Lars-Gunnar Johansson

2023

Phosphor Thermometry of Alumina-Forming High-Temperature Alloys Using Luminescent Rare-Earth Ions in YAG: Proof of Concept Using a Dispersion of Ce³⁺ -Doped YAG Particles in a FeCrAl Alloy

2022

A Comparison of the Oxidation and Nitridation Properties of Selected Chromia- and Alumina-Forming Alloys at 800 degrees C

2022

Efficacy of an external chromia layer in reducing nitridation of high temperature alloys

2022

Influence of Yttrium Doping on the Oxidation of Mo(Si,Al)(2) in Air at 1500 degrees C

2022

Influence of Yttrium Doping on the Oxidation of Mo(Si,Al)2 in Air at 1500 °C

Localized Atmospheric Corrosion of Magnesium-Aluminum Alloys Produced by Semisolid Casting: A 2D and 3D Investigation

2021

Exploring the Effect of Silicon on the High Temperature Corrosion of Lean FeCrAl Alloys in Humid Air

2020

On the early stages of localised atmospheric corrosion of magnesium–aluminium alloys

2020

The Influence of KCl and HCl on the High-Temperature Oxidation of a Fe-2.25Cr-1Mo Steel at 400 °C

2020

Exploring failure modes of alumina scales on FeCrAl and FeNiCrAl alloys in a nitriding environment

2019

Effective Reduction of Chromium-oxy-hydroxide Evaporation from Ni-Base Alloy 690

Oxidation Driven Permeation of Iron Oxide Scales by Chloride from Experiment Guided First-Principles Modeling

Interplay of water and reactive elements in oxidation of alumina-forming alloys

2017

Fundamentals and advances in magnesium alloy corrosion

Corrosion of Magnesium-Aluminum (Mg-Al) Alloys-An Interplay Between Al Content and CO2

2017

High-Temperature Oxidation of FeCr(Ni) Alloys: The Behaviour After Breakaway

Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments

2017

Properties of Alumina/Chromia Scales in N2-Containing Low Oxygen Activity Environment Investigated by Experiment and Theory

2016

Influence of Multi-Pass Friction Stir Processing on the Corrosion Behavior of an Al-Mg-Si Alloy

In Situ Investigation of the Initial Stages of KCl-Induced Corrosion of a Chromia-Forming Steel at 450 degrees C Using an Environmental Scanning Electron Microscope

2016

Evidence for an unusual temperature dependence of the atmospheric corrosion of zinc

Technical note: A major loss in tensile strength of friction stir welded aluminum alloy joints resulting from atmospheric corrosion

2016

A new semi-solid casting technique for fabricating SiC-reinforced Mg alloys matrix composites

2016

New insights into the corrosion of magnesium alloys - The role of aluminum

On the microstructure and corrosion behavior of AZ91/SiC composites produced by rheocasting

2016

Oxidation After Breakdown of the Chromium-Rich Scale on Stainless Steels at High Temperature: Internal Oxidation

Bobbin and conventional friction stir welding of thick extruded AA6005-T6 profiles

Corrosion behaviour of friction stir-welded AA6005-T6 using a bobbin tool

The Effect of H-2 and H2O on the Oxidation of 304L-Stainless Steel at 600 A degrees C: General Behaviour (Part I)

2016

A ToF-SIMS investigation of the corrosion behavior of Mg alloy AM50 in atmospheric environments

2015

On the capability of in-situ exposure in an environmental scanning electron microscope for investigating the atmospheric corrosion of magnesium

2015

Oxidation of a Dispersion-Strengthened Powder Metallurgical FeCrAl Alloy in the Presence of O2 at 1,100°C: The Influence of Water Vapour

2015

Cyclic Corrosion and Chlorination of an FeCrAl Alloy in the Presence of KCl

Corrosion Propagation Under Paint Films on Galvanized Steel: A Comparison of Phosphating and Thin Film Corrosion Pretreatment Technologies

Corrosion behavior of alloy AM50 in semi-solid cast and high pressure die cast states in cyclic conditions

Achieving superior corrosion resistance in friction stir processed AA6005-T6 aluminum alloy joints

