Investigation of Low Temperature Creep Behaviour of PM Steels
Artikel i vetenskaplig tidskrift, 2014

The automotive industry accounts for almost 70% of the total use of water atomized steel powder for powder metallurgical structural components. Nowadays, such components are increasingly used for high demanding applications, where good tolerances and high mechanical properties are combined. However, it has been found that some PM-steel components at low temperature (100-150°C) and high static loading may experience dimensional instability. Hence, high performance diffusion-alloyed powder grade was investigated for low temperature creep/relaxation at 120°C and 20 kN tensile loading (corresponding to 90% of the yield strength of the material). The materials investigated were sinter-hardened and subsequently tempered at different temperatures. Characterization using different techniques (optical microscopy, dedicated testing, X-ray analysis, hardness testing, etc.) was carried out before and after creep testing and it was revealed that each kind of sample exhibited creep/relaxation behaviour correlated to the tempering temperature. The results were compared to test results of components under similar conditions and a good correlation between the test bars and components were found. Moreover, it was found that selecting proper tempering considerably lowered the creep/relaxation response. Hence, the dimensional instability at high static loading conditions for the studied powder metallurgical could be reduced.

Sintered steels

Dimensional stability

Tempering

Creep/relaxation

Författare

Maheswaran Vattur Sundaram

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Henrik Karlsson

Volvo Group

Kumar Babu Surreddi

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Eduard Hryha

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Michael Andersson

Höganäs

Gunnar Åkerström

Volvo Group

Lars Nyborg

Chalmers, Material- och tillverkningsteknik, Yt- och mikrostrukturteknik

Powder Metallurgy Progress

1335-8987 (ISSN)

Vol. 14 2 67-72

Sinterprodukter med hög statisk lastförmåga - inverkan av anlöpning på deformationsstabilitet vid användning

VINNOVA, 2012-10-01 -- 2013-09-30.

Ämneskategorier

Maskinteknik

Metallurgi och metalliska material

Drivkrafter

Hållbar utveckling

Styrkeområden

Produktion

Materialvetenskap

Mer information

Senast uppdaterat

2018-09-27