Jesper Liske

Docent vid Energi och material

Dr. Jesper Liske är Docent på avdelningen för Energi & Material. Hans forskning är inriktad mot förstå och lösa de korrosionsrelaterade problem som uppstår i kraftvärmeverk där förnyelsebara bränslen (såsom biomassa och avfall) används. Detta inbegriper både förbränning och förgasning av förnyelsebara bränslen. Forskningen ämnar till att med ökad förståelse minska korrosionen antigen genom att öka korrosionsmotståndet hos stålet eller genom att göra miljön mindre korrosiv (t.ex med hjälp av bränsleadditiv). På senare år har ett stort fokus mot BECCS (BioEnergy Carbon Capture & Storage) inletts där forskningen syftar till att få fram tekniker för koldioxidinfångning med bibehållen eller till och med ökad elproduktion.

Källa: chalmers.se

Kontaktuppgifter ORCID

Publikationer (57)
Projekt (9)

Visar 57 publikationer

2024

A time-resolved study of PbCl2-induced corrosion of low-alloyed steel in the presence of water vapour at 400 °C

Hampus Lindmark, Torbjörn Jonsson, Jesper Liske

Corrosion Science. Vol. 229

Artikel i vetenskaplig tidskrift

2024

High-Temperature corrosion of P91/T91, 304L, Sanicro 28 and Inconel 625 exposed at 600 °C under continuous KCl deposition

Julien Phother Simon, Imran Hanif, Torbjörn Jonsson et al

Fuel. Vol. 357

Artikel i vetenskaplig tidskrift

2023

High temperature corrosion resistance of FeCr(Ni, Al) alloys as bulk/overlay weld coatings in the presence of KCl at 600 °C

Vicent Ssenteza, Johan Eklund, Imran Hanif et al

Corrosion Science. Vol. 213

Artikel i vetenskaplig tidskrift

2023

A material degradation study of novel FeCrAl alloys, stainless steels and nickel base alloy in fluidized bed heat exchangers of a waste-fired CFB boiler

Hampus Lindmark, Julien Phother Simon, Maria Dolores Paz Olausson et al

Fuel. Vol. 338

Artikel i vetenskaplig tidskrift

2023

The influence of oxygen partial pressure on the base oxide of chromia forming steels: The story prior to breakaway oxidation

Mohammad Sattari, Hamed Hoseini Hooshyar, Jesper Liske et al

Corrosion Science. Vol. 213

Artikel i vetenskaplig tidskrift

2022

A Comparison of the Oxidation and Nitridation Properties of Selected Chromia- and Alumina-Forming Alloys at 800 degrees C

Tommy Sand, Jesper Liske, T. Helander et al

Oxidation of Metals. Vol. 98 (1-2), p. 163-178

Artikel i vetenskaplig tidskrift

2021

The influence of a KCl-rich environment on the corrosion attack of 304 L: 3D FIB/SEM and TEM investigations

Julien Phother Simon, Imran Hanif, Jesper Liske et al

Corrosion Science. Vol. 183

Artikel i vetenskaplig tidskrift

2021

Combined measurement techniques for fast detection of alkali release in fluidized bed combustion

Tomas Leffler, Fredrik Lind, Jesper Liske et al

CFB 2021 - Proceedings of the 13th International Conference on Fluidized Bed Technology, p. 339-344

Paper i proceeding

2020

Continuous KCl addition in high temperature exposures of 304 L – A way to mimic a boiler environment

Julien Phother Simon, Torbjörn Jonsson, Jesper Liske

Corrosion Science. Vol. 167

Artikel i vetenskaplig tidskrift

2020

Beyond breakaway corrosion – Influence of chromium, nickel and aluminum on corrosion of iron-based alloys at 600 °C

Amanda Persdotter, Johan Eklund, Jesper Liske et al

Corrosion Science. Vol. 177

Artikel i vetenskaplig tidskrift

2020

The Influence of KCl and HCl on the High-Temperature Oxidation of a Fe-2.25Cr-1Mo Steel at 400 °C