2015

Effect of Rheocasting on Corrosion of AM50 Mg Alloy

2015

The Oxide Scales Formed on a Dispersion-Strengthened Powder Metallurgical FeCrAl Alloy at 900 A degrees C in O-2 and in O-2 + H2O

Initial corrosion attack of 304L and T22 in 2 MW biomass gasifier: a microstructural investigation

2015

In Situ ESEM Investigation of KCl-Induced Corrosion of a FeCrAl and a Model FeNiCrAl Alloy in Lab Air at 450 degrees C

2015

Influence of temperature on the atmospheric corrosion of the Mg–Al alloy AM50

First Three-Dimensional Atomic Resolution Investigation of Thermally Grown Oxide on a FeCrAl Alloy

2015

KCl-Induced Corrosion of an FeCrAl Alloy at 600°C in O2 + H2O Environment: The Effect of Pre-oxidation

Atmospheric Corrosion of Mg Alloy AZ91D Fabricated by a Semi-Solid Casting Technique: The Influence of Microstructure

2015

KCl-Induced Corrosion of the FeCrAl Alloy Kanthal® AF at 600°C and the Effect of H2O

2015

A Microstructural and Kinetic Investigation of the KCl-Induced Corrosion of an FeCrAl Alloy at 600 A degrees C

Corrosion behaviour of zirconia based thin film pretreatments vs phosphating during short & long term cyclic exposure

2015

The Influence of SO2 on the Corrosion of Mg and Mg-Al Alloys

Oxidation of Sanicro 25 (42Fe22Cr25NiWCuNbN) in O2 and O2 + H2O Environments at 600-750°C

The Initial Oxide Scale Development on a Model FeNiCrAl Alloy at 900 degrees C in Dry and Humid Atmosphere: A Detailed Investigation

Microstructural characterization of the Mg-Al alloy AM50 produced by a newly developed rheo-casting process

NaCl-induced atmospheric corrosion of two MgAl alloys in semi-solid cast and diecast states - Influence of microstructure and CO2

Microstructural Investigation of the HCl-Induced Corrosion of the Austenitic Alloy 310S (52Fe26Cr19Ni) at 500 °C

NaCl-Induced Atmospheric Corrosion of the MgAl Alloy AM50-The Influence of CO2

Oxidation of Co- and Ce-nanocoated FeCr steels: A microstructural investigation

Evaluation of ceramic sacrificial coatings for improved alkaliinduced corrosion protection in biofuel-fired boilers

Oxidation behavior of a Mo(Si,Al)2 composite at 900–1600 C in dry air

2013

Influence of temperature on the atmospheric corrosion of the MgAl alloy AM50 produced by semi-solid cast and high pressure die cast technique

NaCl-induced atmospheric corrosion of MgAl alloy AM50 in semi-solid cast and high pressure die cast form; relation between alloy microstructure and corrosion

Oxidation of Fe-10Cr in O-2 and in O-2+H2O environment at 600 degrees C: A microstructural investigation

High Temperature Corrosion of Ni-Based Alloys SCA425+and IN792

Long term study of Cr evaporation and high temperature corrosion behaviour of Co coated ferritic steel for solid oxide fuel cell interconnects

Oxidation Behaviour of Sanicro 25 (42Fe22Cr25NiWCuNbN) in O-2/H2O Mixture at 600 degrees C

2012

Alkali Induced High Temperature Corrosion of Stainless Steel: The Influence of NaCl, KCl and CaCl2

How to screen high temperature steels for optimal use in biofuel-heated burners for residential boilers: Role of alkali

Oxidation of Binary FeCr Alloys (Fe–2.25Cr, Fe–10Cr, Fe–18Cr and Fe–25Cr) in O2 and in O2 + H2O Environment at 600 °C

2011

The Effects of KCl, K2SO4 and K2CO3 on the High Temperature Corrosion of a 304-Type Austenitic Stainless Steel

KCl-Induced High Temperature Corrosion of Austenitic Stainless Steel 304L – The Influence of SO2

An ESEM in situ investigation of initial stages of the KCl induced high temperature corrosion of a Fe-2.25Cr-1Mo steel at 400 degrees C

