Tomas Engström

Showing 212 publications

2014

The Same Problem, the Same Approach to Solve and the Different Target for Solution – Toyota and Volvo Uddevalla

Hikari Nohara, Uich Asao, Eishi Fujita et al
Conference contribution
2013

Assembly Systems and Work in the Swedish Automotive Industry

Bo Blomquist, Tomas Engström, Dan Jonsson et al
Nordic Lights. Work, Management, and Welfare in Scandinavia, p. 225-254
Book chapter
2010

Arbetsplatsrapport av genomförd enkätundersökning vid Volvo Atlet AB i Mölnlycke

Bo Blomquist, Tomas Engström, Margareta Oudhuis
Report
2010

Arbetsplatsrapport enkätundersökning vid Volvo Buss i Borås

Bo Blomquist, Tomas Engström, Margareta Oudhuis
Report
2008

Alternativ montering

Tomas Engström, Dan Jonsson, Lars Medbo
Chukyo Keiei Kenkyu (academic japanese journal). Vol. 18 (1), p. 73 - 153
Journal article
2006

Increasing the Degree of Automation in a Production System: Consequences for the physical workload

I. Balogh, K. Ohlsson, G. A. Hansson et al
International Journal of Industrial Ergonomics. Vol. 36 (4), p. 353 - 365
Journal article
2005

Alternativ montering – Principer och erfarenheter från fordonsindustrin

Tomas Engström, Dan Jonsson, Lars Medbo
Book
2005

Utvärdering av Volvo Lastvagnars monteringsfabrik för hyttillverkning i Umeå

Bo Blomquist, Tomas Engström, Edberg Kerstin et al
Preprint
2004

Perspectives on Changes in the Swedish Model for Work Life Development

Tomas Engström, Dan Jonsson, Lars Medbo
Conference contribution
2004

Reconstructing the History of the Main Volvo Tuve Plant: Some general trends, reasons and consequences for different assembly system designs

Tomas Engström, Bo Blomquist, Ove Holmstrom
International Journal of Operations and Production Management. Vol. 24 (8), p. 820-839
Journal article
2004

Some Considerations Relating to the Reintroduction of Assembly Lines in Swedish Automotive Industry

Dan Jonsson, Lars Medbo, Tomas Engström
International Journal of Operations and Production Management. Vol. 24 (8), p. 754 - 772
Journal article
2003

Linking of User (Tenant) Demands to the (Physical) Building Facility

Tomas Engström, Lars Göran Bergqvist, Jan-Erik Gasslander
Technology, health care, and management in the hospital of the future / edited by Eliezer Geisler, Koos Krabbendam, Roel Schuring, p. 179-197
Book chapter
2003

Technical and Human Aspects of Welding work – Efficiency and ergonomics of two workstations

Kerstina. Ohlsson, Tomas Engström, Gert-Åke Hansson et al
Conference contribution
2002

The Change of Principles for Structuring Assembly Work. A suggestion based on the experiences of Volvo Uddevalla plant

Tomas Engström, Dan Jonsson, Lars Medbo
I E Review. Vol. 41 (3), p. 77 - 84
Journal article
2002

An article in Japanese which we cannot possible understand

Tomas Engström, Dan Jonsson, Lars Medbo
Other
2002

A Method for Evaluation of Manual Work Using Synchronised Video Recordings and Physiological Measurements

Mikael Forsman, Gert-Åke Hansson, Lars Medbo et al
Applied Ergonomics. Vol. 33 (6), p. 533 - 540
Journal article
2002

Assembly Work Structuring Based on Restructuring and Transformation of Product Information

Tomas Engström, Dan Jonsson, Lars Medbo
Journal of Humanities and social sciences, Nagoya City University; Nagoya (translated into japanese). Vol. 12, p. 279 - 309
Magazine article
2002

The “Health Care Product’s” Infliction on the Network of Health Care Service

Jan-Erik Gasslander, Tomas Engström, Åke Wiklund
Conference contribution
2002

Proposal of a Master Plan for the Hospital of the Future” by Means of a Modulation of the Health Care Product

Jan-Erik Gasslander, Tomas Engström, Åke Wiklund
Conference contribution
2001

Guidelines for Coupling of the Building Facilities to the External and Internal Demands Generated by the Society

Tomas Engström, Lars Göran Bergqvist, Jan-Erik Gasslander
Conference contribution
2001

The Interface Between Production System Design and Individual Mechanical Exposure

