Christer Persson

Full Professor at Engineering Materials

Christer Persson is the Head of Division for Engineering Materials at the Department of Industrial and Materials Science. The research of his own research group is focused on mechanical properties of metals. Important research areas are thermo-mechanical fatigue and contact fatigue, and the applications can be found in the auto, railway and aero industries. In the research are mechanical testing, materials characterization and numerical modeling combined to give knowledge of deformation and fracture mechanisms. The overall aim is to develop better models for life prediction, and thereby contribute to increased safety and lower environmental impact.

Source: chalmers.se

Contact Details ORCID

Publications (30)
Projects (7)

Showing 30 publications

2021

Effects of Temperature on the Evolution of Yield Surface and Stress Asymmetry in A356–T7 Cast Aluminium Alloy

Elanghovan Natesan, Johan Ahlström, Stefan Eriksson et al

Materials. Vol. 14 (24)

Journal article

Show project

2021

Precipitation of γ’ during cooling of nickel-base superalloy Haynes 282

Ceena Joseph, Mattias Thuvander, Christer Persson et al

Philosophical Magazine Letters. Vol. 101 (1), p. 30-39

Journal article

Show project

2020

Effect of Strain Rate on the Deformation Behaviour of A356-T7 Cast Aluminium Alloys at Elevated Temperatures

Elanghovan Natesan, Johan Ahlström, Swathi Kiranmayee Manchili et al

Metals. Vol. 10 (9), p. 1-19

Journal article

Show project

2020

Effect of Temperature on Deformation and Fatigue Behaviour of A356–T7 Cast Aluminium Alloys Used in High Specific Power IC Engine Cylinder Heads

Elanghovan Natesan, Stefan Eriksson, Johan Ahlström et al

Materials. Vol. 13 (5)

Journal article

Show project

2020

Microstructure-dependent deformation behaviour of a low γ′ volume fraction Ni-base superalloy studied by in-situ neutron diffraction

Nitesh Raj Jaladurgam, Hongjia Li, Joe Kelleher et al

Acta Materialia. Vol. 183, p. 182-195

Journal article

Show project

2020

Damage evolution around white etching layer during uniaxial loading

Casey Jessop, Johan Ahlström, Christer Persson et al

Fatigue and Fracture of Engineering Materials and Structures. Vol. 43 (1), p. 201-208

Journal article

2020

Precipitation Kinetics and Morphology of Grain Boundary Carbides in Ni-Base Superalloy Haynes 282

Ceena Joseph, Christer Persson, Magnus Hörnqvist Colliander

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Vol. 51 (12), p. 6136-6141

Journal article

Show project

2020

Effects of Dwell Time on the Deformation and Fatigue Behaviour of A356-T7 Cast Aluminium Alloys Used in High Specific Power IC Engine Cylinder Heads

Elanghovan Natesan, Knut Andreas Meyer, Stefan Eriksson et al

Materials. Vol. 13 (12)

Journal article

Show project

2019

Deformation and fatigue behaviour of A356-T7 cast aluminium alloys used in high specific power IC engines

Elanghovan Natesan, Stefan Eriksson, Johan Ahlström et al

Materials. Vol. 12 (18)

Journal article

Show project

2017

Effect of microstructure on dynamic shear localisation in Alloy 718

Joakim Johansson, Christer Persson, Gabriel Testa et al

Mechanics of Materials. Vol. 109, p. 88-100

Journal article

2017

Influence of heat treatment on the microstructure and tensile properties of Ni-base superalloy Haynes 282

Ceena Joseph, Christer Persson, Magnus Hörnqvist Colliander

Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. Vol. 679, p. 520-530

Journal article

2016

Experimental observations and modelling of cyclic and relaxation behaviour of the Ni-based superalloy Haynes 282

