Jørgensen, K. (eds.), Taylor & Francis, p. 47-53
Other conference contribution
1993

Causes of Ergonomic Problems in Materials Handling and Transportation

Christian Almström, Sven Dahlman, Mats Johansson et al
The ergonomics of manual work, Marras, Karwowski, Smith and Pacholski (eds.), p. 487-490
Paper in proceeding
1993

A Research Program with a Systems Approach to Ergonomic Development of Materials Handling Technology and Work Procedures in Transportation

Christian Almström, Sven Dahlman, Mats Johansson et al
The ergonomics of manual work, Marras, Karwowski, Smith and Pacholski (eds.), Taylor & Francis
Paper in proceeding
1993

Workload when stowing parcels in trailers

Mats Johansson, Roland Örtengren
Logistik und Arbeit (4), p. 27-32
Magazine article
1985

Ergonomics in Meat-Cutting II, Investigation of Physical Worl-Load and Efficiency in Different Systems for Materials Handling

Tomas Engström, Per Hagström, Magnusson Marrianne et al
Ergonomics International, Proceedings of the Ninth Congress of the International Ergonomics Association, Brown, I. D., Goldsmith, R., Combes, K. and Sinclair, M. A. (eds.), Bournemouth, p. 250 - 252
Magazine article
1985

Ergonomiskt utformning av styckningsarbete

Roland Örtengren, Per Hagström, M Magnusson et al
Report - Arbetarskyddsfonden
1985

Ergonomiskt utformning av styckningsarbete

Andesson D, Dahlqvist P, Tomas Engström et al
Report - Linköping University

Download publication list

You can download this list to your computer.

Filter and download publication list

As logged in user (Chalmers employee) you find more export functions in MyResearch.

You may also import these directly to Zotero or Mendeley by using a browser plugin. These are found herer:

Zotero Connector
Mendeley Web Importer

The service SwePub offers export of contents from Research in other formats, such as Harvard and Oxford in .RIS, BibTex and RefWorks format.

Showing 1 research projects

2018–2021

A Model for predictive assessment of cognitive workload - PreKo

Cecilia Berlin Production Systems
Åsa Camilla Söderström Design and Human Factors
Matilda Bergman Design and Human Factors
Roland Örtengren Production Systems
Maral Babapour Chafi Design and Human Factors
Ann-Christine Falck Production Systems
AFA Insurance

5 publications exist
There might be more projects where Roland Örtengren participates, but you have to be logged in as a Chalmers employee to see them.