Nils. F. Pettersson, Zandin Kjell, S.-E. Mathiassen et al
Maynard’s Industrial Engineering Handbook’, 5th Edition, Zandin, K., ed., p. 6.99-6.109
Edited book
2001

Alternative Product Structures and Product Variant Codification: Experiences from reforming the assembly line – possibilities for physical and administrative modularisation

Tomas Engström, Lars Medbo
The CoCKEAS workshop New Principles of Productive Organisation: Innovation and Modular Production , GATE, Université Lumière Lyon 2, Lyon 15-16 March 2001
Magazine article
2001

Brukarmedverkan vid planering-, bygg- och förvaltningsprocesser inom högskoleväsendet - Några erfarenheter, paralleller och reflektioner

Tomas Engström, Lars Göran Bergqvist, Jan-Erik Gasslander et al
Arbete människa miljö (1), p. 41 - 61
Journal article
2001

Principer och metoder för information- och arbetsstrukturering”

Tomas Engström, Lars Medbo
Användarperspektivet. Strategier för att förstärka samspel mellan användare och utvecklare, Olsson, B (ed.), Sveriges Innovationsmyndighet, VINNOVA, Vinnova rapporter Vr 2001:18,, p. 37 - 44
Book chapter
2001

Illuminating and Analysing the Performance of the Defunct Volvo Uddevalla plant

Tomas Engström, Lars Medbo
Conference contribution
2000

ANNIE, a Tool for Integrating Ergonomics in the Design of Car Interiors

Lars Hanson, G. Adreoni, A. Lundin et al
SAE Transactions – Journal of Materials and Manufacturing. Technical Paper 1999-01-3372. Reprinted From: Proceedings of the 1999 SAE Southern Automotive Manufacturing., p. 1-11
Paper in proceedings
2000

The Method of Successive Assembly System Design: Six cases studies within the Swedish automotive industry

Tomas Engström, A Gunarsekaran, Dan Jonsson et al
Agile Manufacturing: 21st Century Manufacturing Strategy, Gunarsekaran A. (ed.), Elsevier Science Publishers, p. 621-642
Book chapter
2000

Utvärdering av kundanpassad arbetstid vid Volvo Lastvagnar i Tuve

Tomas Engström, Bo Blomquist
Report
1999

Evaluation of Manual Work by Synchronising Video-recordings and Physiological Measurements

Mikael Forsman, Tomas Engström, Gert-Åke Hansson et al
Conference contribution
1999

Sense of Coherence and Ill Health Among the Unemployed and Re-employed After Closure of an Assembly Plant

Jan Johansson Hanse, Tomas Engström
Work and Stress. Vol. 13 (3), p. 204-222
Journal article
1999

Technical and Human Aspects of Welding Work - Analysis of Efficiency and Ergonomics of Two Work Stations

Tomas Engström, Gert-Åke Hansson, Therese Möller et al
Conference contribution
1999

Annie, a Tool for Integrating Ergonomics in the Design of Car Interiors

Lars Hansson, Roland Axelsson, G Adreoni et al
Conference contribution
1999

Implication of the Design of Materials Flow Subsystem: Some illustrations

Tomas Engström, Dan Jonsson
TRILOG-Europe End Report. TNO-report TNO Inro. Delff, Netherlands
Book chapter
1999

Cycle Time Variation in an Ergonomic and Production Efficiency Context

Steve Kihlberg, Tomas Engström, Svend-Erik Mathiassen et al
Conference contribution
1999

A Swedish industrial research program 'Co-operative for Optimization of industrial production systems regarding Productivity and Ergonomics' (COPE)

Jörgen Winkel, Marita Christmansson, Henrik Cyren et al
American Journal of Industrial Medicine. Vol. Supplement 1, p. 82-85
Journal article
1999

Unemployment and Associations with Sense of Coherence and Ill Health

Thomas Sandberg, Jan Johansson Hanse, Tomas Engström
International Research Conference on Health Hazards and Challenges in the New Working Life, p. 5-
Paper in proceedings
1999

Developments in Assembly System Design: The Volvo Experience

Tomas Engström, Yannic Lung, Dan Jonsson et al
Coping with Variety: Flexible Production Systems for Product Variety in the Automobile Industry; Lung, Y., Chanaron, J. J., Fujimoto, T. and Raff, D. (eds.); Ashgate, Aldershot, p. 192 - 223
Edited book
1999

