Mohammad Sattari

Forskare vid Mikrostrukturfysik

I received my PhD in materials science and engineering from Queen's University, Canada.

I work as a transmission electron microscopy (TEM) research specialist in the division of Materials Microstructure.
My research focuses on microstructural characterization of novel materials by means of advanced analytical electron microscopy techniques, trying to find the link between materials’ microstructure and their properties and behaviour in macro scale.
Since the start of my research career, I have been studying energy related materials, such as Zr alloys for nuclear power plants, ferritic steels for SOFC applications, Ni-based supperalloys for gas turbines and recently solar cells.

Källa: chalmers.se

Kontaktuppgifter ORCID

Publikationer (32)
Projekt (0)

Visar 32 publikationer

2024

Characterization of hydrogen traps in a co-precipitation steel investigated by atom probe experiments without cryogenic transfer

Severin Jakob, Mohammad Sattari, Birhan Sefer et al

Scripta Materialia. Vol. 243

Artikel i vetenskaplig tidskrift

Visa projekt

2023

Performance and evolution of cold spray Cr-coated optimized ZIRLO™ claddings under simulated loss-of-coolant accident conditions

Andrea Fazi, Mohammad Sattari, Marta Krystyna Stiller et al

Journal of Nuclear Materials. Vol. 576

Artikel i vetenskaplig tidskrift

Visa projekt

2023

Intergranular oxidation of additively manufactured Ni-base alloy 625: The role of Si

Anton Chyrkin, W. J. Nowak, Kerem Gündüz et al

Corrosion Science. Vol. 219

Artikel i vetenskaplig tidskrift

Visa projekt

2023

CrN–NbN nanolayered coatings for enhanced accident tolerant fuels in BWR

Andrea Fazi, Mohammad Sattari, Michal Strach et al

Journal of Nuclear Materials. Vol. 586

Artikel i vetenskaplig tidskrift

Visa projekt

2023

The influence of oxygen partial pressure on the base oxide of chromia forming steels: The story prior to breakaway oxidation

Mohammad Sattari, Hamed Hoseini Hooshyar, Jesper Liske et al

Corrosion Science. Vol. 213

Artikel i vetenskaplig tidskrift

2022

High-temperature oxidation behavior of additively manufactured IN625: Effect of microstructure and grain size

Anton Chyrkin, Kerem Gündüz, Irina Fedorova et al

Corrosion Science. Vol. 205

Artikel i vetenskaplig tidskrift

2022

Efficacy of an external chromia layer in reducing nitridation of high temperature alloys

Tommy Sand, S. Bigdeli, Mohammad Sattari et al

Corrosion Science. Vol. 197

Artikel i vetenskaplig tidskrift

2021

On oxide formation on a single crystalline Ni-based superalloy at 900 °C in SO2 containing atmosphere: The effect of surface treatment

Katrin Jahns, Haiping Lai, Ulrich Krupp et al

Corrosion Science. Vol. 180

Artikel i vetenskaplig tidskrift

2021

Should the oxygen source be considered in the initiation of KCl-induced high-temperature corrosion?

Juho Lehmusto, Mohammad Sattari, Mats Halvarsson et al

Corrosion Science. Vol. 183

Artikel i vetenskaplig tidskrift

2021

Characterization of as-deposited cold sprayed Cr-coating on Optimized ZIRLO™ claddings

Andrea Fazi, Hisham Aboulfadl, Anand Harihara Subramonia Iyer et al

Journal of Nuclear Materials. Vol. 549

Artikel i vetenskaplig tidskrift

Visa projekt

2021

The effect of additive manufacturing on the initial High temperature oxidation properties of RE-containing FeCrAl alloys

Kerem Gündüz, Alberto Visibile, Mohammad Sattari et al

Corrosion Science. Vol. 188

Artikel i vetenskaplig tidskrift

2020

Effects of TiO2-Coated Stainless Steel Orthodontic Wires on Streptococcus mutans Bacteria: A Clinical Study

Vahid Mollabashi, Abbas Farmany, Mohammad Yousef Alikhani et al

International journal of nanomedicine. Vol. 15, p. 8759-8766

Artikel i vetenskaplig tidskrift

2020

Microscopic investigation of layer growth during olivine bed material aging during indirect gasification of biomass

Robin Faust, Mohammad Sattari, Jelena Maric et al

Fuel. Vol. 266

Artikel i vetenskaplig tidskrift

2020

Effects of gas flow on detailed microstructure inhomogeneities in LPCVD TiAlN nanolamella coatings

Ren Qiu, Axel Forslund, Olof Bäcke et al

Materialia. Vol. 9

Artikel i vetenskaplig tidskrift

Visa projekt

2020

Oxidation of Fe-2.25Cr-1Mo in presence of KCl(s) at 400 °C – Crack formation and its influence on oxidation kinetics

Amanda Persdotter, Mohammad Sattari, Erik Larsson et al

Corrosion Science. Vol. 163

Artikel i vetenskaplig tidskrift

2019

The Influence of Oxide-Scale Microstructure on KCl(s)-Induced Corrosion of Low-Alloyed Steel at 400 °C

Mercedes Andrea Olivas Ogaz, Johan Eklund, Amanda Persdotter et al

Oxidation of Metals. Vol. 91 (3-4), p. 291-310

Artikel i vetenskaplig tidskrift

2019

Influence of KCl and HCl on a laser clad FeCrAl alloy: In-Situ SEM and controlled environment High temperature corrosion

