Bengt-Göran Rosen

Visar 45 publikationer

2014

Surface design methodology-challenge the steel

M. Bergman, Bengt-Göran Rosen, L.G.T. Eriksson et al
Journal of Physics: Conference Series. Vol. 483 (1), p. Art. no. 012013-
Paper i proceeding
2014

The Stedman diagram revisited

S Rosén, T. R. Thomas, Bengt-Göran Rosen
Surface Topography: Metrology and Properties. Vol. 2 (1)
Artikel i vetenskaplig tidskrift
2014

Topographic modelling of haptic properties of tissue products

Bengt-Göran Rosen, A. Fall, S Rosén et al
Journal of Physics: Conference Series. Vol. 483 (1)
Paper i proceeding
2011

Characterisation of Worn Cylinder Liner Surfaces by Segmentation of Honing and Wear Scratches

Zlate Dimkovski, Cecilia Anderberg, Robert Ohlsson et al
Wear
Artikel i vetenskaplig tidskrift
2011

A Method for Visualization of Surface Texture Anisotropy in Different Scales of Observation

Johan C Berglund, Daniel Wiklund, Bengt-Göran Rosen
Scanning. Vol. 33 (5), p. 325-331
Artikel i vetenskaplig tidskrift
2011

On finishing of pressing die surfaces using machine hammer peening

Johan C Berglund, Magnus Liljengren, Bengt-Göran Rosen
International Journal of Advanced Manufacturing Technology. Vol. 52 (1-4), p. 115-121
Artikel i vetenskaplig tidskrift
2011

Influence of Different Cylinder Liner Surfaces on Their Performance with the Twin Land Oil Control Ring in a Car Engine

Zlate Dimkovski, Cecilia Anderberg, Frederic Cabanettes et al
Proceedings of the 13th International Conference on Metrology and Properties of Engineering Surfaces
Paper i proceeding
2011

Uncertainties and optimized sampling in surface roughness characterization

Bengt-Göran Rosen, J. Garnier
Wear. Vol. 271 (3-4), p. 610-615
Paper i proceeding
2011

Interference Measurements of Deposits on Cylinder Liner Surfaces

Zlate Dimkovski, Lars Bååth, Stefan Rosen et al
Wear. Vol. 270 (3-4), p. 247-251
Artikel i vetenskaplig tidskrift
2011

Optimisation of Cylinder Liner Surface Finish by Slide Honing

Zlate Dimkovski, Frederic Cabanettes, Hans Löfgren et al
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Artikel i vetenskaplig tidskrift
2011

Traceology, quantifying finishing machining and function: A tool and wear mark characterisation study

T. R. Thomas, Bengt-Göran Rosen, H. Zahouani et al
Wear. Vol. 271 (3-4), p. 553-558
Paper i proceeding
2010

Friction in Sheet Metal Forming - A Comparison Between Milled and Manually Polished Die Surfaces

Daniel Wiklund, Magnus Liljengren, Johan C Berglund et al
Proceedings of 4th International Conference on Tribology in Manufacturing Processes, p. 613-622
Paper i proceeding
2010

Surface topography on trimming dies and the influence of wear

Per Jonsson, Johan C Berglund, Kenneth Kjellsson et al
Proceedings of IDDRG 2010 International Conference, p. 345-354
Paper i proceeding
2010

Milled die steel surface roughness correlation with steel sheet friction

Johan C Berglund, C A Brown, Bengt-Göran Rosen et al
CIRP Annals - Manufacturing Technology. Vol. 59 (1), p. 577-580
Paper i proceeding
2010

On discovering relevant scales in surface roughness measurement - an evaluation of a band-pass method

Johan C Berglund, C Agunwamba, B Powers et al
Scanning. Vol. 32 (4), p. 244-249
Artikel i vetenskaplig tidskrift
2009

Machine Hammer Peening – A Substitute for Polishing of Pressing Die Surfaces?

