Britt-Marie Steenari

2021

Comparative Study: Impacts of Ca and Mg Salts on Iron Oxygen Carriers in Chemical Looping Combustion of Biomass

2021

Investigation of biomass alkali release in a dual circulating fluidized bed chemical looping combustion system

2021

Comparison of the effects of incineration, vacuum pyrolysis and dynamic pyrolysis on the composition of NMC-lithium battery cathode-material production scraps and separation of the current collector

Incineration of EV Lithium-ion batteries as a pretreatment for recycling – Determination of the potential formation of hazardous by-products and effects on metal compounds

Screening of untreated municipal solid waste incineration fly ash for use in cement-based materials: chemical and physical properties

Comprehensive treatments of tungsten slags in China: A critical review

2020

Strategies for sustainable and circular management of phosphorus in the baltic sea region: The holistic approach of the inPhos project

Major challenges and opportunities in silicon solar module recycling

2020

Identification and Quantification of Chemical Forms of Cu and Zn in MSWI Ashes Using XANES

Temperature effect on the distribution of lanthanides(III) in the perchlorate-malonamide-methyl isobutyl ketone systems

Synthesis and properties of SrFe12O19 obtained by solid waste recycling of oily cold rolling mill sludge

Characterisation of silicon, zirconium and aluminium coated titanium dioxide pigments recovered from paint waste

Characterization of paint formulated using secondary TiO2 pigments recovered from waste paint

Chemical Transformations in Li-Ion Battery Electrode Materials by Carbothermic Reduction

Controlling the composition and magnetic properties of nano-SrFe_12 O_19 powder synthesized from oily cold mill sludge by the citrate precursor method

Highly efficient recovery and clean-up of four heavy metals from MSWI fly ash by integrating leaching, selective extraction and adsorption

Recovery of industrial valuable metals from household battery waste

Surface properties of recycled titanium oxide recovered from paint waste

Recovery of phosphorous from industrial waste water by oxidation and precipitation

2018

Leaching and recovery of rare-earth elements from neodymium magnet waste using organic acids

Source analysis of municipal solid waste in a mega-city (Guangzhou): Challenges or opportunities?

Investigation of the kinetics and the morphology of cementation products formed during purification of a synthetic zinc sulfate electrolyte

Assessment of copper and zinc recovery from MSWI fly ash in Guangzhou based on a hydrometallurgical process

2018

Recovery of Antimony: A Laboratory Study on the Thermal Decomposition and Carbothermal Reduction of Sb(III), Bi(III), Zn(II) Oxides, and Antimony Compounds from Metal Oxide Varistors

Role of K and Ca for catalytic activation of bed material during biomass gasification

Comparative study of the application of traditional and novel extractants for the separation of metals from MSWI fly ash leachates

Investigation of the effects of thermal treatment on the leachability of Zn and Mn from discarded alkaline and Zn-C batteries

Analysis of the metal content of small-size Waste Electric and Electronic Equipment (WEEE) printed circuit-boards part 1: Internet routers, mobile phones and smartphones

Coordination of Trivalent Lanthanides with Bismalonamide Ligands: Implications for Liquid-Liquid Extraction

Mixer-settler system for the recovery of copper and zinc from MSWI fly ash leachates: An evaluation of a hydrometallurgical process

Investigation of zinc recovery by hydrogen reduction assisted pyrolysis of alkaline and zinc-carbon battery waste

2017

Separation of Heavy Rare-Earth Elements from Light Rare-Earth Elements Via Solvent Extraction from a Neodymium Magnet Leachate and the Effects of Diluents

Hydrometallurgical processes for recovery of valuable and critical metals from spent car NiMH batteries optimized in a pilot plant scale

2017

Characterization and Leaching of Neodymium Magnet Waste and Solvent Extraction of the Rare-Earth Elements Using TODGA

Crystal structure and identification of resonance forms of diethyl 2-(3-oxoiso-1,3-dihydrobenzo-furan-1-ylidene)malonate

2017

Recycling Zinc from Metal Oxide Varistors Through Leaching and Cementation of Cobalt and Nickel

Investigations into high temperature separation of antimony from metal oxide varistors

