Sheng Guo

Professor at Materials and manufacture

Sheng Guo joined Chalmers University of Technology as an Assistant Professor in 2013. His main research areas are the alloy design and mechanical behavior of concentrated multi-component alloys, with equiatomic or close-to-equiatomic compositions, also known as high-entropy alloys (HEAs). HEAs have great potential to be used as high-temperature materials, and in environments where high hardness, high wear resistance, and high corrosion resistance are required.

Source: chalmers.se
Image of Sheng Guo

Showing 117 publications

2025

Achieving high strength and high-electrical-conductivity of Cu-Ni-Si alloys via regulating nanoprecipitation behavior through simplified process

Wenli Xue, Guoliang Xie, Xiaxu Huang et al
Journal of Materials Science and Technology. Vol. 216, p. 121-129
Journal article
2024

Additive Manufacturing of Interstitial Nitrogen-Strengthened CoCrNi Medium Entropy Alloy

Bala Malladi, Dmitri Riabov, Sheng Guo et al
Advanced Engineering Materials. Vol. 26 (16)
Journal article
2024

Cryogenic temperatures promote the pressure-induced polymorphic transition in CoCrFeMnNi high entropy alloy

Magnus Hörnqvist Colliander, Dorthe Haase, Konstantin Glazyrin et al
Journal of Applied Physics. Vol. 136 (11)
Journal article
2024

High Strain Rate Superplastic Flow and Fracture Characteristics of a Fine-Grained Eutectic High Entropy Alloy

S. R. Reddy, Xiaolong Li, Sheng Guo et al
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Vol. 55, p. 173-182
Journal article
2024

Quantifying local lattice distortions in refractory high-entropy alloys

Yao Hu, Lewis R. Owen, Helen Y. Playford et al
Physical Review Materials. Vol. 8 (8)
Journal article
2024

Revealing microstructural degradation mechanism induced by interdiffusion between Amdry365 coating and IN792 superalloy

Xiaoyu Sun, Xiaolong Li, Sheng Guo et al
Materials and Design. Vol. 241
Journal article
2024

Additive manufacturing of high-entropy alloys: Current status and challenges

Mehmet Cagirici, Sheng Guo, Jun Ding et al
Smart Materials in Manufacturing. Vol. 2
Review article
2024

Effect of chemical segregation on accuracy of local lattice distortions determination by pair distribution functions

Yao Hu, Sheng Guo, Magnus Hörnqvist Colliander
AIP Advances. Vol. 14 (11)
Journal article
2024

Diamonds brazing with a novel Cu35Ni35Cr10Fe10Sn10 high-entropy alloy filler

Haifeng Wei, H. Zhang, Dong Xu et al
Journal of the American Ceramic Society. Vol. 107 (10), p. 6985-6998
Journal article
2024

Excellent specific strength-ductility synergy in novel complex concentrated alloy after suction casting

A. R. Balpande, S. Agrawal, Xiaolong Li et al
Materials and Design. Vol. 242
Journal article
2023

The Kondo Effect in Ce<inf>x</inf>LaLuScY (x = 0.05–1.0) High-Entropy Alloys

Julia Petrović, S. Vrtnik, A. Jelen et al
Materials. Vol. 16 (24)
Journal article
2023

Tribo-corrosion resistance of Ti-Nb-Cr-Mo-Al refractory high-entropy alloys in molten aluminum

Xin Yang, Zhiqiang Fu, Weiping Chen et al
Corrosion Science. Vol. 224
Journal article
2023

Editorial: Innovators in structural materials—alloys and metals

Jiangshan Zhang, Sheng Guo, Noé Cheung
Frontiers in Materials. Vol. 10
Other text in scientific journal
2023

A novel L12-strengthened AlCoCuFeNi high-entropy alloy with both high hardness and good corrosion resistance

Yaojia Ren, Hong Wu, Bin Liu et al
Materials Letters. Vol. 331
Journal article
2023

Effect of Fe content on type and distribution of carbides in medium-entropy high-speed steels

