Mohammad Sadegh Rouhi

Publications (25)
Projects (0)

Showing 25 publications

2023

Large Scale Additive Manufacturing of Recycled Polymer Composites

Mohammad Sadegh Rouhi, Robin Teigland, Johan Landberg et al

Proceedings of the American Society for Composites - 38th Technical Conference, ASC 2023, p. 2405-2411

Paper in proceeding

Show project

2019

Modeling of the vacuum assisted resin transfer molding process

Da Wu, Ragnar Larsson, Mohammad Sadegh Rouhi

ICCM22 Proceedings

Paper in proceeding

2019

Modeling and Experimental Validation of the VARTM Process for Thin-Walled Preforms

Da Wu, Ragnar Larsson, Mohammad Sadegh Rouhi

Polymers. Vol. 11 (12)

Journal article

2019

Modeling and experimental validation of the vartm process

Da Wu, Ragnar Larsson, Mohammad Sadegh Rouhi

ICCM International Conferences on Composite Materials. Vol. 2019-August

Paper in proceeding

Show project

2018

Damage growth and strain localization in compressive loaded fiber reinforced composites

Ragnar Larsson, Renaud Gutkin, Mohammad Sadegh Rouhi

Mechanics of Materials. Vol. 127, p. 77-90

Journal article

2016

Holistic modeling of composites manufacturing using poromechanics

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson

Advanced Manufacturing: Polymer and Composites Science. Vol. 2

Journal article

2016

Modelling of kink-band growth based on the geometrically non-linear theory

Ragnar Larsson, Mohammad Sadegh Rouhi, Renaud Gutkin

ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

Paper in proceeding

2016

Damage growth in compressive loadded fibre reinforced composites

Ragnar Larsson, Renaud Gutkin, Mohammad Sadegh Rouhi

International congress on theoretical and applied mechanics (XXIV ICTAM)

Paper in proceeding

2015

Experimental assessment of coupled dual-scale flow-deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson

Composites Part A: Applied Science and Manufacturing. Vol. 76, p. 215-223

Journal article

2015

Poromechanical Modeling of Composites Manufacturing

Mohammad Sadegh Rouhi

Doctoral thesis

2014

Process modeling of composite materials - a holistic and generic simulation tool using poromechanics

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson

Proceedings of the 12th International Conference on Flow Processing in Composite Materials (FPCM12), Enschede, Netherlands, 14-16 July 2014

Paper in proceeding

2014

Poromechanical modelling the pre- and post-filling flows in composite manufacturing

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki

14th European Mechanics of Materials Conference (EMMC14)

Paper in proceeding

2013

Modeling of coupled dual-scale flow–deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson

Composites Part A: Applied Science and Manufacturing. Vol. 46 (1), p. 108-116

Journal article

2013

FE modeling and numerical implemtation of flow-deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson

ICCM International Conferences on Composite Materials. Vol. 2013-July, p. 5292-5299

Paper in proceeding

2013

Modeling dual-scale flow-deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson

Proc. of the 26th Nordic Seminar on Computational Mechanics (NSCM26), Oslo, Norway, 23-25 October 2013

Paper in proceeding

2013

MODELLING DUAL-SCALE FLOW-DEFORMATION PROCESSES IN COMPOSITES MANUFACTURING

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson

19th International Conference on Composite Material (ICCM19) - Montreal - Canada 2013

Paper in proceeding

2013

Process Modeling of Composite Manufacturing

Mohammad Sadegh Rouhi

Licentiate thesis

2012

MODELING THE CONSTITUTIVE RESPONSE OF AN ANISOTROPIC DUAL-SCALE FLOW

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson

11th International Conference on Flow Processing in Composite Materials (FPCM11) - Auckland - New Zealand 2012

Paper in proceeding

2012

Composite manufacturing modeling using porous media theory

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson

25th Nordic Seminar on Computational Mechanics (NSCM25), Lund, Swede, 25-26 October 2012, p. 295-298

Paper in proceeding

2012

Free surface flow and preform deformation in composites manufacturing based on porous media theory

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki

European Journal of Mechanics, A/Solids. Vol. 31 (1), p. 1-12

Journal article

2012

CONSTITUTIVE MODELLING OF ANISOTROPIC TWO-SCALE FLOW

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson

15th European Conference on Composite Material (ECCM15) - Venice- Italy 2012

Paper in proceeding

2011

Modeling resin flow, preform deformations and residual stresses in RTM manufacturing

Mohammad Sadegh Rouhi, Ragnar Larsson, Maciej Wysocki

Proc. of International Conference on Manufacturing of Advanced Composites, ICMAC 2011, Belfast, Northern Ireland

Paper in proceeding

2011

Resin Flow and Preform Deformation in Composites Manufacturing Based on a Partially Saturated Porous Medium

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki

Computational Plasticity XI - Fundamentals and applications

Paper in proceeding

2010

Infusion modelling using two-phase porous media theory

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki

Proc. IV European Conference on Computational Mechanics (ECCM IV 2010), Paris, France

Paper in proceeding

2010

Modeling resin flow and preform deformation in composite manufacturing based on partially saturated porous media theory

Mohammad Sadegh Rouhi, Ragnar Larsson, Maciej Wysocki

Procedeing of 23rd Nordic Seminar on Computational Mechanics, p. 142-145

Paper in proceeding

Download publication list

You can download this list to your computer.

Filter and download publication list

As logged in user (Chalmers employee) you find more export functions in MyResearch.

You may also import these directly to Zotero or Mendeley by using a browser plugin. These are found herer:

Zotero Connector
Mendeley Web Importer

The service SwePub offers export of contents from Research in other formats, such as Harvard and Oxford in .RIS, BibTex and RefWorks format.

There are no projects.

There might be more projects where Mohammad Sadegh Rouhi participates, but you have to be logged in as a Chalmers employee to see them.