Erik Larsson, Jesper Liske, Amanda Persdotter et al

Oxidation of Metals. Vol. 93 (1-2), p. 29-52

Artikel i vetenskaplig tidskrift

2020

Oxidation of Fe-2.25Cr-1Mo in presence of KCl(s) at 400 °C – Crack formation and its influence on oxidation kinetics

Amanda Persdotter, Mohammad Sattari, Erik Larsson et al

Corrosion Science. Vol. 163

Artikel i vetenskaplig tidskrift

2019

The Influence of Oxide-Scale Microstructure on KCl(s)-Induced Corrosion of Low-Alloyed Steel at 400 °C

Mercedes Andrea Olivas Ogaz, Johan Eklund, Amanda Persdotter et al

Oxidation of Metals. Vol. 91 (3-4), p. 291-310

Artikel i vetenskaplig tidskrift

2019

Oxidation Driven Permeation of Iron Oxide Scales by Chloride from Experiment Guided First-Principles Modeling

Valentina Cantatore, Mercedes Andrea Olivas Ogaz, Jesper Liske et al

Journal of Physical Chemistry C. Vol. 123 (42), p. 25957-25966

Artikel i vetenskaplig tidskrift

2019

High-Temperature Corrosion of HVAF-Sprayed Ni-Based Coatings for Boiler Applications

Johan Eklund, Julien Phother Simon, E. Sadeghi et al

Oxidation of Metals. Vol. 91 (5-6), p. 729-747

Artikel i vetenskaplig tidskrift

2019

Field exposure of FeCrAl model alloys in a waste-fired boiler at 600°C: The influence of Cr and Si on the corrosion behaviour

Johan Eklund, Maria Dolores Paz Olausson, B. Jonsson et al

Materials and Corrosion. Vol. 70 (8), p. 1476-1485

Artikel i vetenskaplig tidskrift

2018

Correlation between field and laboratory exposures for boiler corrosion test – mechanistic study of chlorine induced corrosion.

Mercedes Andrea Olivas Ogaz, Maria Dolores Paz, Torbjörn Jonsson et al

Proceedings of the 23rd International Conference on FBC, p. 318-325

Paper i proceeding

2018

Effect of water vapor on the oxidation behavior of HVAF-sprayed NiCr and NiCrAlY coatings

Esmaeil Sadeghimeresht, Johan Eklund, Julien Phother Simon et al

Materials and Corrosion - Werkstoffe und Korrosion. Vol. 69 (10), p. 1431-1440

Artikel i vetenskaplig tidskrift

2018

The influence of silicon on the corrosion properties of FeCrAl model alloys in oxidizing environments at 600 °C

Johan Eklund, B. Jonsson, Amanda Persdotter et al

Corrosion Science. Vol. 144, p. 266-276

Artikel i vetenskaplig tidskrift

2017

Investigating corrosion memory: The influence of previous boiler operation on current corrosion rate

Maria Dolores Paz, Dongmei Zhao, Sofia Karlsson et al

Fuel Processing Technology. Vol. 156, p. 348-356

Artikel i vetenskaplig tidskrift

2017

High-Temperature Oxidation of FeCr(Ni) Alloys: The Behaviour After Breakaway

Torbjörn Jonsson, H. Larsson, Sofia Karlsson et al

Oxidation of Metals. Vol. 87 (3-4), p. 333-341

Artikel i vetenskaplig tidskrift

2017

A Comparative Study of the Initial Corrosion of KCl and PbCl2 on a Low-Alloyed Steel

Erik Larsson, Hans Gruber, Kristina M Hellström et al

Oxidation of Metals. Vol. 87 (5-6), p. 779-787

Artikel i vetenskaplig tidskrift

2017

Microstructural Study of the Influence of KCl and HCl on Preformed Corrosion Product Layers on Stainless Steel