Johan C Berglund, Magnus Liljengren, Bengt-Göran Rosen
Proceedings of the International 3'rd Swedish Production Symposium (Day 1), p. 184-189
Paper i proceeding
2009

A friction model evaluated with results from a bending-under-tension test

Daniel Wiklund, Bengt-Göran Rosen, A. Wihlborg
Tribology International. Vol. 42 (10), p. 1448-1452
Artikel i vetenskaplig tidskrift
2009

Quantification of the cold worked material inside the deep honing grooves on cylider liner surfaces and its effect on wear

Zlate Dimkovski, Cecilia Anderberg, Bengt-Göran Rosen et al
Wear. Vol. 267 (12), p. 2235-2242
Artikel i vetenskaplig tidskrift
2009

Surfaces generated by abrasive finishing processes as self-affine fractals

Tom Thomas, Bengt-Göran Rosen
International Journal of Surface Science and Engineering. Vol. 3 (4), p. 275-285
Artikel i vetenskaplig tidskrift
2009

A Method Development for Correlation of Surface Finish Appearance of Die Surfaces and Roughness Measurement Data

Johan C Berglund, Bengt-Göran Rosen
Tribology Letters. Vol. 36 (2), p. 157-164
Artikel i vetenskaplig tidskrift
2008

Robust and Easy to Use Quality Control of Roughness on Milled Tool Steel Surfaces

Johan C Berglund, Bengt-Göran Rosen
Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing, p. 284-289
Paper i proceeding
2008

Evaluation of cam and roller surfaces and their manufacturing process by functional characterisation

Frederic Cabanettes, Johan Mohlin, Per Henrik Nilsson et al
Proceedings of the Swedish Production Symposium 2008, Stockholm, Sweden, p. 7-
Paper i proceeding
2008

Measuring strategies for smooth tool steel surfaces

Johan C Berglund, Per Jonsson, Sabina Rebeggiani et al
Proceedings of the XII. International Colloquium on Surfaces, p. 110-119
Paper i proceeding
2008

Complementing 3D Roughness Parameters for Monitoring of Improved Honing of Cylinder Bores

Zlate Dimkovski, Cecilia Anderberg, Robert Ohlsson et al
Proceedings of the 2nd Swedish Production Symposium
Paper i proceeding
2008

Tribological aspect of the surface topography variations for injection cams

Frederic Cabanettes, Johan Mohlin, Per Henrik Nilsson et al
Proceedings of Nordtrib conference 2008, Tampere, Finland, p. 16-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2008

Frictional mechanisms in mixed lubricated regime in steel sheet metal forming

Daniel Wiklund, Bengt-Göran Rosen, Lina-Maria Gunnarsson
Wear. Vol. 264 (5-6), p. 474-479
Artikel i vetenskaplig tidskrift
2008

Surface Finish and Roughness Measurement in Die and Mould Manufacturing

Johan C Berglund, Bengt-Göran Rosen
Proceedings of the 2'nd Swedish Production Symposium, p. 385-391
Paper i proceeding
2008

Towards 3D Charactersation of Cylinder Liner Surfaces

Zlate Dimkovski, Cecilia Anderberg, Fredrik Strömstedt et al
Proceedings of the XII international colloquium on surfaces
Paper i proceeding
2008

Quantification of Blechmantel Effect on Wear of Cylinder Bore Microtopography

Zlate Dimkovski, Cecilia Anderberg, Bengt-Göran Rosen et al
Proceedings of the 13th nordic symposium in tribology
Paper i proceeding
2008

Evaluation of cam and roller surfaces by wear testing and functional characterisation

Frederic Cabanettes, Johan Mohlin, Per Henrik Nilsson et al
Proceedings of the 35th Leeds Lyon Symposium on Tribology, p. 8-
Paper i proceeding
2008

The evolution of surface topography of injection cams

Frederic Cabanettes, Julien Claret-Tournier, Johan Mohlin et al
Wear, p. 4-
Artikel i vetenskaplig tidskrift
2007