Bang Dou, Hui Zhang, Ye Tao et al
Tungsten. Vol. 5 (1), p. 189-197
Journal article
2023

Ageing hardening and corrosion resistance of Fe<inf>60</inf>Cr<inf>18</inf>Cu<inf>3</inf>(MnCoNiMoAlTi)<inf>19</inf> medium-entropy alloy

H. Zhang, Ye Tao, Ben Qi Xu et al
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals. Vol. 33 (8), p. 2622-2634
Journal article
2023

Corrosion behaviour of additively manufactured 316L and CoCrNi

Bala Malladi, Eric Tam, Yu Cao et al
Surface and Interface Analysis. Vol. 55 (6-7), p. 404-410
Journal article
2023

Influence of casting temperature on the castability and glass-forming ability of Zr-based bulk metallic glasses

D. L. Ouyang, Y. H. Yan, S. S. Chen et al
Journal of Non-Crystalline Solids. Vol. 603
Journal article
2022

Laser-based Powder Bed Fusion of dispersion strengthened CoCrNi by ex-situ addition of TiN

Sri Bala Aditya Malladi, Laura Cordova Gonzalez, Sheng Guo et al
Procedia CIRP. Vol. 111, p. 368-372
Paper in proceeding
2022

Electronic transport properties of the Al<inf>0.5</inf>TiZrPdCuNi alloy in the high-entropy alloy and metallic glass forms

Magdalena Wencka, Mitja Krnel, A. Jelen et al
Scientific Reports. Vol. 12 (1), p. 2271-
Journal article
2022

A comparative study on microstructure, nanomechanical and corrosion behaviors of AlCoCuFeNi high entropy alloys fabricated by selective laser melting and laser metal deposition

Yaojia Ren, Hong Wu, Bin Liu et al
Journal of Materials Science and Technology. Vol. 131, p. 221-230
Journal article
2022

Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2. 1 eutectic high-entropy alloy

Adrianna Lozinko, Reza Gholizadeh, Yubin Zhang et al
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. Vol. 833
Journal article
2022

Al 27 NMR local study of the Al0.5TiZrPdCuNi alloy in high-entropy alloy and metallic glass forms

Magdalena Wencka, Matej Bobnar, Tomaž Apih et al
Physical Review B. Vol. 105 (17)
Journal article
2022

Effect of Mo on high-temperature strength of refractory complex concentrated alloys: A perspective of electronegativity difference

Q. Hu, Sheng Guo, J. L. Guo et al
Journal of Alloys and Compounds. Vol. 906
Journal article
2022

Eutectic High-Entropy Alloys

Wenna Jiao, Z. J. Wang, Sheng Guo et al
Materials Horizons: From Nature to Nanomaterials, p. 53-90
Book chapter
2022

Load redistribution in eutectic high entropy alloy AlCoCrFeNi<inf>2.1</inf> during high temperature deformation

Nitesh Raj Jaladurgam, Adrianna Lozinko, Sheng Guo et al
Materialia. Vol. 22
Journal article
2021

Grain refinement in additively manufactured ferritic stainless steel by in situ inoculation using pre-alloyed powder

A. Durga, N. Pettersson, Sri Bala Aditya Malladi et al
Scripta Materialia. Vol. 194
Journal article
2021

Structure and superconductivity of tin-containing hftizrsnm (M = cu, fe, nb, ni) medium-entropy and high-entropy alloys

Darja Gačnik, A. Jelen, Mitja Krnel et al
Materials. Vol. 14 (14)
Journal article
2021

Editorial: Dual-Phase Materials in the Medium and High Entropy Alloy Systems Al-Cr-Fe-Ni and Al-Co-Cr-Fe-Ni

Ulrike Hecht, Sheng Guo, Mark L. Weaver
FRONTIERS IN MATERIALS. Vol. 8
Other text in scientific journal
2021

Design of corrosion-resistant high-entropy alloys through valence electron concentration and new PHACOMP

Hsin Li Liang, Che Wei Tsai, Sheng Guo
Journal of Alloys and Compounds. Vol. 883
Journal article
2021

