Maciej Wysocki

Visar 32 publikationer

2021

Characterisation of tape-based carbon fibre thermoplastic discontinuous composites for energy absorption

Sachin Francis, Thomas Bru, Leif Asp et al
Plastics, Rubber and Composites. Vol. 50 (7), p. 351-361
Artikel i vetenskaplig tidskrift
2016

Holistic modeling of composites manufacturing using poromechanics

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
Advanced Manufacturing: Polymer and Composites Science. Vol. 2
Artikel i vetenskaplig tidskrift
2015

Experimental assessment of coupled dual-scale flow-deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
Composites Part A: Applied Science and Manufacturing. Vol. 76, p. 215-223
Artikel i vetenskaplig tidskrift
2015

Characterisation of viscoelastic material properties during curing processes

Vineeth Saseendran, Maciej Wysocki, Janis Varna
ICCM International Conferences on Composite Materials. Vol. 2015-July
Paper i proceeding
2014

The out-of-plane behaviour of spread-tow fabrics

Maciej Wysocki, M. Szpieg, P. Hellström et al
16th European Conference on Composite Materials, ECCM 2014; Seville; Spain; 22 June 2014 through 26 June 2014
Paper i proceeding
2014

Process modeling of composite materials - a holistic and generic simulation tool using poromechanics

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
Proceedings of the 12th International Conference on Flow Processing in Composite Materials (FPCM12), Enschede, Netherlands, 14-16 July 2014
Paper i proceeding
2014

Poromechanical modelling the pre- and post-filling flows in composite manufacturing

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki
14th European Mechanics of Materials Conference (EMMC14)
Paper i proceeding
2013

Modeling of coupled dual-scale flow–deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
Composites Part A: Applied Science and Manufacturing. Vol. 46 (1), p. 108-116
Artikel i vetenskaplig tidskrift
2013

FE modeling and numerical implemtation of flow-deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
ICCM International Conferences on Composite Materials. Vol. 2013-July, p. 5292-5299
Paper i proceeding
2013

Modeling dual-scale flow-deformation processes in composites manufacturing

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
Proc. of the 26th Nordic Seminar on Computational Mechanics (NSCM26), Oslo, Norway, 23-25 October 2013
Paper i proceeding
2013

MODELLING DUAL-SCALE FLOW-DEFORMATION PROCESSES IN COMPOSITES MANUFACTURING

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
19th International Conference on Composite Material (ICCM19) - Montreal - Canada 2013
Paper i proceeding
2012

MODELING THE CONSTITUTIVE RESPONSE OF AN ANISOTROPIC DUAL-SCALE FLOW

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
11th International Conference on Flow Processing in Composite Materials (FPCM11) - Auckland - New Zealand 2012
Paper i proceeding
2012

Composite manufacturing modeling using porous media theory

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
25th Nordic Seminar on Computational Mechanics (NSCM25), Lund, Swede, 25-26 October 2012, p. 295-298
Paper i proceeding
2012

CONSTITUTIVE MODELLING OF ANISOTROPIC TWO-SCALE FLOW

Mohammad Sadegh Rouhi, Maciej Wysocki, Ragnar Larsson
15th European Conference on Composite Material (ECCM15) - Venice- Italy 2012
Paper i proceeding
2012

Free surface flow and preform deformation in composites manufacturing based on porous media theory

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki
European Journal of Mechanics, A/Solids. Vol. 31 (1), p. 1-12
Artikel i vetenskaplig tidskrift
2011

Modeling resin flow, preform deformations and residual stresses in RTM manufacturing

Mohammad Sadegh Rouhi, Ragnar Larsson, Maciej Wysocki
Proc. of International Conference on Manufacturing of Advanced Composites, ICMAC 2011, Belfast, Northern Ireland
Paper i proceeding
2011

Resin Flow and Preform Deformation in Composites Manufacturing Based on a Partially Saturated Porous Medium

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki
Computational Plasticity XI - Fundamentals and applications
Paper i proceeding
2010

Infusion modelling using two-phase porous media theory

Ragnar Larsson, Mohammad Sadegh Rouhi, Maciej Wysocki
Proc. IV European Conference on Computational Mechanics (ECCM IV 2010), Paris, France
Paper i proceeding
2010