Rebecka Brommesson, Magnus Ekh, Christer Persson

International Journal of Fatigue. Vol. 87, p. 180-191

Journal article

2016

Alloy design for intrinsically ductile refractory high-entropy alloys

Saad Ahmed Sheikh, Samrand Shafeie, Q. Hu et al

Journal of Applied Physics. Vol. 120 (16), p. Art no 164902-

Journal article

2016

Microstructural examination of shear localisation during high-strain-rate deformation of Alloy 718

Joakim Johansson, Christer Persson, Haiping Lai et al

Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. Vol. 662, p. 363-372

Journal article

2016

Influence of carbide distribution on ductility of Haynes®282® forgings

Ceena Joseph, Magnus Hörnqvist Colliander, Rebecka Brommesson et al

13th International Symposium on Superalloys, SUPERALLOYS 2016, Seven Springs Mountain Resort Seven Springs, United States, 11 September 2016 through 15 September 2016, p. 523-529

Paper in proceeding

2014

Anisotropy of Room Temperature Ductility in Haynes 282 Forgings

Ceena Joseph, Magnus Hörnqvist Colliander, Christer Persson

Proceedings of the 8th International Symposium on Superalloy 718 and Derivatives, p. 601-609

Paper in proceeding

2014

Analysis of wear debris in rolling contact fatigue cracks of pearlitic railway wheels

Krste Cvetkovski, Johan Ahlström, Mats Norell et al

Wear. Vol. 314 (1-2), p. 51-56

Journal article

2014

Interaction between cracks and microstructure in three dimensions for rolling contact fatigue in railway rails

Martin Schilke, NASIM LARIJANI, Christer Persson

Fatigue and Fracture of Engineering Materials and Structures. Vol. 37 (3), p. 280-289

Journal article

2014

Rapid thermomechanical tempering of iron–carbon martensite

Krste Cvetkovski, Johan Ahlström, Christer Persson

Materials Science and Technology. Vol. 30 (14), p. 1832-1834

Journal article

2014

Dynamic strain aging in Haynes 282 superalloy

Magnus Hörnqvist Colliander, Ceena Joseph, Christer Persson et al

MATEC Web of Conferences. Vol. 14, p. Art. no. 16002-

Paper in proceeding

2014

Influence of microstructure on deformation behaviour of alloy 718

Joakim Johansson, Christer Persson

8th International Symposium on Superalloy 718 and Derivatives 2014; Pittsburgh; United States; 28 September 2014 through 1 October 2014, p. 799-808

Paper in proceeding

2014

3D characterisation of RCF crack networks

Johan Ahlström, Casey Jessop, Lars Hammar et al

MATEC Web of Conferences. Vol. 12

Paper in proceeding

2014

Mechanical properties of bulk- and hybrid nanocrystalline materials

Uta Klement, Nooshin Mortazavi Seyedeh, Johan Ahlström et al

Proceedings of the Risø International Symposium on Materials Science, p. 349-355

Paper in proceeding

2014

Influence of microstructure of alloy 718 on high strain rate deformation

Joakim Johansson, Christer Persson

Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. Vol. 4 (2014), p. 2563-2570

Paper in proceeding

2013

Initial DNA Interactions of the Binuclear Threading Intercalator Λ,Λ-[μ-bidppz(bipy)4Ru2]4+: An NMR Study with [d(CGCGAATTCGCG)]2

Lisha Wu, Anna Reymer, Christer Persson et al

Chemistry - A European Journal. Vol. 19 (17), p. 5401-5410

Journal article

Show project

2012

White etching layers on the Stockholm local traffic network

Martin Schilke, Christer Persson

Proceedings 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, p. 589-596

Paper in proceeding

2012

Stability of Residual Stresses Created by Shot Peening in Monotonic Loading and at the Presence of Load Reversals - Experiments and Modeling

Kamellia Dalaei, Christer Persson, Birger Karlsson

Journal of Engineering Materials and Technology, Transactions of the ASME. Vol. 134 (2), p. 021010-