Novel high entropy alloys as binder in cermets: From design to sintering

E. Prieto, A. Vaz-Romero, J. Gonzalez-Julian et al
International Journal of Refractory Metals and Hard Materials. Vol. 99
Journal article
2020

Alloying effect on the oxidation behavior of a ductile Al0.5Cr0.25Nb0.5Ta0.5Ti1.5 refractory high-entropy alloy

S. Sheikh, L. Gan, A. Ikeda et al
Materials Today Advances. Vol. 7
Journal article
2020

Forming protective alumina scale for ductile refractory high-entropy alloys via aluminizing

Saad Ahmed Sheikh, Lu Gan, Xabier Montero et al
Intermetallics. Vol. 123
Journal article
2020

Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys

Adrianna Lozinko, Yubin Zhang, Oleg V. Mishin et al
Journal of Alloys and Compounds. Vol. 822
Journal article
2020

In Situ Growth of CVD Graphene Directly on Dielectric Surface toward Application

Yibo Dong, Sheng Guo, Huahai Mao et al
ACS Applied Electronic Materials. Vol. 2 (1), p. 238-246
Journal article
2020

Promising properties and future trend of eutectic high entropy alloys

Yiping Lu, Yong Dong, Hui Jiang et al
Scripta Materialia. Vol. 187, p. 202-209
Journal article
2019

The growth of graphene on Ni–Cu alloy thin films at a low temperature and its carbon diffusion mechanism

Y. B. Dong, Sheng Guo, H. H. Mao et al
Nanomaterials. Vol. 9 (11)
Journal article
2019

Balancing Scattering Channels: A Panoscopic Approach toward Zero Temperature Coefficient of Resistance Using High-Entropy Alloys

Samrand Shafeie, Sheng Guo, Paul Erhart et al
Advanced Materials. Vol. 31 (2)
Journal article
2019

Development and homogeneity of microstructure and texture in a lamellar AlCoCrFeNi2.1 eutectic high-entropy alloy severely strained in the warm-deformation regime

S. R. Reddy, Upender Sunkari, A. Lozinko et al
Journal of Materials Research. Vol. 34 (5), p. 687-699
Journal article
2019

Corrosion behavior of Hf0.5 Nb0.5 Ta0.5 Ti1.5 Zr refractory high-entropy in aqueous chloride solutions

Qiongyu Zhou, Saad Ahmed Sheikh, Ping Ou et al
Electrochemistry Communications. Vol. 98, p. 63-68
Journal article
2019

Quantification of microstructure in a eutectic high entropy alloy AlCoCrFeNi2.1

Adrianna Lozinko, Oleg V. Mishin, Tianbo Yu et al
IOP Conference Series: Materials Science and Engineering. Vol. 580 (1)
Paper in proceeding
2019

Microstructure and texture of a severely warm-rolled and annealed AlCoCrFeNi2.1 eutectic high entropy alloy

S. R. Reddy, Upender Sunkari, Adrianna Lozinko et al
Journal of Physics: Conference Series. Vol. 1270 (1)
Paper in proceeding
2019

Microstructural design by severe warm-rolling for tuning mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy

Rajasekhar Reddy Seelam, Upender Sunkari, Adrianna Lozinko et al
Intermetallics. Vol. 114 (nov.)
Journal article
2019

Microstructural, mechanical and electrochemical characterization of TiZrTaHfNb and Ti1.5ZrTa0.5Hf0.5Nb0.5 refractory high-entropy alloys for biomedical applications

Amir Motallebzadeh, Naeimeh Sadat Peighambardoust, Saad Ahmed Sheikh et al
Intermetallics. Vol. 113
Journal article
2019

Engineering heterogeneous microstructure by severe warm-rolling for enhancing strength-ductility synergy in eutectic high entropy alloys

Rajasekhar Reddy Seelam, Shuhei Yoshida, Upender Sunkari et al
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. Vol. 764
Journal article
2019

Nanostructuring with Structural-Compositional Dual Heterogeneities Enhances Strength-Ductility Synergy in Eutectic High Entropy Alloy