The influence of small amounts of KCl(s) on the high temperature corrosion of a Fe-2.25Cr-1Mo steel at 400 and 500 degrees C

Oxidation behaviour of a Mo(Si,Al)2 based composite at 1500 degrees C

Oxidation behavior of a Mo (Si, Al)(2)-based composite at 300-1000 degrees C

High Temperature Oxidation of the Austenitic (35Fe27Cr31Ni) Alloy Sanicro 28 in O-2 + H2O Environment

Oxidation behavior at 300–1000C of a (Mo,W)Si2-based composite containing boride

Sewage sludge as additive to reduce the initial fireside corrosion caused by combustion of shredder residues in a waste-fired BFB boiler.

TEM Investigation of the Microstructure of the Scale Formed on a FeCrAlRE Alloy at 900 A degrees C: The Effect of Y-rich RE Particles

Microstructural Investigation of the Initial Oxidation of the FeCrAlRE Alloy Kanthal AF in Dry and Wet O-2 at 600 and 800 degrees C

Protective performances of two anti-graffiti treatments towards sulfite and sulfate formation in SO2 polluted model environment

Investigation of Chromium Volatilization from FeCr Interconnects by a Denuder Technique

Oxidation of iron at 400-600 °C in dry and wet O2

Alumina scale formation on a powder metallurgical FeCrAl alloy (Kanthal APMT) at 900-1100°C in dry O2 and in O2 + H2O

Microstructural investigation of the initial oxidation at 1450°C and 1500°C of a Mo(Si,Al)2-based composite

Chromium evaporation of Coated and uncoated FE-22CR steels investigated by a novel denuder technique

Microstructural investigation of the KCl-induced Corrosion of the Austenitic alloy Sanicro 28 (35Fe27Cr31Ni) at 600°C

Oxidation of FeCrAl foils at 500-900 degrees C in dry O-2 and O-2 with 40% H2O

KCl-Induced Corrosion of a 304-type Austenitic Stainless Steel in O-2 and in O-2 + H2O Environment: The Influence of Temperature

An ESEM in-situ investigation of the influence of H

Cr evaporation of metallic interconnects: A novel method for quantification

Investigation of the Evolution of the Oxide Scale Formed on 310 Stainless Steel Oxidized at 600 °C in Oxygen with 40% Water Vapour Using FIB and TEM

The influence of KCl on the corrosion of an austenitic stainless steel (304L) in oxidizing humid conditions at 600 ºC: A microstructural study

Acetic Acid Vapor Corrosion of Lead-Tin Alloys Containing 3.4 and 15% Tin

Focused ion beam and electron microscopy analysis of corrosion of lead-tin alloys: Applications to conservation of organ pipes

Atmospheric corrosion of historical organ pipes: The influence of environment and materials

The influence of relative humidity and temperature on the acetic acid vapour-induced atmospheric corrosion of lead

Influence of SO2 on the oxidation of 304L steel in O-2+40%H2O at 600 degrees C

Early stages of the oxidation of a FeCrAlRE alloy (Kanthal AF) at 900 °C: A detailed microstructural investigation

Air Pollutant Concentrations and Atmospheric Corrosion of Organ Pipes in European Church Environments

The Influence of Small Amounts of KCl(s) on the Initial Stages of the Corrosion of Alloy Sanicro 28 at 600 °C

Cyclic oxidation of two FeCrAlRE foils at 1100 oC - The influence of the concentration of minor alloying elements on scale microstructure

Alkali Induced Corrosion of 304-type Austenitic Stainless Steel at 600°C; Comparison between KCl, K2CO3 and K2SO4

Fireside corrosion of stainless and low alloyed steels in a waste-fired CFB boiler; The effect of adding sulphur to the fuel

The influence of relative humidity and temperature on the acetic acid vapour-induced atmospheric corrosion of lead

The influence of H2O on iron oxidation at 600?C: a microstructural study.

