Carl-Eric Hagentoft

2023

Mathematical Expressions for Prediction of the Effective Thermal Conductivity of Perfectly Packed Two-phase Mixtures

2023

Determination of the Effective Thermal Conductivity of Aerogel-based Coating Mortars Using Numerical Simulations- Random Packing

Model of thermal buoyancy in cavity-ventilated roof constructions

2022

Impact of weather conditions and building design on contaminant infiltration from crawl spaces in Swedish schools—Numerical modeling using Monte Carlo method

2021

Diagnostic protocol for thermal performance of district heating pipes in operation. Part 1: Estimation of supply pipe temperature by measuring temperature at valves after shutdown

2021

A conceptual model for how to design for building envelope characteristics. Impact of thermal comfort intervals and thermal mass on commercial buildings in U.S. climates

2021

Diagnostic protocol for thermal performance of district heating pipes in operation. Part 2: Estimation of present thermal conductivity in aged pipe insulation

2021

Risk assessment of joint sealing tape in joints between precast concrete sandwich panels resilient to climate change

2021

Stochastic simulation of rain intrusion through small defects due to water rivulet overpressure. Introducing a driving rain leakage potential

2021

Risk assessment framework to avoid serial failure for new technical solutions applied to the construction of a clt structure resilient to climate

2021

Glasade utrymmen för ett resurseffektivt, socialt och hälsofrämjande boende, Del 2. Designstöd för arkitektonisk utformning och teknisk design med avseende på användning och komfort

2020

Water vapor transport to a semi-infinite material with simultaneous varying surface relative humidity and temperature

2020

Implementing a framework for qualitative assessment of new technical solutions: A case study on CLT

2020

Pressure distribution around the thermal envelope - a parametric study of the impact from wind and temperature on contaminant transport within a building

2020

The Future Climate Moisture Susceptibility of Wall Assemblies: Analysis Based on Monte Carlo Simulation Using a Simplified Deterministic Hygrothermal Simulation Model

Coupling a Hydronic Heating Pavement to a Horizontal Ground Heat Exchanger for harvesting solar energy and heating road surfaces

2020

Moisture buffering in surface materials due to simultaneous varying relative humidity and temperatures: Experimental validation of new analytical formulas

2020

Relying on reference cases when evaluating new technical solutions? Evaluation of technical documentation in a case study

Contaminant Transport through the Thermal Envelope – Evaluation of Airflows Based on Numerical Modeling and Field Measurements

Introducing new technical solutions in the swedish construction industry: Interviews with key actors

Water vapor transport to material surfaces-Simplified analytical expressions for non-linear material properties

Impact of Variable Air Flow Rate in Energy Smart Window Curtains, on the Total Net Heat Gain- Analytical Solutions

Numerical Investigation of Anti-Icing Road Surfaces using Hydronic Heating Pavement- Parametric Study

Experimental and Modelling Study of the Energy Performance of New Types of Energy Smart Window Curtains

Generic algorithm to assess moisture susceptibility of simplified wall assemblies

Anti-icing of road surfaces using Hydronic Heating Pavement with low temperature

Method for Detecting Contaminant Transport through Leakages in a Condemned School

2018

Simulations of moisture gradients in wood subjected to changes in relative humidity and temperature due to climate change

2018

Numerical analysis of the influence of natural convection in attics - A CFD analysis

Hydronic Heating Pavement with Low Temperature: The Effect of Pre‐Heating and Fluid Temperature on Antiicing Performance

2018

Numerical Investigation of Harvesting Solar Energy and Anti-Icing Road Surfaces Using a Hydronic Heating Pavement and Borehole Thermal Energy Storage

2018

New algorithm for water leakages flow through rain screen deficiencies

An analysis of hydronic heating pavement to optimize the required energy for anti-icing

2018

Transient heat transfer and moisture load in cold attic constructions - A CFD analysis

Influence of heat transfer process in porous media with air cavity- A CFD analysis

CFD analysis of heat transfer in ventilated attics

Reliability of energy efficient building retrofitting - probability assessment of performance and cost (Annex 55, RAP-RETRO)

Performance factor for floor heating systems using new analytical formula

Field measurements on a district heating pipe with vacuum insulation panels

2016

Drying potential of cold attic using natural and controlled ventilation in different Swedish climates

2015

Effect from a Variable U-Value in Adaptive Building Components with Controlled Internal Air Pressure

Vakuumisoleringspaneler i gamla byggnader

2015

Annex 55 Reliability of Energy Efficient Building Retrofitting- Probability Assessment of Performance and Cost

Changing internal pressure to achieve variable thermal conductivity in thermal insulation

2015

Experimentell verifiering av förenklade och självreglerande golvvärmesystem för välisolerade bostäder

2015

Assessing the Thermal Performance of District Heating Twin Pipes with Vacuum Insulation Panels

2015

Effect smart solutions for district heating networks based on energy storage in buildings. Impact on indoor temperatures

2015

Annex 55 Reliability of Energy Efficient Building Retrofitting- Probability Assessment of Performance and Cost, (RAP-RETRO): Practice and guidelines

2015

Impact on the U-value due to airflows behind insulation modules attached to facades of old buildings