Cylinder Liner Honed Surface Optimisation - a Manufacture-Characterisation-Function Study

Zlate Dimkovski, Nicolas Allard, Cecilia Anderberg et al
Proceedings of the 1st Swedish production symposium
Paper i proceeding
2007

The influence of surface roughness and the contact pressure distribution on friction in rolling/sliding contacts

Li Xiao, S. Bjorklund, Bengt-Göran Rosen
Tribology International. Vol. 40 (4), p. 694-698
Artikel i vetenskaplig tidskrift
2007

The evolution of surface topography of injection cams

Frederic Cabanettes, Julien Claret-Tournier, Johan Mohlin et al
Proceedings of Mets and Props conference 2007´, Huddersfield, UK, p. 5-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2006

On the Implementation and Evaluation of a Roughness Based Friction Model in FE simulations of Sheet Metal Forming

Daniel Wiklund, Larsgunnar Nilsson, Bertil Nilsson et al
Proceedings of The 12th Nordic Symposium on Tribology, Helsingör, Denmark, 7-9 June 2006
Paper i proceeding
2006

Cylinder liners and consequences of improved honing

Cecilia Anderberg, Frederic Cabanettes, Zlate Dimkovski et al
Proceedings of Nordtrib conference 2006, Helsingor, Danemark, p. 13-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2006

The Cylinder Liners and Consequences of Improved Honing

Cecilia Anderberg, Frederic Cabanettes, Zlate Dimkovski et al
Proceedings of the 12th nordic symposium in tribology
Paper i proceeding
2005

Frictional Mechanisms in Mixed Lubricated Regime in Steel Sheet Metal Forming

Daniel Wiklund, Bengt-Göran Rosen, Lars Gunnarsson
10th International Conference on Metrology and Properties of Engineering Surfaces, Saint-Étienne, France, 4-7 July 2005
Paper i proceeding
2004

Topographical characterisation of artificial femoral heads- a Benchmarking study

Bengt-Göran Rosen, Ann Wennerberg, Stefan Rosén
Wear. Vol. 257 (12), p. 1275-1280
Artikel i vetenskaplig tidskrift
2004

Evaluation of surface topography parameters for friction prediction in stamping

Daniel Wiklund, A. Wihlborg, Bengt-Göran Rosen
Wear. Vol. 257 (12), p. 1296-1300
Artikel i vetenskaplig tidskrift
2002

A Comparative Surface Topography Study of FEM Simulation and Surface Indentation Tests (SIT) on Friction Prediction in Steel Sheet Forming

Daniel Wiklund, Anders Wihlborg, Bengt-Göran Rosen
Proceedings of The 10th Nordic Symposium on Tribology, Stockholm, Sweden, 9-12 June 2002
Paper i proceeding
2001

The Influence of Lubricants Kinematic Viscosity and Steel Sheet Surface-Topography in a Bending Under Tension Friction Test

Anders Wihlborg, Daniel Wiklund, Bengt-Göran Rosen
Proceedings of The 2nd World Tribology Congress, Vienna, Austria, 3-7 September 2001
Paper i proceeding
2001

Surface Indentation Test (SIT) for Friction Prediction in Mixed Lubrication of Coated Sheets

Anders Wihlborg, Daniel Wiklund, Bengt-Göran Rosen
Proceedings of The 28th Leeds-Lyon Symposium on Tribology, Vienna, Austria, 3-7 September 2001
Paper i proceeding
1994

Towards Surface Engineering

Bengt-Göran Rosen
Doktorsavhandling

Spara referenser

Om du har installerat Zotero eller Mendeley på din dator kan du direkt ta ut referenser från de publikationer du ser i listan.

Du laddar ner dessa pluginer här:
Zotero
Mendeley

Det finns inga projekt att visa.
Det kan finnas fler projekt där Bengt-Göran Rosen medverkar, men du måste vara inloggad som anställd på Chalmers för att kunna se dem.