Paralinear Oxidation of Chromium in O2 + H2O Environment at 600–700 °C

Properties of a bio-photovoltaic nano-device

Comment on "Corrosion of copper by water" [Electrochem. Solid-State Lett., 10, C63, (2007)

Atmospheric corrosion of lead - The influence of formic acid and acetic acid vapors

Investigation of FIB-thinned TEM cross-sections of oxide scales formed on type 310 steel at 600 C° in water vapour-containing oxygen atmospheres

The effect of water vapor on the initial stages of oxidation of the FeCrAl alloy Kanthal AF at 900 degrees C

Structural study and proton conductivity in Yb-doped BaZrO3

Initial stages of the HCl-induced high-temperature corrosion of alloy 310

Influence of H2O(g) on the Oxide Microstructure of the Stainless Steel 353MA at 900°C in Oxygen.

The effect of traces of SO2 on iron oxidation: A microstructural study

2007

Potassium, chlorine, and sulfur in ash, particles, deposits, and corrosion during wood combustion in a circulating fluidized-bed boiler

Critical corrosion phenomena on superheaters in biomass and waste-fired boilers

Inverkan av svaveltillsatser på överhettarkorrosion, emissioner och askkvalitet i en bioeldad anläggning

The influence of CO2, AlCl3.6H2O, MgCl2.6H2O, Na2SO4, and NaCl on the atmospheric corrosion of aluminium

Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600°C

Alteration of the doping state induced by thallium loss in Tl-2201

KCl-Induced High Temperature Corrosion of the Austenitic Fe-Cr-Ni Alloys 304L and Sanicro 28 at 600 °C

The influence of sulphur additions on the corrosive environment in a waste-fired CFB boiler

Corrosivity of KCl(g) at Temperatures Above its Dew Point - Initial Stages of the High Temperature Corrosion of Alloy Sanicro 28 at 600°C

Synthesis and structural characterization of perovskite type proton conducting BaZr1−xInxO3−δ (0.0 ≤ x ≤ 0.75)

Microstructural investigation of the influence of KCl on the corrosion of 304L exposed to 5% O2 + N2

Microstructural investigation of the effect of water vapour on the oxidation of alloy 353 MA in oxygen at 700 and 900ºC

Breakdown of the protective oxide on 11 % Cr steel at high temperature in the presence of water vapor and oxygen, the influence of chromium vaporization

KCl induced corrosion of a 304-type austenitic stainless steel at 600 degrees C; The role of potassium

Influence of acetic acid vapor on the atmospheric corrosion of lead

Corrosivity of KCl(g) at temperatures above its dew point - Initial stages of the high temperature corrosion of alloy Sanicro 28 at 600 degrees C

SEM investigation of reactive element particles on the surface of Kanthal AF oxidized at 900°C

TEM investigation of the base oxide formed on FeCrAl at 900°C in dry O2 and O2 with 40% H2O

The Formation of Oxide Scale on FeCrAl at 900°C in dry O2 and O2 + 40% H2O

Oxidation of FeCrAl alloys at 500-900 degrees C in dry O-2

The influence of sulphur additions on the corrosive environment in a waste-fired CFB boiler

Influence of ppb levels of SO2 on the atmospheric corrosion of aluminum in the presence of NaCl

Josephson junctions fabricated by focused ion beam from ex situ grown MgB2 thin films

Corrosion of magnesium in humid air

A pilot plant study of the effect of alkali salts on initial stages of the high temperature corrosion of alloy 304L

Effect of water-vapor-induced Cr vaporization on the oxidation of austenitic stainless steels at 700 and 900 degrees C - Influence of Cr/Fe ratio in alloy and Ce additions

Chromic acid evaporation upon exposure of Cr2O3(S) to H2O(g) and O-2(g) - mechanism from first principles

Scanning kelvin probe force microscopy - A useful tool for studying atmospheric corrosion of MgAl alloys in situ

Critical behavior of vortices in epitaxial Tl-2201 films at zero external field

Protective and nonprotective behavior of 11% Cr steel in O-2+H2O environment at 450-700 degrees C

Is KCl(g) corrosive at temperatures above its dew point? - Influence of KCl(g) on initial stages of the high temperature corrosion of 11% Cr steel at 600 degrees C

Determining the crystal symmetry of epitaxial Tl-2201 thin films by X-ray diffraction

Pressure effect in the Hg-based superconductors: A structural study