Mercedes Andrea Olivas Ogaz, Johan Eklund, Jan-Erik Svensson et al

Oxidation of Metals. Vol. 87 (5-6), p. 801-811

Artikel i vetenskaplig tidskrift

2016

A Laboratory Study of the in Situ Sulfation of Alkali Chloride Rich Deposits: Corrosion Perspective

Sofia Karlsson, Erik Larsson, Torbjörn Jonsson et al

Energy & Fuels. Vol. 30 (9), p. 7256-7267

Artikel i vetenskaplig tidskrift

2016

Oxidation After Breakdown of the Chromium-Rich Scale on Stainless Steels at High Temperature: Internal Oxidation

Torbjörn Jonsson, Sofia Karlsson, Hamed Hoseini Hooshyar et al

Oxidation of Metals. Vol. 85 (5-6), p. 509-536

Artikel i vetenskaplig tidskrift

2016

The Effect of H-2 and H2O on the Oxidation of 304L-Stainless Steel at 600 A degrees C: General Behaviour (Part I)

Hamed Hoseini Hooshyar, Torbjörn Jonsson, J. Hall et al

Oxidation of Metals. Vol. 85 (3-4), p. 321-342

Artikel i vetenskaplig tidskrift

2015

Initial corrosion attack of 304L and T22 in 2 MW biomass gasifier: a microstructural investigation

Hamed Hoseini Hooshyar, Jesper Liske, Lars-Gunnar Johansson et al

Materials at High Temperatures. Vol. 32 (1-2), p. 197-204

Artikel i vetenskaplig tidskrift

2015

The effect of startup procedure of probe exposures on deposit and corrosion formation in a waste fired CFB boiler.

Mercedes Andrea Olivas Ogaz, Maria Dolores Paz, Torbjörn Jonsson et al

Övrigt konferensbidrag

2015

Reducing high-temperature corrosion on high- alloyed stainless steel superheaters by co-combustion of municipal sewage sludge in a fluidised bed boiler

Sofia Karlsson, Lars-Erik Åmand, Jesper Liske

Fuel. Vol. 139, p. 482-493

Artikel i vetenskaplig tidskrift

2014

Mitigation of Fireside Corrosion of Stainless Steel in Power Plants: A Laboratory Study of the Influences of SO2 and KCl on Initial Stages of Corrosion

Sofia Karlsson, Torbjörn Jonsson, Josefin Hall et al

Energy & Fuels. Vol. 28 (5), p. 3102-3109

Artikel i vetenskaplig tidskrift

2014

Sulfur recirculation for increased electricity production in Waste-to-Energy plants

S. Andersson, E. W. Blomqvist, L. Bafver et al

Waste Management. Vol. 34 (1), p. 67-78

Artikel i vetenskaplig tidskrift

2013

Two Strategies to Reduce Gaseous KCl and Chlorine in Deposits during Biomass Combustion - Injection of Ammonium Sulphate and Co-Combustion with Peat

Håkan Kassman, Jesper Pettersson, Britt-Marie Steenari et al

Fuel Processing Technology. Vol. 105, p. 170-180

Artikel i vetenskaplig tidskrift

2012

Study of Bed Material Agglomeration in A Horizontal Circulating Fluidized Bed Boiler Burning Rice Husk

Dongmei Zhao, Jesper Pettersson, Britt-Marie Steenari et al

Proceedings of the 21:st International Conference on Fluidized Bed Combustion

Paper i proceeding

2012

Alkali Induced High Temperature Corrosion of Stainless Steel: The Influence of NaCl, KCl and CaCl2

Sofia Karlsson, Jesper Pettersson, Lars-Gunnar Johansson et al

Oxidation of Metals. Vol. 78 (1-2), p. 83-102

Artikel i vetenskaplig tidskrift

2012

The effect of SO2(g) on the initial stages of KCl induced high temperature corrosion of 304L at 600°C

Sofia Karlsson, Torbjörn Jonsson, Josefin Engkvist et al

8th International Symposium on High-Temperature Corrosion and Protection of Materials

