Nooshin Mortazavi Seyedeh

Forskare vid Chalmers, Fysik, Materialens mikrostruktur

Visar 31 publikationer

2018

Interplay of water and reactive elements in oxidation of alumina-forming alloys

Nooshin Mortazavi Seyedeh, Christine Geers, Mohsen Esmaily et al
Nature Materials. Vol. 17, p. 610-617
Artikel i vetenskaplig tidskrift
2017

Validating material modelling for OFHC copper using Dynamic Tensile Extrusion (DTE) test at different velocity impact

Nicola Bonora, Gabriel Testa, Andrew Ruggiero et al
AIP Conference Proceedings. Vol. 1793, p. 100019-
Paper i proceeding
2017

Modelling and simulation of dynamic recrystallization (DRX) in OFHC copper at very high strain rates

Gabriel Testa, Nicola Bonora, Andrew Ruggiero et al
AIP Conference Proceedings, p. Article number 100034-
Paper i proceeding
2017

Properties of Alumina/Chromia Scales in N2-Containing Low Oxygen Activity Environment Investigated by Experiment and Theory

Christine Geers, Vedad Babic, Nooshin Mortazavi Seyedeh et al
Oxidation of Metals. Vol. 87 (3-4), p. 321-332
Artikel i vetenskaplig tidskrift
2016

Influence of Multi-Pass Friction Stir Processing on the Corrosion Behavior of an Al-Mg-Si Alloy

Mohsen Esmaily, Nooshin Mortazavi Seyedeh, W. Osikowicz et al
Journal of the Electrochemical Society. Vol. 163 (3), p. C124-C130
Artikel i vetenskaplig tidskrift
2016

In Situ Investigation of the Initial Stages of KCl-Induced Corrosion of a Chromia-Forming Steel at 450 degrees C Using an Environmental Scanning Electron Microscope

Nooshin Mortazavi Seyedeh, Luciana Intiso, Niklas Israelsson et al
Corrosion. Vol. 72 (1), p. 23-32
Artikel i vetenskaplig tidskrift
2016

Dynamic Recrystallization During High-Strain-Rate Tension of Copper

Nooshin Mortazavi Seyedeh, Nicola Bonora, Andrew Ruggiero et al
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Vol. 47A (6), p. 2555-2559
Artikel i vetenskaplig tidskrift
2016

A new semi-solid casting technique for fabricating SiC-reinforced Mg alloys matrix composites

Mohsen Esmaily, Nooshin Mortazavi Seyedeh, Jan-Erik Svensson et al
Composites Part B: Engineering. Vol. 94, p. 176-189
Artikel i vetenskaplig tidskrift
2016

Evidence for an unusual temperature dependence of the atmospheric corrosion of zinc

Mohsen Esmaily, Nooshin Mortazavi Seyedeh, Jan-Erik Svensson et al
Journal of the Electrochemical Society. Vol. 163 (14), p. C864-C872
Artikel i vetenskaplig tidskrift
2016

Bobbin and conventional friction stir welding of thick extruded AA6005-T6 profiles

Mohsen Esmaily, Nooshin Mortazavi Seyedeh, W. Osikowicz et al
Materials and Design. Vol. 108, p. 114-125
Artikel i vetenskaplig tidskrift
2016

On the microstructure and corrosion behavior of AZ91/SiC composites produced by rheocasting

Mohsen Esmaily, Nooshin Mortazavi Seyedeh, Jan-Erik Svensson et al
Materials Chemistry and Physics. Vol. 180, p. 29-37
Artikel i vetenskaplig tidskrift
2016

Corrosion behaviour of friction stir-welded AA6005-T6 using a bobbin tool

Mohsen Esmaily, Nooshin Mortazavi Seyedeh, W. Osikowicz et al
Corrosion Science. Vol. 111, p. 98-109
Artikel i vetenskaplig tidskrift
2015

On the capability of in-situ exposure in an environmental scanning electron microscope for investigating the atmospheric corrosion of magnesium

Mohsen Esmaily, Nooshin Mortazavi Seyedeh, Mehrdad Shahabi Navid et al
Ultramicroscopy. Vol. 153, p. 45-54
Artikel i vetenskaplig tidskrift
2015

Validating material modelling for OFHC copper using dynamic tensile extrusion (DTE) test at different velocity impact

Nicola Bonora, Gabriel Testa, Andrew Ruggiero et al
19th Biennial APS Conference on Shock Com- pression of Condensed Matter
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2015

In Situ ESEM Investigation of KCl-Induced Corrosion of a FeCrAl and a Model FeNiCrAl Alloy in Lab Air at 450 degrees C

Nooshin Mortazavi Seyedeh, Luciana Intiso, Niklas Israelsson et al
Journal of the Electrochemical Society. Vol. 162 (14), p. C744-C753
Artikel i vetenskaplig tidskrift
2015

