Cycling stability of Poly(Ethylene Glycol) of six molecular weights: influence of thermal conditions for energy applications
Artikel i vetenskaplig tidskrift, 2020

Utilizing energy storage technologies is beneficial for bridging the gap between supply and demand of energy, and for increasing the share of renewable energy in the energy system. Phase change materials (PCM) offer higher energy density and compact storage design compared to conventional sensible heat storage materials. Over the past years, polyethylene glycol (PEG) gained attention in the PCM field, and several new composites of PEGs are developed for thermal energy storage purposes. PCMs are investigated at a given heating/cooling rate to evaluate their phase change temperature and enthalpy. In the case of PEG, some molecular weights show a melting behavior that depends on the thermal history, such as the crystallization conditions. This study investigates the relationship between the molecular weight of PEGs (400 to 6000 g/mol), cooling/heating rates, and the behavior during phase transitions. To evaluate the performance of PEGs as a PCM under various thermal conditions. Experiments were performed using differential scanning calorimeter (DSC) and the transient plane source method (TPS). All PEG molecular weights were subjected to the same cooling and heating conditions, cooling and heating rate and number of cycles, to decouple the thermal effects from molecular weight effects. The behavior of phase transition for different thermal conditions was thoroughly analyzed and discussed. It was found that the melting temperature range of PEGs with different molecular weight was between 5.8 °C and 62 °C (at 5 °C/min). Each PEG showed unique responses to the cooling and heating rates. Generally, the behavior of the crystallization is changing most between the thermal cycles, while the melting peak is stable regardless of the molecular weight. Finally, it is recommended that the characterization of PEGs and their composites should be conducted at a heating and cooling rate close to the thermal conditions of the intended thermal energy storage application.

Poly(ethylene glycol) (PEG)

Cycling stability

Molecular weight

Phase change material (PCM)

Thermal Energy Storage (TES)

Thermal Analysis

Melting

Crystallization

Författare

Robert Paberit

Chalmers, Arkitektur och samhällsbyggnadsteknik, Byggnadsteknologi

Erik Rilby

Chalmers, Arkitektur och samhällsbyggnadsteknik, Byggnadsteknologi

Johan Göhl

Chalmers, Arkitektur och samhällsbyggnadsteknik, Byggnadsteknologi

Jan Swenson

Chalmers, Fysik, Nano- och biofysik

Zakariaa Refaa

Chalmers, Arkitektur och samhällsbyggnadsteknik, Byggnadsteknologi

Pär Johansson

Chalmers, Arkitektur och samhällsbyggnadsteknik, Byggnadsteknologi

Helen Jansson

Chalmers, Arkitektur och samhällsbyggnadsteknik, Byggnadsteknologi

ACS Applied Energy Materials

25740962 (eISSN)

Vol. 3 11 10578-10589

Termiska energilager

Chalmers, 2020-01-01 -- .

Drivkrafter

Hållbar utveckling

Ämneskategorier

Energiteknik

Annan naturresursteknik

Annan fysik

Styrkeområden

Energi

DOI

10.1021/acsaem.0c01621

Mer information

Senast uppdaterat

2024-01-03