Maria Knutson Wedel

Biträdande professor vid Chalmers, Industri- och materialvetenskap, Material och tillverkning

Maria Knutson Wedel är Chalmers vicerektor för utbildning och livslångt lärande, med ansvar för såväl grundutbildning som uppdragsutbildning. Vicerektor leder grundutbildningsorganisationen, som består av fyra utbildningsområden där Chalmers utbildningsprogram ingår och är också processägare för huvudprocessen Att utbilda. Processen omfattar utbildningsverksamhetens olika delar som studentrekrytering, antagning, examination, pedagogisk kompetensutveckling, lärandemiljöer, internationalisering och utbildningens samverkan med skola och näringsliv. Maria är även ytterst ansvarig för kvalitetssäkringen av Chalmers utbildning.Maria Knutson Wedel är biträdande professor i konstruktionsmaterial sedan 2009. Hon blev civilingenjör i teknisk fysik 1988 och doktorerade i fysik 1996.

Källa: chalmers.se

Visar 36 publikationer

2016

Betyg i högre utbildning

Hans Adolfsson, Ulf Dalnäs, Linda Gerén et al
Rapport
2013

Integration of education for sustainable development in the mechanical engineering curriculum

Mikael Enelund, Maria Knutson Wedel, Ulrika Lundqvist et al
Australasian Journal of Engineering Education. Vol. 19 (1), p. 51-62
Artikel i vetenskaplig tidskrift
2013

Dielectric loss determination of fine residual waste electrical and electronic equipment for understanding of heat development during microwave pyrolysis

Mattias Andersson, Maria Knutson Wedel, Kristoffer Andersson
Journal of Analytical and Applied Pyrolysis. Vol. 103, p. 142-148
Artikel i vetenskaplig tidskrift
2012

Integration of education for sustainable development in a mechanical engineering programme

Mikael Enelund, Maria Knutson Wedel, Ulrika Lundqvist et al
Proceedings of the 8th International CDIO Conference, Brisbane, Austraila
Paper i proceeding
2012

Microwave assisted pyrolysis of residual fractions of waste electrical and electronics equipment

Mattias Andersson, Maria Knutson Wedel, Christer Forsgren et al
Minerals Engineering. Vol. 29, p. 105-111
Artikel i vetenskaplig tidskrift
2012

SUSTAINABLE PRODUCTION RESEARCH: AWARENESS, MEASURES AND DEVELOPMENT

Björn Johansson, Andreas Dagman, Emma Rex et al
International Journal of Sustainable Development. Vol. 4 (11), p. 95-104
Artikel i vetenskaplig tidskrift
2012

Embedding of ESD in engineering education: Experiences from Chalmers University of Technology

Magdalena Svanström, Ulrika Palme, Maria Knutson Wedel et al
International Journal of Sustainability in Higher Education. Vol. 13 (3), p. 279-292
Artikel i vetenskaplig tidskrift
2011

Sustainable Production Research- a proposal of measuring research in sustainable production and monitoring of sustainability awareness

Andreas Dagman, Maria Knutson Wedel, Björn Johansson
The Adlerbert Research Foundation Jubilee Conference, 22 november 2011
Poster (konferens)
2011

Sustainable Production Research - a Proposed Method to Design the Measures

Maria Knutson Wedel, Björn Johansson, Andreas Dagman et al
Proceedings of 18th CIRP International Confrence on Life Cycle Engineering, Braunschweig, 2011
Paper i proceeding
2011

Activating deep approach to learning in large classes through quizzes

Maria Knutson Wedel
Proceedings of the 7th International CDIO Confrence, Technical University of Denmark, 2011, p. på CD-
Paper i proceeding
2011

Constructive Alignment (CA) for Degree Projects - Intended Learning Outcomes, Teaching and Assessment

Johan Malmqvist, Maria Knutson Wedel, Mikael Enelund
Proceedings of 7th International CDIO Conference, Copenhagen, Denmark
Paper i proceeding
2010

Embedding of ESD in engineering education - experiences from Chalmers University of Technology

Magdalena Svanström, Michael Eden, Thomas Nyström et al
Engineering Education in Sustainable Development, Gothenburg, Sweden
Paper i proceeding
2010

A New Introduction to a Master Programme in Materials Science, Turning Student Diversity into an Advantage

Maria Knutson Wedel, Henrik Persson
Proceedings of the 6th International Conference, Montreal, Canada, 2010
Paper i proceeding
2010

The effect of cold ring rolling on the evolution of microstructure and texture in 100Cr6 steel

Kristina Ryttberg, Maria Knutson Wedel, Viktor Recina et al
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. Vol. 527 (9), p. 2431-2436
Artikel i vetenskaplig tidskrift
2010

Ten Years of CDIO - Experiences from a Long-Term Education Development Process

Johan Malmqvist, Johan Bankel, Mikael Enelund et al
Proceedings of the 6th International CDIO Conference, Montreal, Canada
Paper i proceeding
2010

To improve the ability to reflect on your own research in relation to sustainable development - experiences from a course for PhD students at Chalmers University of Technology

Magdalena Svanström, Anna Nyström Claesson, Jonas Nässén et al
Proceedings of Engineering Education in Sustainable Development, Gothenburg, Sweden, 2010
Paper i proceeding
2009

Experiences of and Improvement of Writing Skills in a Lecture Based Course in Polymeric Materials

Maria Knutson Wedel, Rodney Rychwalski, Mikael Rigdahl et al
Proceedings of the 5th International CDIO Conference, Singapore
Paper i proceeding
2009