Några reflektioner om tvär- respektive mångvetenskap”. Arbete människa miljö

Tomas Engström, Ohlsson Kerstina, Staffan Skerfving
Arbete människa miljö & Nordisk Ergonomi (1), p. 4 - 13
Magazine article
1999

Den monteringsrelaterade produktbeskrivningen – En förutsättning för effektiv montering

Tomas Engström, Dan Jonsson, Lars Medbo
Designjournalen. Vol. 6 (1), p. 42 - 49
Magazine article
1998

Task Specific Exposure Information as a Basis for Production System Design

Henrik Cyrén, Marita Christmansson, Tomas Engström et al
Conference contribution
1998

Variability in Skin Exposure in Machine Operators Exposed to Cutting Fluids

Ola Wassenius, Bengt Järvholm, Tomas Engström et al
Scandinavian Journal of Work, Environment and Health. Vol. 24 (2), p. 125 - 129
Journal article
1998

Mannequin Properties Desired for Ergonomic Evaluation of Car Interiors

Lars Hansson, K Holmqvist, S Sjölander et al
Conference contribution
1998

Eye and Body Movements Characterized by Synchronized Sampling

Lars Hansson, K Holmqvist, S Sjölander et al
Conference contribution
1998

The Volvo Uddevalla Plant and Interpretations of Industrial Design Processes

Tomas Engström, Dan Jonsson, Lars Medbo
Integrated Manufacturing Systems. Vol. 9 (5), p. 279 - 295
Journal article
1998

Principer och realiteter – Projekteringen av Volvos bilfabrik i Uddevalla

Kajsa Ellegård, Tomas Engström, Lennart Nilsson
Edited book
1997

Automotive Industry

Tomas Engström, Dag Brune, Dan Jonsson et al
The Workplace – Major industries and occupations, Vol. 2, Brune, D., Gerhardsson, G., Crockford, G. W. and Norbäck, D. (eds.), International Occupational Safety and Health Information Centre (CIS), International Labour Office Geneva, Scandinavian Science Publisher, Oslo,, p. 548-565
Book chapter
1997

Developing Unique Production and Work Structuring Principles Trough a Creative Search and Learning Process: The Uddevalla Final Assembly Plant

Kajsa Ellegård, Tomas Engström, Dan Jonsson
Enquiry on Emerging Patterns of Qualification and Learning in Modern Manufacturing Industries, Eurotecnet, the Commission of European Communities, p. 130 - 148
Book chapter
1997

Finns det möjligheter att integrera ergonomiska aspekter vid utformningen av produktionssystem genom ett tvär- och mångvetenskapligt samarbete?

Tomas Engström, Jan Johansson Hanse, Lars Medbo
Arbete Människa Miljö & Nordisk Ergonomi. Vol. 4, p. 212 - 220
Magazine article
1997

Work and Work Place Design Using Empirical Shoop Floor Information and Virtual Reality Techniques

Davies Roy, Lars Medbo, Tomas Engström et al
Conference contribution
1997

Data Collection and Analysis of Manual Work Using Video Recording and Personal Computer Techniques

Tomas Engström, Per Medbo
International Journal of Industrial Ergonomics. Vol. 19, p. 291-298
Journal article
1997

Production Models and Social Contexts

Dan Jonsson, Tomas Engström, Lars Medbo
Conference contribution
1997

Successive Assembly System Design Based on disassembly of Products

Tomas Engström, Dan Jonsson, Lars Medbo
Conference contribution
1996

Production Model Discourse and Experiences from the Swedish Automotive Industry

Tomas Engström, Dan Jonsson, Lars Medbo
International Journal of Operations and Production Management. Vol. 16 (2), p. 141 - 158
Journal article
1996

Alternatives to Line Assembly: Some Swedish examples

Tomas Engström, Dan Jonsson, Bertil Johansson
International Journal of Industrial Ergonomics. Vol. 17, p. 235-245
Journal article
1996

Work Organization, Ergonomics and Musculosketal Symptoms Among Workers Performing Long Cycle Time Assembly Work

Tomas Engström, Jan Johansson Hanse, Roland Kadefors
Conference contribution
1996

Ergonomics in Parallelized Car Assembly: A Case Study with References Also to Productivity Aspects

Roland Kadefors, Tomas Engström, Jan Petzäll et al
Applied Ergonomics. Vol. 27 (2), p. 101 - 110
Journal article
1996