Atmospheric Corrosion of Mg Alloy AZ91D Fabricated by a Semi-Solid Casting Technique: The Influence of Microstructure

Mohsen Esmaily, Nooshin Mortazavi Seyedeh, Jan-Erik Svensson et al
Journal of the Electrochemical Society. Vol. 162 (7), p. C311-C321
Artikel i vetenskaplig tidskrift
2015

Effect of thermal cycling on protective properties of alumina scale grown on thin Haynes 214 foil

A. Chyrkin, Nooshin Mortazavi Seyedeh, Mats Halvarsson et al
Corrosion Science. Vol. 98, p. 688-698
Artikel i vetenskaplig tidskrift
2015

Numerical simulation of deformation development during dynamic tensile extrusion of OFHC copper incorporating microstructure evolution

Nicola Bonora, Andrew Ruggiero, Simone Dichiaro et al
TMS Annual Meeting and Exibition
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2015

Effect of Rheocasting on Corrosion of AM50 Mg Alloy

Mohsen Esmaily, Nooshin Mortazavi Seyedeh, Mehrdad Shahabi Navid et al
Journal of the Electrochemical Society. Vol. 162 (3), p. C85-C95
Artikel i vetenskaplig tidskrift
2015

Development of advanced hybrid materials with the help of pulse electrodeposition

Uta Klement, Nooshin Mortazavi Seyedeh, Antonio Mulone et al
Transactions of the Institute of Metal Finishing. Vol. 93 (6), p. 296-301
Artikel i vetenskaplig tidskrift
2015

The capability of Transmission Kikuchi Diffraction technique for characterizing nano-grained oxide scales formed on a FeCrAl stainless steel

Nooshin Mortazavi Seyedeh, Mohsen Esmaily, Mats Halvarsson
Materials Letters. Vol. 147, p. 42-45
Artikel i vetenskaplig tidskrift
2015

Oxidation of a Dispersion-Strengthened Powder Metallurgical FeCrAl Alloy in the Presence of O2 at 1,100°C: The Influence of Water Vapour

Kristina M Hellström, Niklas Israelsson, Nooshin Mortazavi Seyedeh et al
Oxidation of Metals. Vol. 83 (5-6), p. 533-558
Artikel i vetenskaplig tidskrift
2015

Effects of cold working and heat treatment on microstructure and wear behaviour of Cu–Be alloy C17200

A. Khodabakhshi, V. Abouei, Nooshin Mortazavi Seyedeh et al
Tribology - Materials, Surfaces and Interfaces. Vol. 9 (3), p. 118-127
Artikel i vetenskaplig tidskrift
2015

Deformation and texture evolution of OFHC copper during dynamic tensile extrusion

Magnus Hörnqvist, Nooshin Mortazavi Seyedeh, Mats Halvarsson et al
Acta Materialia. Vol. 89, p. 163-180
Artikel i vetenskaplig tidskrift
2015

Numerical Simulation of Dynamic Tensile Extrusion Test of OFHC Copper

Nicola Bonora, Gabriel Testa, Andrew Ruggiero et al
Journal of Dynamic Behavior of Materials. Vol. 1, p. 136-152
Artikel i vetenskaplig tidskrift
2014

Mechanical properties of bulk- and hybrid nanocrystalline materials

Uta Klement, Nooshin Mortazavi Seyedeh, Johan Ahlström et al
Proceedings of the Risø International Symposium on Materials Science, p. 349-355
Paper i proceeding
2014

Microstructural characterization of the Mg-Al alloy AM50 produced by a newly developed rheo-casting process

Mohsen Esmaily, Mehrdad Shahabi Navid, Nooshin Mortazavi Seyedeh et al
Materials Characterization. Vol. 95, p. 50-64
Artikel i vetenskaplig tidskrift
2013

Microstructural characterization and formation of alpha ' martensite phase in Ti-6Al-4V alloy butt joints produced by friction stir and gas tungsten arc welding processes

Mohsen Esmaily, Nooshin Mortazavi Seyedeh, P. Todehfalah et al
Materials & Design. Vol. 47, p. 143-150
Artikel i vetenskaplig tidskrift
2013

Characterization of Surface Defects on Pulse-Electrodeposited Nickel Tubes

Uta Klement, Yiming Yao, Nooshin Mortazavi Seyedeh et al
Praktische Metallographie/Practical Metallography. Vol. 50 (12), p. 789-798
Artikel i övriga tidskrifter

Spara referenser

Om du har installerat Zotero eller Mendeley på din dator kan du direkt ta ut referenser från de publikationer du ser i listan.

Du laddar ner dessa pluginer här:
Zotero
Mendeley

Det finns inga projekt att visa.
Det kan finnas fler projekt där Nooshin Mortazavi Seyedeh medverkar, men du måste vara inloggad som anställd på Chalmers för att kunna se dem.