L. Reddy, Mohammad Sattari, C. J. Davis et al

Corrosion Science. Vol. 158

Artikel i vetenskaplig tidskrift

2018

Interplay of water and reactive elements in oxidation of alumina-forming alloys

Nooshin Mortazavi Seyedeh, Christine Geers, Mohsen Esmaily et al

Nature Materials. Vol. 17 (7), p. 610-617

Artikel i vetenskaplig tidskrift

2018

Determination of the oxide scale growth mechanism using 18O-tracer experiments in combination with Transmission Electron Microscopy and nanoscale Secondary Ion Mass Spectrometry

Hannes Falk Windisch, Per Malmberg, Mohammad Sattari et al

Materials Characterization. Vol. 136, p. 128-133

Artikel i vetenskaplig tidskrift

2018

Temperature dependence of corrosion of ferritic stainless steel in dual atmosphere at 600–800 °C

Patrik Alnegren, Mohammad Sattari, Jan-Erik Svensson et al

Journal of Power Sources. Vol. 392, p. 129-138

Artikel i vetenskaplig tidskrift

2017

Co- and Ce/Co-coated ferritic stainless steel as interconnect material for Intermediate Temperature Solid Oxide Fuel Cells

Hannes Falk Windisch, Julien Claquesin, Mohammad Sattari et al

Journal of Power Sources. Vol. 343, p. 1-10

Artikel i vetenskaplig tidskrift

2017

High-Temperature Oxidation of FeCr(Ni) Alloys: The Behaviour After Breakaway

Torbjörn Jonsson, H. Larsson, Sofia Karlsson et al

Oxidation of Metals. Vol. 87 (3-4), p. 333-341

Artikel i vetenskaplig tidskrift

2016

Severe dual atmosphere effect at 600 °C for stainless steel 441

Patrik Alnegren, Mohammad Sattari, Jan-Erik Svensson et al

Journal of Power Sources. Vol. 301, p. 170-178

Artikel i vetenskaplig tidskrift

2016

Oxidation After Breakdown of the Chromium-Rich Scale on Stainless Steels at High Temperature: Internal Oxidation

Torbjörn Jonsson, Sofia Karlsson, Hamed Hoseini Hooshyar et al

Oxidation of Metals. Vol. 85 (5-6), p. 509-536

Artikel i vetenskaplig tidskrift

2016

The Oxidation of Coated SOFC Interconnects in Fuel Side Environments

Rakshith Nugehalli Sachitanand, Mohammad Sattari, Jan-Erik Svensson et al

Fuel Cells. Vol. 16 (1), p. 32-38

Artikel i vetenskaplig tidskrift

2016

Degradation of ferritic stainless steels under conditions used for solid oxide fuel cells and electrolyzers at varying oxygen pressures

Patrik Alnegren, Mohammad Sattari, Jan Froitzheim et al

Corrosion Science. Vol. 110, p. 200-212

Artikel i vetenskaplig tidskrift

2015

Chromium vaporization from mechanically deformed pre-coated interconnects in Solid Oxide Fuel Cells

Hannes Falk Windisch, Mohammad Sattari, Jan-Erik Svensson et al

Journal of Power Sources. Vol. 297, p. 217-223

Artikel i vetenskaplig tidskrift

2015

Coatings for SOFC interconnects in fuel side environments

Rakshith Nugehalli Sachitanand, Mohammad Sattari, Jan-Erik Svensson et al

ECS Transactions. Vol. 68 (1), p. 1575-1580

Paper i proceeding

2015

The effect of Ce on the high temperature oxidation properties of a Fe-22% Cr steel: microstructural investigation and EELS analysis

Mohammad Sattari, Rakshith Nugehalli Sachitanand, Jan Froitzheim et al

Materials at High Temperatures. Vol. 32 (1-2), p. 118-122

Artikel i vetenskaplig tidskrift

2014

Inhibiting chromium evaporation and oxide scale growth on SOFC metallic interconnects by nano coatings

Patrik Alnegren, Rakshith Nugehalli Sachitanand, Jan Gustav Grolig et al

20th World Hydrogen Energy Conference, WHEC 2014. Vol. 1 (2014)

Paper i proceeding

2013

Evaluation of the oxidation and Cr evaporation properties of selected FeCr alloys used as SOFC interconnects

Rakshith Nugehalli Sachitanand, Mohammad Sattari, Jan-Erik Svensson et al

International Journal of Hydrogen Energy. Vol. 38 (35), p. 15328-15334

Artikel i vetenskaplig tidskrift

2009

Characterization of Adhesion Strength of HVOF Sprayed IN718 Coatings

Christophe Lyphout, Per Nylén, Uta Klement et al

Proceedings of the 22nd International Conference on Surface Modification Technologies (SMT22), Trollhättan, Sweden, p. 11-18

Paper i proceeding

Ladda ner publikationslistor

Du kan ladda ner denna lista till din dator.

Filtrera och ladda ner publikationslista

Som inloggad användare hittar du ytterligare funktioner i MyResearch.

Du kan även exportera direkt till Zotero eller Mendeley genom webbläsarplugins. Dessa hittar du här:

Zotero Connector
Mendeley Web Importer

Tjänsten SwePub erbjuder uttag av Researchs listor i andra format, till exempel kan du få uttag av publikationer enligt Harvard och Oxford i .RIS, BibTex och RefWorks-format.

Det finns inga projekt att visa.

Det kan finnas fler projekt där Mohammad Sattari medverkar, men du måste vara inloggad som anställd på Chalmers för att kunna se dem.