Per-Anders Eggertsen

Visar 19 publikationer

2012

Experiences from experimental and numerical springback studies of a semi-industrial forming tool

Per-Anders Eggertsen, Kjell Mattiasson
International Journal of Material Forming. Vol. 5 (4), p. 341-359
Artikel i vetenskaplig tidskrift
2011

A comprehenisve analysis of benchmark 4: Pre-strain effect on springback of 2D draw bending

Per-Anders Eggertsen, Kjell Mattiasson, Mats Larsson
AIP Conference Proceedings. Vol. 1383, p. 1064-1071
Paper i proceeding
2011

Prediction of springback in sheet metal forming

Per-Anders Eggertsen
Doktorsavhandling
2011

A Phenomenological Model for the Hysteresis Behavior of Metal Sheets Subjected to Unloading/Reloading Cycles

Per-Anders Eggertsen, Kjell Mattiasson, J. Hertzman
Journal of Manufacturing Science and Engineering, Transactions of the ASME. Vol. 133 (6)
Artikel i vetenskaplig tidskrift
2011

On the identification of kinematic hardening material parameters for accurate springback predictions

Per-Anders Eggertsen, Kjell Mattiasson
International Journal of Material Forming. Vol. 4 (2), p. 103-120
Artikel i vetenskaplig tidskrift
2010

An efficient inverse approach for material hardening parameter identification from a three-point bending test

Per-Anders Eggertsen, Kjell Mattiasson
Engineering with Computers. Vol. 26 (2), p. 159-170
Artikel i vetenskaplig tidskrift
2010

On the modeling of the unloading modulus for metal sheets

Per-Anders Eggertsen, Kjell Mattiasson
International Journal of Material Forming. Vol. 3 (SUPPL. 1), p. 127-130
Artikel i vetenskaplig tidskrift
2010

On constitutive modeling for springback analysis

Per-Anders Eggertsen, Kjell Mattiasson
International Journal of Mechanical Sciences. Vol. 52 (6), p. 804-818
Artikel i vetenskaplig tidskrift
2010

On Springback Prediction With Special Reference To Constitutive Modeling

Per-Anders Eggertsen, Kjell Mattiasson
AIP Conference Proceedings. Vol. 1252, p. 1003-1011
Paper i proceeding
2010

On the modeling of the unloading modulus for metal sheets

Per-Anders Eggertsen, Kjell Mattiasson
Proceedings of the 13th ESAFORM conference, Brescia, Italy
Paper i proceeding
2010

Uniaxial tension/compression tests and cyclic bending tests for hardening parameter identification

Per-Anders Eggertsen, Kjell Mattiasson
Proceedings of IDDRG'10, The International Deep Drawing research Group, May 31-June 02, Graz, Austria., p. 565-574
Paper i proceeding
2009

On the constitutive modeling of cyclic plasticity and its application to springback prediction

Per-Anders Eggertsen, Kjell Mattiasson
Proceedings of the 3rd Forming Technology Forum, Zurich, Switzerland, p. 37-44
Paper i proceeding
2009

On the modelling of the bending-unbending behaviour for accurate springback predictions

Per-Anders Eggertsen, Kjell Mattiasson
International Journal of Mechanical Sciences. Vol. 51 (7), p. 547-563
Artikel i vetenskaplig tidskrift
2009

An inverse approach for material parameter identification in a cyclic bending test using LS-DYNA and LS-OPT

Per-Anders Eggertsen, Kjell Mattiasson
Proceedings of the 7th European LS-DYNA Conference, Salzburg, Austria
Paper i proceeding
2009

An efficient inverse approach for material parameter identification in a cyclic bending test

Kjell Mattiasson, Per-Anders Eggertsen
Proceedings of 3rd Forming Technology Forum, Zurich, Switzerland, p. 45-50
Paper i proceeding
2009

Material modelling for accurate springback prediction

Per-Anders Eggertsen, Kjell Mattiasson
Proceedings of the 12th ESAFORM conference, Enschede, The Netherlands
Paper i proceeding
2009

MATERIAL MODELLING FOR ACCURATE SPRINGBACK PREDICTION

Per-Anders Eggertsen, Kjell Mattiasson
International Journal of Material Forming. Vol. 2 (Suppl. 1), p. 793-796
Artikel i vetenskaplig tidskrift
2008

ON THE MODELLING OF THE BENDING-UNBENDING BEHAVIOUR AND ITS INFLUENCE ON SPRINGBACK RESULTS

Per-Anders Eggertsen, Kjell Mattiasson
Proceedings of IDDRG'08, The International Deep Drawing research Group, June 16-18, Olofström, Sweden, Edited by Nader Asnafi
Paper i proceeding

Ladda ner publikationslistor

Du kan ladda ner denna lista till din dator.

Filtrera och ladda ner publikationslista

Som inloggad användare hittar du ytterligare funktioner i MyResearch.

Du kan även exportera direkt till Zotero eller Mendeley genom webbläsarplugins. Dessa hittar du här:

Zotero Connector
Mendeley Web Importer

Tjänsten SwePub erbjuder uttag av Researchs listor i andra format, till exempel kan du få uttag av publikationer enligt Harvard och Oxford i .RIS, BibTex och RefWorks-format.

Det finns inga projekt att visa.
Det kan finnas fler projekt där Per-Anders Eggertsen medverkar, men du måste vara inloggad som anställd på Chalmers för att kunna se dem.