2015

Annex 55, Reliability of Energy Efficient Building Retrofitting - Probability Assessment of Performance and Cost, (RAP-RETRO): Stochastic Data

2015

Annex 55, Reliability of Energy Efficient Building Retrofitting - Probability Assessment of Performance and Cost, (RAP-RETRO): Probabilistic Tools

2015

Annex 55, Reliability of Energy Efficient Building Retrofitting - Probability Assessment of Performance and Cost, (RAP-RETRO): Framework for probabilistic assessment of performance of retrofitted building envelopes

Riskbedömningar och råd med fuktsäkra kallvindar

2014

Retrofitting of a listed brick and wood building using vacuum insulation panels on the exterior of the facade: Measurements and simulations

2014

Interior insulation retrofit of a historical brick wall using vacuum insulation panels: Hygrothermal numerical simulations and laboratory investigations

2014

Retrofitting a brick wall using vacuum insulation panels: measured hygrothermal effect on the existing structure

2014

Moisture safe cold attics - Assessment based on risk analyses of performance and cost

2013

Interior Insulation Retrofit of a Brick Wall Using Vacuum Insulation Panels: Design of a Laboratory Study to Determine the Hygrothermal Effect on Existing Structure and Wooden Beam Ends

Wooden stud walls with aerogel thermal insulation. Material properties and HAM-simulations

Fuktsäkra kallvindar – bedömning utifrån riskanalyser av funktion och kostnad

2013

Determination of specific heat capacity by transient plane source

2012

Using transient plane source sensor for determination of thermal properties of vacuum insulation panels

Efficient use of thermal mass in buildings

Using Transient Plane Source Sensor for Determination of Thermal Properties of Vacuum Insulation Panels

Determination of specific heat capacity by Transient Plane Source

2011

Measurements of Thermal Properties of Vacuum Insulation Panels by using Transient Plane Source Sensor

Energieffektiviseringar – vilka risker finns och hur ska de hanteras?

Stochastic Modeling of Moisture Supply in Dwellings Based on Moisture Production and Moisture Buffering Capacity

Application of model based predictive control for water-based floor heating in low energy residential buildings

Risk of performance failure in new and retrofitted building envelopes

Mould Growth Control in Cold Attics through Adaptive Ventilation. Validation by Field Measurements

Mold Growth Control in Cold Attics through Adaptive Ventilation: Validation by Field Measurements

Moisture induced deformation of a free thin plate - Analytical solution for step-changes and periodic variations of the ambient humidity by volume

Styrd ventilation av kallvindar – Uppföljning av fältförsök

Risk of performance failure in new

Mould growth control in cold attics through adaptive ventilation

Probabilistic analysis of air infiltration in low-rise buildings.

Mould growth control in cold attics through adaptive ventilation

Reliability analysis in building physics design.

Heat loss due to thermal bridges in a foundation with floor heating

Fuktsäkring av kallvindar

The International Building Physics Toolbox in Simulink

Probabilistic modelling of the heat loss performance of a building envelope

Energisk arkitektur: sköna, driftsäkra och energieffektiva byggnader

New design model for frost protection of a slab on grade

Influence of rain water percolation on ground heat losses and temperature for basement foundation

A Simulation Tool for Temperature and Moisture Dependent Transport of VOC's in Buildings

How Do We Implement Building Physics Knowledge to the Building Sector?

Modelling of Long Wave Radiation Exchange in Enclosures with Building Integrated Heating

Released Heat from a Line Source in a Foundation Construction

Frost Heave in Swedish Slab on Ground Foundations

Air Flow and Pressure Distribution in a Ventilated Rectangular Floor.

Probabilistic model PROMO for evaluation of air change rate distribution

Analytical Solution for Moisture Buffering Effect – Validation Exercises for Simulation Tools

Determination of Liquid Water Transfer Properties of Porous Building Materials and Development of Numerical Assessment Methods: Introduction to the EC HAMSTAD Project

Condensation Risk within Loose Fill Insulation Due to Natural Convection

The evaluation of the interface moisture conductivity between control volumes. Comparison between linear, harmonic and integral averaging

Frost Heave in Swedish Slab-on-Grade

Probabilistic Modeling of Dynamic U-Factor

Probabilistic Analysis of Indoor Surface Hygrothermal Conditions Accounting for Thermal and Hygric Memory of the Building Component.

Benchmarks for One-dimensional Cases of Combined Heat, Air and Moisture Transport in Building Components

Assessment Method of Numerical Prediction Models for Combined Heat, Air and Moisture Transfer in Building Components. Benchmarks for One-dimensional Cases

An example of application of limit state approach for reliability analysis of moisture performance of a building component

Presentation of the international building physics toolbox for Simulink

The influence of air transport in and around the building envelope on energy efficiency of the building

Application of risk assessment technique to moisture problems in buildings.

The Thermal Effects of Convection in Horizontal Insulation

2002

Simulink modelling tool for HAM system analyses in building physics

Vandrande fukt. Strålande värme – så fungerar hus

Introduction to Building Physics

Convection in Horizontal Insulation

Natural and Forced Convection in a Superposed Air and Porous Layer when Heated from below

Gestaltning och teknik i den komplexa byggandet: Ett programförslag för samverkan mellan A och V på VIA-plattformen