Övrigt konferensbidrag

2011

The Effects of KCl, K2SO4 and K2CO3 on the High Temperature Corrosion of a 304-Type Austenitic Stainless Steel

Jesper Pettersson, Nicklas Folkeson, Lars-Gunnar Johansson et al

Oxidation of Metals. Vol. 76 (1-2), p. 93-109

Artikel i vetenskaplig tidskrift

2011

KCl-Induced High Temperature Corrosion of Austenitic Stainless Steel 304L – The Influence of SO2

Sofia Karlsson, Jesper Pettersson, Jan-Erik Svensson et al

Materials Science Forum. Vol. 696, p. 224-229

Artikel i vetenskaplig tidskrift

2011

Reducing High Temperature Corrosion when Burning Waste by Adding Digested Sewage Sludge

Sofia Karlsson, Lars-Erik Åmand, Jesper Pettersson

Swedish - Finnish Flame Days, January 26-27 2011 in Piteå, Sweden, The Swedish and Finnish National Committees of the International Flame Research Foundation (IFRF) and The Scandinavian - Nordic Section of the Combustion Institute (SNCI)

Övrigt konferensbidrag

2010

Ammonium Sulphate and Co-Combustion with Peat – Two Strategies to Reduce Gaseous KCl and Chlorine in Deposits during Biomass Combustion

Håkan Kassman, Jessica Malene Bohwalli, Jesper Pettersson et al

In Proceedings from: "Impacts of Fuel Quality on Power Production & Environment", Lapland, Finland, August 29th - September 3rd 2010

Övrigt konferensbidrag

2010

Sewage sludge as additive to reduce the initial fireside corrosion caused by combustion of shredder residues in a waste-fired BFB boiler.

Torbjörn Jonsson, Jesper Pettersson, Kent Davidsson et al

9th Liège Conference on Materials for Advanced Power Engineering.

Paper i proceeding

2009

KCl-Induced Corrosion of a 304-type Austenitic Stainless Steel in O-2 and in O-2 + H2O Environment: The Influence of Temperature

Jesper Pettersson, Jan-Erik Svensson, Lars-Gunnar Johansson

Oxidation of Metals. Vol. 72 (3-4), p. 159-177

Artikel i vetenskaplig tidskrift

2009

The influence of KCl on the corrosion of an austenitic stainless steel (304L) in oxidizing humid conditions at 600 ºC: A microstructural study

Torbjörn Jonsson, Jan Froitzheim, Jesper Pettersson et al

Oxidation of Metals. Vol. 72 (3), p. 213-239

Artikel i vetenskaplig tidskrift

2008

Alkali Induced Corrosion of 304-type Austenitic Stainless Steel at 600°C; Comparison between KCl, K2CO3 and K2SO4

Jesper Pettersson, Jan-Erik Svensson, Lars-Gunnar Johansson

Materials Science Forum. Vol. 595-598, p. 367-375

Artikel i vetenskaplig tidskrift

2008

Fireside corrosion of stainless and low alloyed steels in a waste-fired CFB boiler; The effect of adding sulphur to the fuel

Nicklas Folkeson, Jesper Pettersson, Carolina Pettersson et al

Materials Science Forum. Vol. 595-598, p. 289-297

Artikel i vetenskaplig tidskrift

2008

Alkali Induced High Temperature Corrosion of Stainless Steel - Experiences from Laboratory and Field

Jesper Pettersson

Doktorsavhandling

2007

Ramprogram – Åtgärder för samtidig minimering av alkalirelaterade driftproblem, Etapp 2

S. Herstad-Svärd, M. Gyllenhammar, Kent Davidsson et al

Rapport

2007

Potassium, chlorine, and sulfur in ash, particles, deposits, and corrosion during wood combustion in a circulating fluidized-bed boiler