Modeling resin flow and preform deformation in composite manufacturing based on partially saturated porous media theory

Mohammad Sadegh Rouhi, Ragnar Larsson, Maciej Wysocki
Procedeing of 23rd Nordic Seminar on Computational Mechanics, p. 142-145
Paper i proceeding
2010

Anisotropic and tension-compression asymmetric model for composites consolidation

Maciej Wysocki, Staffan Toll, Ragnar Larsson et al
Composites Part A: Applied Science and Manufacturing. Vol. 41 (2), p. 284-294
Artikel i vetenskaplig tidskrift
2010

Modelling multiple scales in composites manufacturing

Maciej Wysocki, Ragnar Larsson, Staffan Toll
Proceedings of The 10th International Conference on Flow Processes in Composite Materials (FPCM10), Monte Verità, Ascona, CH – July 11-15, 2010
Paper i proceeding
2009

Modelling the consolidation of partially impregnated prepregs

Maciej Wysocki, Ragnar Larsson, Staffan Toll
17th International Conference on Composite Materials, ICCM-17; Edinburgh; United Kingdom; 27 July 2009 through 31 July 2009
Paper i proceeding
2009

Two phase continuum modelling of composites consolidation

Maciej Wysocki, L. E. Asp, Staffan Toll et al
Plastics, Rubber and Composites. Vol. 38 (2-4), p. 93-97
Artikel i vetenskaplig tidskrift
2008

TWO-PHASE CONTINUUM MODELLING OF COMPOSITES CONSOLIDATION

Maciej Wysocki, Leif Asp, Staffan Toll et al
Proc. of 13th European Conference on Composite Material, Stockholm, Sweden
Paper i proceeding
2008

Hyperelastic Constitutive Models for Consolidation of Commingled Yarn Based Composites

Maciej Wysocki, Staffan Toll, Ragnar Larsson et al
proceedings of 9th International Conference on Flow Processes in Composite Materials
Paper i proceeding
2007

Constitutive models for consolidation of commingled yarn based composites

Maciej Wysocki, Ragnar Larsson, Staffan Toll
Euromech Colloquium 489 - "Modelling Multiphase Materials", Chalmers, Göteborg, Sweden, Sept. 19 - 21
Övrigt konferensbidrag
2006

Continuum modelling of composites consolidation

Maciej Wysocki
Doktorsavhandling
2005

Finite element model for axisymmetric consolidation of thermoplastic composite materials

Maciej Wysocki, Leif Asp, Staffan Toll et al
Proc. ASC 20th Annual Technical Conference, September 7-9, Philadelphia, USA
Paper i proceeding
2005

Process rheology of fibre composites

Staffan Toll, Ragnar Larsson, Maciej Wysocki et al
Proc. Nordiska Polymerdagarna, August 17-19, Gothenburg, Sweden
Övrigt konferensbidrag
2004

Process modeling of composites using two-phase porous media theory

Ragnar Larsson, Staffan Toll, Maciej Wysocki
Eur. J. Mech. A/Solids. Vol. 23, p. 15-36
Artikel i vetenskaplig tidskrift
2003

Modelling press forming of fibre composites using two-phase continuum theory

Maciej Wysocki, Ragnar Larsson, Staffan Toll
Polish.Swedish Symposium, Gothenburg, Dec 12, 2003
Artikel i vetenskaplig tidskrift
2002

Wysocki, Maciej

Maciej Wysocki, Ragnar Larsson, Staffan Toll
9th Int. Conf. on Fibre Reinforced Composites, FRC 2002.
Paper i proceeding

Ladda ner publikationslistor

Du kan ladda ner denna lista till din dator.

Filtrera och ladda ner publikationslista

Som inloggad användare hittar du ytterligare funktioner i MyResearch.

Du kan även exportera direkt till Zotero eller Mendeley genom webbläsarplugins. Dessa hittar du här:

Zotero Connector
Mendeley Web Importer

Tjänsten SwePub erbjuder uttag av Researchs listor i andra format, till exempel kan du få uttag av publikationer enligt Harvard och Oxford i .RIS, BibTex och RefWorks-format.

Det finns inga projekt att visa.
Det kan finnas fler projekt där Maciej Wysocki medverkar, men du måste vara inloggad som anställd på Chalmers för att kunna se dem.