Microstructural evolution during fracture induced by high strain rate deformation of 100Cr6 steel

Kristina Ryttberg, Maria Knutson Wedel, Patrik Dahlman et al
Journal of Materials Processing Technology. Vol. 209 (7), p. 3325-3334
Artikel i vetenskaplig tidskrift
2008

High strain rate deformation induced by high-velocity forming of 100Cr6 steel

Kristina Ryttberg, Maria Knutson Wedel, Patrik Dahlman et al
proceedings of The 9th International Conference on Technology of Plasticity (ICTP), Gyeongju, Korea, September 7-11, 2008, p. On CD or www.ictp2008.org-
Paper i proceeding
2008

Implementing Engineering Education for Environmental Sustainability into CDIO Programs

Maria Knutson Wedel, Johan Malmqvist, Marie Arehag et al
Proceedings of the 4th International CDIO Conference, Gent, Belgium
Paper i proceeding
2008

Microstructure and texture development during ring rolling of 100Cr6

Kristina Ryttberg, Maria Knutson Wedel, Lars Nyborg et al
Ceramic Transactions. Vol. 200, p. 301-309
Paper i proceeding
2008

Electron microscopy of white-etching band generated by high-velocity parting-off of 100CrMn6 steel

Kristina Ryttberg, Maria Knutson Wedel, Lars Nyborg
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. Vol. 480 (1-2), p. 489-495
Artikel i vetenskaplig tidskrift
2007

To Rescue Eggs - A Design-Build-Test Experience for Children

Per-Anders Träff, Maria Knutson Wedel, Göran Gustafsson et al
Proceedings of the 3rd International CDIO Conference, MIT, Cambridge, Massachusetts, June 11-14
Paper i proceeding
2007

Electrical properties of CNT/melamine-formaldehyde composites

Liliana Licea Jimenez, Maria Knutson Wedel, E.F. Prokhorov et al
Polymer Processing Society Europe/Africa Regional Meeting, PPS07 EA, 28-30 August, Göteborg, Sweden, 2007 (Proceedings on CD)
Paper i proceeding
2007

Thermal Vacancy Hardening in Fe100-xAlx (28<x<40)

HELENA SKOGLUND, Maria Knutson Wedel, Birger Karlsson
Intermetallics. Vol. 15 (8), p. 1127-1131
Artikel i vetenskaplig tidskrift
2007

Teaching and Learning

Kristina Edström, Diane Soderholm, Maria Knutson Wedel
Rethinking Engineering Education, the CDIO approach. Authors E. Crawley, J. Malmqvist, D. Brodeur, S. Östlund (Springer New York) ISBN 978-0-387-38287-6, p. 130-151
Kapitel i bok
2007

Imparting electrical conductivity to MF by adding nanotubes as fillers

Liliana Licea Jimenez, Maria Knutson Wedel, E.F. Prokhorov et al
CNTNET 07, University of Cambridge, 10-12 September, Cambridge (UK), 2007
Paper i proceeding
2007

CDIO Applied in the Context of Materials Science

Maria Knutson Wedel, Johan Malmqvist, Peter Goodhew
Proceedings of the 3rd International CDIO Conference, MIT, Cambridge, Massachusetts, June 11-14
Paper i proceeding
2006

Microstructure of surface zones subjected to high-velocity parting-off

Kristina Ryttberg, Maria Knutson Wedel, Patrik Dahlman et al
Journal de Physique (France) IV,. Vol. 134 (EuroDymat 2006 suppl.), p. 1313-1318
Paper i proceeding
2006

Diffusion of Al during hot consolidation of FeAl

HELENA SKOGLUND, Maria Knutson Wedel, Birger Karlsson
Acta Materialia. Vol. 54, p. 3853-3861
Artikel i vetenskaplig tidskrift
2005

Active Learning Through Group Dialogue in a Project Course on Environmentally Adapted Product Development

Maria Knutson Wedel, Antal Boldizar, Johan Malmqvist
Proceedings 1st Annual CDIO Conference, p. 35-
Paper i proceeding
2005

A Systematic Approach to the Design and Development of Design-Build-Test Project Courses

Sven B Andersson, Johan Malmqvist, Maria Knutson Wedel et al
Proceedings of ICED-05, p. 381-382
Paper i proceeding
2004

Processing of fine-grained mechanically alloyed FeAl

HELENA SKOGLUND, Maria Knutson Wedel, Birger Karlsson
Intermetallics. Vol. 12, p. 977-983
Artikel i vetenskaplig tidskrift
2003

The role of oxygen in powder processing of FeAl

HELENA SKOGLUND, Maria Knutson Wedel, Birger Karlsson
Intermetallics. Vol. 11, p. 475-482
Artikel i vetenskaplig tidskrift
1996

The Microstructure of Metal Oxide Additive Silicon Nitride Ceramics

Maria Knutson Wedel
Doktorsavhandling
1991

The microstructure of hot isostatically pressed Si3N4ceramics

Maria Knutson Wedel
Licentiatavhandling

Spara referenser

Om du har installerat Zotero eller Mendeley på din dator kan du direkt ta ut referenser från de publikationer du ser i listan.

Du laddar ner dessa pluginer här:
Zotero
Mendeley

Det finns inga projekt att visa.
Det kan finnas fler projekt där Maria Knutson Wedel medverkar, men du måste vara inloggad som anställd på Chalmers för att kunna se dem.