Kent Davidsson, Lars-Erik Åmand, Bo G Leckner et al

Energy & Fuels. Vol. 21 (1), p. 71-81

Artikel i vetenskaplig tidskrift

2007

Critical corrosion phenomena on superheaters in biomass and waste-fired boilers

Lars-Gunnar Johansson, Jan-Erik Svensson, Erik Skog et al

Journal of Iron and Steel Research International. Vol. 14, p. 35-39

Artikel i vetenskaplig tidskrift

2006

Inverkan av svaveltillsatser på överhettarkorrosion, emissioner och askkvalitet i en bioeldad anläggning

Erik Skog, Oliver Lindqvist, Nicklas Folkeson et al

Rapport till STEM

Artikel i övrig tidskrift

2006

KCl-Induced High Temperature Corrosion of the Austenitic Fe-Cr-Ni Alloys 304L and Sanicro 28 at 600 °C

Carolina Pettersson, Jesper Pettersson, Henrik Asteman et al

Corrosion Science. Vol. 48 (6), p. 1368-1378

Artikel i vetenskaplig tidskrift

2006

The influence of sulphur additions on the corrosive environment in a waste-fired CFB boiler

Jesper Pettersson, Carolina Pettersson, Nicklas Folkeson et al

Materials Science Forum. Vol. 522-523, p. 563-570

Artikel i vetenskaplig tidskrift

2005

Microstructural investigation of the influence of KCl on the corrosion of 304L exposed to 5% O2 + N2

Torbjörn Jonsson, Jan Froitzheim, Jesper Pettersson et al

16th International Corrosion Congress, September 19-24 2005, Beijing, China, p. Paper 6-45

Paper i proceeding

2005

KCl induced corrosion of a 304-type austenitic stainless steel at 600 degrees C; The role of potassium

Jesper Pettersson, Henrik Asteman, Jan-Erik Svensson et al

Oxidation of Metals. Vol. 64 (1-2), p. 23-41

Artikel i vetenskaplig tidskrift

2005

Alkali Induced Corrosion of 304L, The Influence of Potassium Salts and Water Vapour

Jesper Pettersson

Licentiatavhandling

2005

The influence of sulphur additions on the corrosive environment in a waste-fired CFB boiler

Jesper Pettersson, Carolina Pettersson, Nicklas Folkeson et al

Materials Science Forum. Vol. 522-523, p. 563-570

Artikel i vetenskaplig tidskrift

2004

A pilot plant study of the effect of alkali salts on initial stages of the high temperature corrosion of alloy 304L

Jesper Pettersson, Carolina Pettersson, Henrik Asteman et al

Materials Science Forum. Vol. 461-464, p. 965-972

Artikel i vetenskaplig tidskrift

2004

Is KCl(g) corrosive at temperatures above its dew point? - Influence of KCl(g) on initial stages of the high temperature corrosion of 11% Cr steel at 600 degrees C

Karin Segerdahl, Jesper Pettersson, Jan-Erik Svensson et al

High Temperature Corrosion and Protection of Materials 6, Prt 1 and 2, Proceedings. Vol. 461-464, p. 109-116

Artikel i vetenskaplig tidskrift

Ladda ner publikationslistor

Du kan ladda ner denna lista till din dator.

Filtrera och ladda ner publikationslista

Som inloggad användare hittar du ytterligare funktioner i MyResearch.

Du kan även exportera direkt till Zotero eller Mendeley genom webbläsarplugins. Dessa hittar du här:

Zotero Connector
Mendeley Web Importer

Tjänsten SwePub erbjuder uttag av Researchs listor i andra format, till exempel kan du få uttag av publikationer enligt Harvard och Oxford i .RIS, BibTex och RefWorks-format.

Visar 9 forskningsprojekt

2020–

High temperature corrosion and ash research, part 2

Jan-Erik Svensson Energi och material

Sedigheh Bigdeli Oorganisk miljökemi 1

Jesper Liske Oorganisk miljökemi 1

Torbjörn Jonsson Oorganisk miljökemi 1

Chalmers

2019–2020

Transformation of existing power plants – a paradigm shift towards higher plant efficiencies and full fuel flexibility

Pavleta Knutsson Oorganisk miljökemi 1

Jesper Liske Oorganisk miljökemi 1