Analysis of Relationship Between Dermal Contact with Fluids and Machine Operator Productivity

Ola Wassenius, Linnea Lillienberg, Bengt Järvholm et al
Conference contribution
1995

Production System Design – A brief summarisation of some Swedish efforts

Tomas Engström, Åke Sandberg, Lars Medbo
Perspectives on Volvo´s Uddevalla plant as an alternative to Lean production, Sandberg, Å. (ed.), Avebury, Aldershot,, p. 61 - 73
Edited book
1995

Två utvecklingslinjer för integrerade materialflöden

Tomas Engström, Mats Johansson, Dan Jonsson
KFB Kommuniké
Magazine article
1995

Kalmar, Uddevalla and Beyond: Volvos factories of the future

Tomas Engström, Dan Jonsson, Lars Medbo
Conference contribution
1995

Inter-Relation Between Product Variant Codification and Assembly Work for Flexible Manufacturing in Autonomous Group

Tomas Engström, Dan Jonsson, Per Medbo et al
Journal of Materials Processing Technology. Vol. 52, p. 133 - 140
Journal article
1995

Finns det en skandinavisk produktionsmodell?

Tomas Engström, Mats Johansson, Dan Jonsson
KFB Kommuniké (3), p. 12 - 14
Magazine article
1995

Empirical Evaluation of the Reformed Assembly Work at the Volvo Uddevalla Plant. Psychosocial effects and performance aspects

Tomas Engström, Jan Johansson Hanse, Dan Jonsson et al
International Journal of Industrial Ergonomics (16), p. 293-308
Journal article
1994

Intra–group Work Patterns in Final Assembly of Motor Vehicles

Tomas Engström, Lars Medbo
International Journal of Operations & Production Management. Vol. 14 (3), p. 101 - 113
Journal article
1994

Performance of Industrial Buildings – Pilot study in Bilprovningen plant Aröd

Ekström O, Kajsa Ellegård, Tomas Engström et al
Report
1994

Layout Planning and Work Structuring Methods for Parallelized Flow Assembly Work

Tomas Engström, Bertil Johansson
Conference contribution
1994

Design Assumptions and Empirical Evidence Concerning Parallellized Long Work-Cycle Assembly

Tomas Engström, Dan Jonsson, Bertil Johansson
Conference contribution
1994

Finns det en vidareutveckling av Volvos Uddevallafabrik?

Tomas Engström, Lars Medbo
Conference contribution
1994

Extended Work Cycle Assembly - A crucial learning experience

Tomas Engström, Lars Medbo, Dan Jonsson
The International journal of human factors in manufacturing. Vol. 4 (3), p. 293-303
Journal article
1994

Finns det en specifik svensk produktionsmodell

Tomas Engström, Bertil Johansson
Conference contribution
1994

Development of Assembly Competence in Parallelized Flow Assembly Systems

Tomas Engström, Dan Jonsson, Lars Medbo
Conference contribution
1994

Alternativ till det löpande bandet – Produktions principer i Volvos slutmonteringsfabrik i Uddevalla

Tomas Engström
Arbetsmiljödagar 1994, Program och skriftliga sammanfattningar, Dahlner, B. (ed.), Arbetsmiljöinstitutet, AI, Stockholm
Magazine article
1994

La reforme du Travail Industriel Principes et Realites de la Planification d´Usine de Montage d´Automobiles Volvo a Uddevalla

Kajsa Ellegård, Tomas Engström, Lennart Nilsson
Permanent Group for the Study of Automobile Industry and its Employees, Universite d´Évry-Val d´Éssonne – Centre de Rechearches Historiques, the International Network Gerpisa, Paris
Magazine article
1994

Produktionssystem som tar människan till utgångspunkt vid förnyelse av teknik

Kajsa Ellegård, Tomas Engström, Bertil Johansson et al
Nordisk Ergonomi i forskning och praksis (3), p. 2 - 7
Magazine article
1993

An Assembly-Oriented Product Description System as a Precondition for Efficient Manufacturing with Long Cycle Time Work

Tomas Engström, Lars Medbo, Dan Jonsson
Productivity & Quality Management Frontiers – IV, Proceedings of the Fourth International Conference on Productivity & Quality Research, Miami, Vol. 2, Suthmanth, D. J., Edosomwan, J. A., Poupart, R. and Sink, D. S. (eds.), Industrial Engineering and Management Press, Norcross, Georgia (453 – 462)
Paper in proceedings
1993

