Influence of Spacer Thickness on the Noise Performance in InP HEMTs for Cryogenic LNAs
Artikel i vetenskaplig tidskrift, 2022

InP high electron mobility transistors (InP HEMTs) with different spacer thickness 1 to 7 nm in the InAlAs-InGaAs heterostructure have been fabricated and characterized at 5 K with respect to electrical dc and rf properties. The InP HEMT noise performance was extracted from gain and noise measurements of a hybrid low-noise amplifier (LNA) at 5 K equipped with discrete transistors. When biased for optimal noise operation, the LNA using 5 nm spacer thickness InP HEMTs achieved the lowest average noise temperature of 1.4 K at 4-8 GHz. The InP HEMT channel noise was estimated from the drain noise temperature which confirmed the minimum in noise temperature for the 5 nm spacer thickness InP HEMT. It is suggested that the spacer thickness acts to control the degree of real-space transfer of electrons from the channel to the barrier responsible for the observed noise variation in the cryogenic InP HEMTs.

low-noise amplifier

spacer thickness

Cryogenic

InP HEMT

noise

Författare

Junjie Li

Chalmers, Mikroteknologi och nanovetenskap, Terahertz- och millimetervågsteknik

Arsalan Pourkabirian

Low Noise Factory AB

Johan Bergsten

Low Noise Factory AB

Niklas Wadefalk

Low Noise Factory AB

Jan Grahn

Chalmers, Mikroteknologi och nanovetenskap, Terahertz- och millimetervågsteknik

IEEE Electron Device Letters

0741-3106 (ISSN) 15580563 (eISSN)

Vol. 43 7 1029-1032

Ämneskategorier

Annan kemiteknik

Annan fysik

Signalbehandling

DOI

10.1109/LED.2022.3178613

Mer information

Senast uppdaterat

2022-07-25