S. R. Reddy, S. Yoshida, T. Bhattacharjee et al
Scientific Reports. Vol. 9 (1)
Journal article
2019

Novel laser rapidly solidified medium-entropy high speed steel coatings with enhanced hot wear resistance

Hao Tang, H. Zhang, Liang Chen et al
Journal of Alloys and Compounds. Vol. 772, p. 719-727
Journal article
2018

Secondary hardening in laser rapidly solidified Fe-68(MoWCrVCoNiAlCu)(32) medium-entropy high-speed steel coatings

Hui Zhang, Bang Dou, Hao Tang et al
Materials and Design. Vol. 159, p. 224-231
Journal article
2018

Preparing bulk ultrafine-microstructure high-entropy alloys: Via direct solidification

Yiping Lu, Xiaoxia Gao, Yong Dong et al
Nanoscale. Vol. 10 (4), p. 1912-1919
Journal article
2018

Preface- Materials Chemistry and Physics

Jienwei Yeh, Jean Philippe Couzinié, Kefu Yao et al
Materials Chemistry and Physics. Vol. 210, p. 1-1
Other text in scientific journal
2018

Invar effect of Fe-based bulk metallic glasses

Q. Hu, J. M. Wang, Y. H. Yan et al
Intermetallics. Vol. 93, p. 318-322
Journal article
2018

Novel high-entropy and medium-entropy stainless steels with enhanced mechanical and anti-corrosion properties

H. Zhang, H. Tang, W. H. Li et al
Materials Science and Technology. Vol. 34 (5), p. 572-579
Journal article
2018

Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy

T. Bhattacharjee, Ruixiao Zheng, Yan Chong et al
Materials Chemistry and Physics. Vol. 210, p. 207-212
Journal article
2018

Strain-path controlled microstructure, texture and hardness evolution in cryo-deformed AlCoCrFeNi2.1 eutectic high entropy alloy

A. Patel, I. S. Wani, S. R. Reddy et al
Intermetallics. Vol. 97, p. 12-21
Journal article
2018

Accelerated oxidation in ductile refractory high-entropy alloys

Saad Ahmed Sheikh, Muhammad Kurnia Bijaksana, Amir Motallebzadeh et al
Intermetallics. Vol. 97, p. 58-66
Journal article
2018

Anomalous thermal expansion in the deep super-cooled liquid region of a ZrCuAlAg bulk metallic glass

Q. Hu, J. M. Wang, Y. H. Yan et al
Materials Research Letters. Vol. 6 (2), p. 121-129
Journal article
2018

Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing

T. Bhattacharjee, I. S. Wani, Saad Ahmed Sheikh et al
Scientific Reports. Vol. 8 (1)
Journal article
2018

Magnetism of CoCrFeNiZrx eutectic high-entropy alloys

S. Vrtnik, Sheng Guo, Saad Ahmed Sheikh et al
Intermetallics. Vol. 93, p. 122-133
Journal article
2018

Aluminizing for enhanced oxidation resistance of ductile refractory high-entropy alloys

Saad Ahmed Sheikh, Lu Gan, Te Kang Tsao et al
Intermetallics. Vol. 103, p. 40-51
Journal article
2018

Processing of a new high entropy alloy: AlCrFeMoNiTi

E. Prieto, Raquel De Oro Calderon, Thomas Konegger et al
Powder Metallurgy. Vol. 61 (3), p. 258-265
Journal article
2018

Mechanistic insights into the transformation processes in Z-phase strengthened 12% Cr steels

Masoud Rashidi, Ardeshir Golpayegani, Saad Ahmed Sheikh et al
Materials and Design. Vol. 158, p. 237-247
Journal article
2017

Predicting solid solubility in CoCrFeNiMx (M=4d transition metal) high-entropy alloys

Saad Ahmed Sheikh, H. H. Mao, Sheng Guo
Journal of Applied Physics. Vol. 121 (19), p. Article Number: 194903-
Journal article
2017

Effect of severe cold-rolling and annealing on microstructure and mechanical properties of AlCoCrFeNi 2.1 eutectic high entropy alloy