2017

REE Recovery from End-of-Life NdFeB Permanent Magnet Scrap: A Critical Review

Experimental evaluation of interactions between K, Ca, and P and Mn/Si-based oxygen carriers

Recovery of indium and yttrium from Flat Panel Display waste using solvent extraction

The solvent extraction of rare earth elements from nitrate media with novel polyamides containing malonamide groups

Production of zinc and manganese oxide particles by pyrolysis of alkaline and Zn–C battery waste

Effects of gas flow rate on zinc recovery rate and particle properties by pyrolysis of alkaline and zinc-carbon battery waste

Phycoremediation of heavy metals

Leaching optimization of municipal solid waste incineration ash for resource recovery: A case study of Cu, Zn, Pb and Cd

Solvent extraction separation of copper and zinc from MSWI fly ash leachates

Evaluation of High-Temperature Chlorination as a Process for Separation of Copper, Indium and Gallium from CIGS Solar Cell Waste Materials

Investigations into Recycling Zinc from Used Metal Oxide Varistors via pH Selective Leaching: Characterization, Leaching, and Residue Analysis

Investigation of an electrochemical method for separation of copper, indium, and gallium from pretreated cigs solar cell waste materials

Recycling of CIGS Solar Cell Waste Materials: Separation of Copper, Indium, and Gallium by High-Temperature Chlorination Reaction with Ammonium Chloride

Recovery of titanium dioxide and other pigments from waste paint by pyrolysis

Resource recovery from municipal solid waste ash

Resource recovery from municipal solid waste ash

Hydrometallurgical technology for recovery of metals from spent car NiMH batteries

Use of natural ores and waste materials as oxygen carriers for chemical-looping combustion

2014

Leaching for recovery of copper from municipal solid waste incineration fly ash: Influence of ash properties and metal speciation.

2014

Effect of bed materials mixing on the observed bed sintering

Two Strategies to Reduce Gaseous KCl and Chlorine in Deposits during Biomass Combustion - Injection of Ammonium Sulphate and Co-Combustion with Peat

2013

Speciation of Copper in Ash from a Fluidized-Bed Boiler Fired with Municipal Solid Waste

2013

Composition of agglomerates in fluidized bed reactors for thermochemical conversion of biomass and waste fuels Experimental data in comparison with predictions by a thermodynamic equilibrium model

The Effect of Bituminous and Lignite Ash on the Performance of Ilmenite as Oxygen Carrier in Chemical‐Looping Combustion

Study of Bed Material Agglomeration in A Horizontal Circulating Fluidized Bed Boiler Burning Rice Husk

2012

Initial studies of the recovery of Cu from MSWI fly ash leachates using solvent extraction

Possibilities of Ash Speciation with Synchrotron Based X-ray Absorption Spectroscopy (XAS)

Potential metal resources in waste incineration ash deposits

2011

Agglomeration of the Bed Material in Fluidized Bed Reactors for Thermal Conversion of Biomass - A Threat for the Development of the Technology

Addition of kaolin as potassium sorbent in the combustion of wood fuel - Effects on fly ash properties

Element associations in ash from waste combustion in fluidized bed

The Influence of Particle Size and Structure in Hydrated Lime on the Properties of the Lime Putty and Lime Mortar

Vattentvätt av flygaska från avfallsförbränning

Removal of hazardous metals from MSW fly ash-An evaluation of ash leaching methods

2010

What is required for the viability of metal recovery from municipal solid-waste incineration fly ash? - Design and assessment of a process plant for copper extraction

Utilization of fly ash from combustion of waste-paper sludge in the removal of divalent metal ions from contaminated waters

2009

The impact of zeolites during co-combustion of municipal sewage sludge with alkali and chlorine rich fuels

Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques

Solid fuels in chemical-looping combustion using oxide scale and unprocessed iron ore as oxygen carriers

Investigation of Ash Sintering during Combustion of Agricultural Residues and the Effect of Additives

2009

Chemical fractionation for the characterisation of fly ashes from co-combustion of biofuels using different methods for alkali reduction

Fly Ash Utilization for the Development of Low NO sub(x Bed Materials

Evaluating two test methods used for characterizing leaching properties

Application of chemical fractionation methods for characterisation of biofuels, waste derived fuels and CFB co-combustion fly ashes