Journal article

2012

Subsurface crack networks and RCF surface cracks in pearlitic railway wheels

Krste Cvetkovski, Johan Ahlström, Christer Persson

9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012; Chengdu; China; 27 August 2012 through 30 August 2012, p. 425-431

Paper in proceeding

2011

Modeling of Peening Stress in HVOF Sprayed IN718 Coating

Christophe Lyphout, Christer Persson

Proceedings of the International Thermal Spray Conference ITSC-11

Paper in proceeding

2011

Experiments and modelling of the cyclic behaviour of Haynes 282

Rebecka Brommesson, Lisa Grauers, Magnus Ekh et al

Book of abstracts of 2nd International Conference on Material Modeling (ICMM2), Paris (France)

Other conference contribution

Download publication list

You can download this list to your computer.

Filter and download publication list

As logged in user (Chalmers employee) you find more export functions in MyResearch.

You may also import these directly to Zotero or Mendeley by using a browser plugin. These are found herer:

Zotero Connector
Mendeley Web Importer

The service SwePub offers export of contents from Research in other formats, such as Harvard and Oxford in .RIS, BibTex and RefWorks format.

Showing 7 research projects

2020–2024

Återvinning av insamlad plast från förpackningar

Antal Boldizar Engineering Materials

Ezgi Ceren Boz Noyan Engineering Materials

Christer Persson Engineering Materials

Giada Lo Re Engineering Materials

Plastkretsen (PK) AB:s Stiftelse för forskning

5 publications exist

2019–2024

Characterization of crack initiation and propagation in anisotropic material (CHARMEC MU35)

Johan Ahlström Engineering Materials

Christer Persson Engineering Materials

Daniel Gren Engineering Materials

Magnus Ekh Material and Computational Mechanics

European Commission (EC)

Chalmers Railway Mechanics (CHARMEC)

1 publication exists

2018–2021

Research into enhanced track and switch and crossing system 2 (In2Track-2)

Elena Kabo Dynamics

Fredrik Larsson Material and Computational Mechanics

Dimosthenis Floros Material and Computational Mechanics

Astrid Pieringer Applied Acoustics

Casey Jessop Engineering Materials

Wolfgang Kropp Applied Acoustics

Johan Ahlström Engineering Materials

Xin Li Dynamics

Magnus Ekh Material and Computational Mechanics

Michele Maglio Dynamics

Daniel Gren Engineering Materials

Björn Pålsson Dynamics

Roger Lundén Dynamics

Marko Milosevic Dynamics

Lennart Josefson Material and Computational Mechanics

Emil Aggestam Dynamics

Anders Ekberg Dynamics

Jens Nielsen Dynamics

Tore V Vernersson Dynamics

Rostyslav Skrypnyk Dynamics

Erika Steyn Engineering Materials

Christer Persson Engineering Materials

Björn Andersson Material and Computational Mechanics

Knut Andreas Meyer Material and Computational Mechanics

Mohammad Salahi Nezhad Material and Computational Mechanics

Jannik Theyssen Applied Acoustics

Swedish Transport Administration

European Commission (EC)

46 publications exist

2013–2018

Development of analysis models for thermomechanical fatigue

Johan Ahlström Engineering Materials

Christer Persson Engineering Materials

Swedish Energy Agency

7 publications exist

2013–2017

Thermo-mechanical fatigue of NI-based supperalloys (TMF II)

Christer Persson Materials Technology

VINNOVA

2 publications exist

2011–2013

Snabba deformationsförlopp vid maskinbearbetning och containment

Christer Persson Materials Technology

Ragnar Larsson Material and Computational Mechanics

VINNOVA

1 publication exists

2011–2013

Thermo-mechanical fatigue of NI-based supperalloys (TMF I)

Christer Persson Materials Technology

VINNOVA

There might be more projects where Christer Persson participates, but you have to be logged in as a Chalmers employee to see them.