I. S. Wani, T. Bhattacharjee, Saad Ahmed Sheikh et al
IOP Conference Series: Materials Science and Engineering. Vol. 194 (1)
Paper in proceeding
2017

Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range

Yiping Lu, Xuzhou Gao, Li Jiang et al
Acta Materialia. Vol. 124, p. 143-150
Journal article
2017

Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy

I. S. Wani, T. Bhattacharjee, Saad Ahmed Sheikh et al
Intermetallics. Vol. 84, p. 42-51
Journal article
2017

Effect of High Configuration Entropy and Rare Earth Addition on Boride Precipitation and Mechanical Properties of Multi-principal-Element Alloys

H. Zhang, X. C. Zhong, Y. Z. He et al
Journal of Materials Engineering and Performance. Vol. 26 (8), p. 3750-3755
Journal article
2017

A new strategy to design eutectic high-entropy alloys using mixing enthalpy

Yiping Lu, Hui Jiang, Sheng Guo et al
Intermetallics. Vol. 91, p. 124-128
Journal article
2016

Phase formation rules

Yong Zhang, Sheng Guo, C. T. Liu et al
High-Entropy Alloys: Fundamentals and Applications, p. 21-49
Book chapter
2016

Design and development of a new high entropy alloy by powder metallurgy

E. Prieto, Saad Ahmed Sheikh, Sheng Guo et al
World Powder Metallurgy 2016 Congress and Exhibition, World PM 2016; Hamburg; Germany; 9 October 2016 through 13 October 2016
Paper in proceeding
2016

Formation of core-shell structure in high entropy alloy coating by laser cladding

H. Zhang, W. F. Wu, Y. Z. He et al
Applied Surface Science. Vol. 363, p. 543-547
Journal article
2016

Effect of heat treatment on microstructure and mechanical properties of spark plasma sintered AlCoCrFeNiTi0.5 high entropy alloy

I. Moravcik, J. Cizek, P. Gavendova et al
Materials Letters. Vol. 174, p. 53-56
Journal article
2016

Alloy design for intrinsically ductile refractory high-entropy alloys

Saad Ahmed Sheikh, Samrand Shafeie, Q. Hu et al
Journal of Applied Physics. Vol. 120 (16), p. Art no 164902-
Journal article
2016

Ultrafine-Grained AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

I. S. Wani, T. Bhattacharjee, Saad Ahmed Sheikh et al
Materials Research Letters. Vol. 4 (3), p. 174-179
Journal article
2016

Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing

I. S. Wani, T. Bhattacharjee, Saad Ahmed Sheikh et al
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. Vol. 675, p. 99-109
Journal article
2015

Liquid phase separation and the aging effect on mechanical and electrical properties of laser rapidly solidified cu100−xCrx Alloys

S.H. Si, H. Zhang, Y. Z. He et al
Metals. Vol. 5 (4), p. 2119-2127
Journal article
2015

High-entropy alloys as high-temperature thermoelectric materials

Samrand Shafeie, Sheng Guo, Q. Hu et al
Journal of Applied Physics. Vol. 118 (18)
Journal article
2015

Phase selection rules for cast high entropy alloys: an overview

Sheng Guo
Materials Science and Technology. Vol. 31 (10), p. 1223-1230
Journal article
2015

Predicting the solid solubility limit in high-entropy alloys using the molecular orbital approach

Saad Ahmed Sheikh, Uta Klement, Sheng Guo
Journal of Applied Physics. Vol. 118 (19)
Journal article
2015

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl0.5 high-entropy alloy

X. Xu, P. Liu, Sheng Guo et al
Acta Materialia. Vol. 84, p. 145-152
Journal article
2014

Phase stability and tensile properties of Co-free Al 0.5CrCuFeNi2 high-entropy alloys

C Ng, Sheng Guo, J. Luan et al
Journal of Alloys and Compounds. Vol. 584, p. 530-537
Journal article
2014

Nanoindentation characterized initial creep behavior of a high-entropy-based alloy CoFeNi