Leaching of ashes from co-combustion of sewage sludge and wood—Part I: Recovery of phosphorus

2008

Countermeasures against alkali-related problems during combustion of biomass in a circulating fluidized bed boiler

Leaching of ashes from co-combustion of sewage sludge and wood-Part II: The mobility of metals during phosphorus extraction

DR-FTIR method for the study of early hydration of cement

ALTERNATIVE MATERIALS FOR ADSORPTION OF HEAVY METALS AND PETROLEUM HYDROCARBONS FROM CONTAMINATED LEACHATES

Addition of kaolin as a potassium sorbent in the combustion of wood fuel- effects on leaching of metals from the resulting fly ash

Kaolin Addition during Biomass Combustion in a 35 MW

Treatment process for MSW combustion fly ash, laboratory and pilot plant experiments

Assessment of metal mobility in MSW incineration ashes using water as the reagent

Ramprogram – Åtgärder för samtidig minimering av alkalirelaterade driftproblem, Etapp 2

Determination of the cd-bearing phases in municipal solid waste and Biomass single fly ash particles using SR-mu XRF Spectroscopy

Adsorption of Cd, Cu, Ni, Pb, and Zn on Sphagnum peat from solutions with low concentrations

Adsorption materials for removal of heavy metals and petroleum hydrocarbons from contaminated leachates

Inverkan av svaveltillsatser på överhettarkorrosion, emissioner och askkvalitet i en bioeldad anläggning

Speciation of Cu compounds in ashes from MSW incineration

A kinetic study of gaseous alkali capture by kaolin in the fixed bed reactor equipped with an alkali detector

2005

Leaching of phosphorous from ashes of co-combustion of sewage sludge and wood

A kinetic study of gaseous alkali capture by kaolin in the fixed bed reactor equipped with an alkali detector

Capture of Potassium and Cadmium by Kaolin in Oxidizing and Reducing Atmospheres

On the application of surface ionization detector for the study of alkali capture by kaolin in a fixed bed reactor

A novel particle trap impactor for use with the gas-quenching probe sampling system

X-ray fluorescence tomography of individual municipal solid waste and biomass fly ash particles

Release of salts from municipal solid waste combustion residues

Drying of granulated woos ash by flue gas from saw dust and natural gas combustion

X-ray Fluorescence Tomography of Individual Waste Fly Ash Particles

Direct determination of cadmium speciation in municipal solid waste fly ashes by synchrotron radiation induced is-X-ray fluorescence and µ-X-ray absorption spectroscopy

Cd speciation in biomass fly ash particles after size separation by centrifugal SPLITT

Gas quenching probe and field measurements of gaseous cadmium in a 12-MWth circulating fluidised bed boiler

A study of Cr(VI) in ashes from fluidized bed combustion of municipal solid waste: Leaching, secondary reactions and the applicability of some speciation methods

The Effect of Calcination on the Reactions of Ammonia over Different Carbonates and Limestones in Fluidized Bed Combustion Conditions

Synchrotron radiation induced µ-X-ray fluorescence spectroscopy on municipal solid waste fly ashes

Reaction between limestone and SO2 under conditions alternating between oxidizing and reducing. The effect of the SO2 concentration

Influence of periodically changing CO2 partial pressure on sulfur capture and free lime content of residues in PFBC

Reaction between limestone and SO2 under conditions alternating between oxidizing and reducing. The effect of short cycle times

Fly ash characteristics in co-combustion of wood with coal, oil or peat

Evaluation of the leaching characteristics of wood ash and the influence of ash agglomeration

Chemical and leaching characteristics of ash from combustion of coal, peat and wood in a 12 MWth CFB – a comparative study

Chemical Properties of FBC Ashes

Long term leaching of stabilised wood ash

Ash Sintering and Deposit Formation in PFBC

High Temperature Reactions of Straw Ash and the Antisintering Additives Kaolin and Dolomite

THermogravimetric combined with mass spectrometric studies on the oxidation of calcium suphide

Stabilisation of wood ash for recycling to forest soil

Characterization of Ashes from Wood and Straw

Decomposition of NH3 over limestone sorbents and sand materials used in a fluidised bed boiler

Calcium sulphide formation in fluidized bed boilers