Z. J. Wang, Sheng Guo, Q. Wang et al
Intermetallics. Vol. 53, p. 183-186
Journal article
2014

Thermally stable laser cladded CoCrCuFeNi high-entropy alloy coating with low stacking fault energy

H. Zhang, Y. Z. He, Y. Pan et al
Journal of Alloys and Compounds. Vol. 600, p. 210-214
Other text in scientific journal
2014

Application Prospects and Microstructural Features in Laser-Induced Rapidly Solidified High-Entropy Alloys

H. Zhang, Y. Pan, Y. He et al
JOM. Vol. 66 (10), p. 2057-2066
Review article
2014

A promising new class of high-temperature alloys: Eutectic high-entropy alloys

Y. Lu, Y. Dong, Sheng Guo et al
Scientific Reports. Vol. 4, p. 6200-
Journal article
2014

Phase Selection in High-Entropy Alloys: From Nonequilibrium to Equilibrium

Z. J. Wang, Sheng Guo, C.T. Liu
JOM. Vol. 66 (10), p. 1966-1972
Journal article
2014

Solid solutioning in equiatomic alloys: Limit set by topological instability

Sheng Guo, C Ng, Z. Wang et al
Journal of Alloys and Compounds. Vol. 583, p. 410-413
Other text in scientific journal
2013

Anomalous solidification microstructures in Co-free AlxCrCuFeNi2 high-entropy alloys

Sheng Guo, C Ng, C. T. Liu
Journal of Alloys and Compounds. Vol. 557, p. 77-81
Journal article
2013

Sunflower-like Solidification Microstructure in a Near-eutectic High-entropy Alloy

Sheng Guo, C Ng, C. T. Liu
Materials Research Letters. Vol. 1 (4), p. 228-232
Journal article
2013

More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase

Sheng Guo, Q. Hu, C Ng et al
Intermetallics. Vol. 41, p. 96-103
Journal article
2012

Estimation of critical cooling rates for formation of amorphous alloys from critical sizes

Sheng Guo, Y. Liu
Journal of Non-Crystalline Solids. Vol. 358 (20), p. 2753-2758
Journal article
2012

Entropy-driven phase stability and slow diffusion kinetics in an Al0.5CoCrCuFeNi high entropy alloy

C Ng, Sheng Guo, J. H. Luan et al
Intermetallics. Vol. 31, p. 165-172
Journal article
2012

Influence of Aging and Thermomechanical Treatments on the Mechanical Properties of a Nanocluster-Strengthened Ferritic Steel

Z. W. Zhang, C. T. Liu, Y. R. Wen et al
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Vol. 43A (1), p. 351-359
Journal article
2011

Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase

Sheng Guo, C. T. Liu
Progress in Natural Science: Materials International. Vol. 21 (6), p. 433-446
Journal article
2011

High resolution optical microprobe investigation of surface grinding stresses in Al2O3 and Al2O3/SiC nanocomposites

Sheng Guo, A. Limpichaipanit, R. I. Todd
Journal of the European Ceramic Society. Vol. 31 (1-2), p. 97-109
Journal article
2011

Boron effects on the ductility of a nano-cluster-strengthened ferritic steel

Z. W. Zhang, C. T. Liu, Sheng Guo et al
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. Vol. 528 (3), p. 855-859
Journal article
2011

Cooling rate effect on Young's modulus and hardness of a Zr-based metallic glass

Z. Y. Liu, Y. Yang, Sheng Guo et al
Journal of Alloys and Compounds. Vol. 509 (7), p. 3269-3273
Journal article
2011

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys

Sheng Guo, C Ng, J. Lu et al
Journal of Applied Physics. Vol. 109 (10)
Journal article
2011

Micromechanical characterization of casting-induced inhomogeneity in an Al0.8CoCrCuFeNi high-entropy alloy

Z. Y. Liu, Sheng Guo, X. J. Liu et al
Scripta Materialia. Vol. 64 (9), p. 868-871
Journal article
2010

Cr3+ microspectroscopy measurements and modelling of local variations in surface grinding stresses in polycrystalline alumina

Sheng Guo, R. I. Todd
Journal of the European Ceramic Society. Vol. 30 (12), p. 2533-2545
Journal article
2010

New glass forming ability criterion derived from cooling consideration

Sheng Guo, C. T. Liu
Intermetallics. Vol. 18 (11), p. 2065-2068
Journal article
2010

Confocal fluorescence microscopy in alumina-based ceramics: Where does the signal come from?

Sheng Guo, R. I. Todd
Journal of the European Ceramic Society. Vol. 30 (3), p. 641-648
Journal article
2010

Identify the best glass forming ability criterion

Sheng Guo, Z. P. Lu, C. T. Liu
Intermetallics. Vol. 18 (5), p. 883-888
Journal article
2009

Cooling Rate Calculation of Non-Equilibrium Aluminum Alloy Powders Prepared by Gas Atomization

S. W. He, Y. Liu, Sheng Guo
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. Vol. 38, p. 353-356
Journal article
2005

Microstructural evolution of Al-Ni-Y powders an with different sizes

Y. Liu, Sheng Guo, Z. M. Liu et al
Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. Vol. 96 (1), p. 83-88
Journal article
2005

Amorphous and nanocrystalline Al82Ni10Y8 alloy powder prepared by gas atomization

Y. Liu, Z. M. Liu, Sheng Guo et al
Intermetallics. Vol. 13 (3-4), p. 393-398
Journal article

Download publication list

You can download this list to your computer.

Filter and download publication list

As logged in user (Chalmers employee) you find more export functions in MyResearch.

You may also import these directly to Zotero or Mendeley by using a browser plugin. These are found herer:

Zotero Connector
Mendeley Web Importer

The service SwePub offers export of contents from Research in other formats, such as Harvard and Oxford in .RIS, BibTex and RefWorks format.

Showing 11 research projects

2024–2027

High-Temperature Thermal Energy Storage for Better Utilization of Renewable Energy (HOTBOX)

Sheng Guo Materials and manufacture
Swedish Research Council (VR)

2023–2026

Multi-property Compositionally Complex Magnets for Advanced Energy Applications (CocoMag)

Sheng Guo Materials and manufacture
European Commission (EC)

2021–2024

Controllable development of micro/nano-structure additively manufactured medical high-entropy alloys and their in vivo and in vitro osteogenesis

Sheng Guo Materials and manufacture
The Swedish Foundation for International Cooperation in Research and Higher Education (STINT)

2020–2024

Ductile and Oxidation Resistant Ultrahigh-Temperature Materials

Sheng Guo Materials and manufacture
Xiaolong Li Materials and manufacture
Swedish Research Council (VR)

4 publications exist
2018–2021

Developing Superior Ultrahigh-Temperature Alloys than Superalloys (SUTA)

Sheng Guo Materials and manufacture
ÅForsk

1 publication exists
2018–2021

Alloy development for High Temperature applications using high entropy concept, II

Sheng Guo Materials and manufacture
VINNOVA

2017–2018

Materials Development and Biomedical Applications of High-Entropy Alloys

Sheng Guo Materials and manufacture
The Swedish Foundation for International Cooperation in Research and Higher Education (STINT)

2016–2020

Eutectic high entropy alloys: a promising new class of high temperature alloys

Sheng Guo Materials and manufacture
Adrianna Lozinko Materials and manufacture
Swedish Research Council (VR)

6 publications exist
2015–2017

Development of Novel Lightweight High-Temperature Materials

Sheng Guo Materials and manufacture
Region Västra Götaland

2015–2016

Materials Development and Mechanistic Studying of a New Class of Advanced Metallic Materials

Sheng Guo Surface and Microstructure Engineering
The Swedish Foundation for International Cooperation in Research and Higher Education (STINT)

2014–2015

High Entropy Alloy Laser Coatings (HEALCOAT)

Sheng Guo Surface and Microstructure Engineering
VINNOVA

There might be more projects where Sheng Guo participates, but you have to be logged in as a Chalmers employee to see them.