Produktionssystem som tar människan till utgångspunkt vid förnyelse av teknik

Kajsa Ellegård, Tomas Engström, Mats Johansson et al
Nordisk Ergonomi i forskning och praksis (3), p. 2-7
Magazine article
1993

Some Important Principles and Findings Concerning Long Cycle Time Assembly Work

Tomas Engström, Lars Medbo
Conference contribution
1993

Intra–group Work Patterns in Final Assembly of Motor Vehicles

Tomas Engström, Lars Medbo
Conference contribution
1993

Principles of Perception and Structuring of Long Cycle Time Assembly Work

Tomas Engström, Dan Jonsson
Conference contribution
1993

Reorganisation of Material Flow for Natural Grouped Assembly Work – Some principles and results from action research

Tomas Engström
International Journal of Technology Management. Vol. 8 (3/4), p. 384 - 395
Journal article
1993

Naturally Grouped Assembly Work and New Product Structures

Tomas Engström, Lars Medbo
International Journal of Technology Management. Vol. 7 (4/5), p. 302 - 313
Journal article
1993

Design Criteria and Production Principles for Parallelized Flow Assembly Work

Tomas Engström, Lars Medbo
Conference contribution
1993

Method Aspects on Multi–level Interactive Work Process Mapping

Henrik Brynzér, Tomas Engström, Lars Medbo
Conference contribution
1993

Musculoskeletal Symptoms, Ergonomic Aspects and Psychosocial Factors in Two Different Truck Assembly Concepts

Jan Johansson Hanse, Roland Kadefors, Sigvard Rubenowitz et al
International Journal of Industrial Ergonomics. Vol. 12 (1-2), p. 35-48
Journal article
1993

Evaluation Methods for Assembly Work and Product Design in Radically Different Production Systems: Results from case studies and action research in Swedish industry

Tomas Engström, Anders Lundberg, Lars Medbo
Productivity & Quality Management Frontiers – IV, Proceedings 4th Int. Conference on Productivity & Quality Research, Miami; Suthmanth, D. J., Edosomwan, J. A., Poupart, R. and Sink, D. S. (eds.), Industrial Engineering and Management Press, Norcross, Georgia. Vol. 2, p. 333 - 342
Paper in proceedings
1993

Produktionsätt för framtiden

Kajsa Ellegård, Tomas Engström, Lennart Nilsson
Göteborgsposten 21 april 1993
Magazine article
1992

Principles and Promises of Reflective Production

Tomas Engström, Dan Jonsson, Lars Medbo
Conference contribution
1992

Some Findings from Learning of Assembly Work in Sweden

Tomas Engström, Dan Jonsson, Ulf Karlsson
Conference contribution
1992

Reflective Production in the Final Assembly of Motor Vehicles - An Emerging Swedish Challenge

Kajsa Ellegård, Tomas Engström, Mats Johansson et al
International Journal of Operations and Production Management. Vol. 12 (7/8), p. 117-133
Journal article
1992

Preconditions for Long Cycle Time Assembly and Its Management – Some Findings

Tomas Engström, Lars Medbo
International Journal of Operations and Production Management. Vol. 12 (7/8), p. 134-146
Journal article
1992

Produktionsteknisk dimension i förändring av monteringsarbete. Nordisk Ergonomi i Forskning och Praktik

Tomas Engström, Lars Medbo
Nordisk Ergonomi i Forskning och Praktik. Nordiska Ergonomisällskapet (4), p. 4 - 5
Magazine article
1992

Material Flow Patterns, Product Variants and Long Cycle Time Assembly

Tomas Engström, Lars Medbo
Conference contribution
1992

Design Analysis by Means of Axonometric Hand–drawn Illustrations

Tomas Engström, Mikael Hedin, Lars Medbo
Conference contribution
1992

Musculoskeletal Complaints, Ergonomic Aspects and Psychosocial Factors in Two Different Truck Assembly Concepts

Tomas Engström, Jan Johansson Hanse, Mats Johansson et al
Conference contribution
1992

Materialflödesmönster och effektivitet vid serieproduktion – Förutsättningar för utveckling av det svenska monteringsarbetet

Tomas Engström, Johansson Bertil, Lars Medbo
Arbete människa miljö (4), p. 197 - 208
Magazine article
1992

The Possibilities of Lean Production – A comparison between different product flow concepts in the automotive industry

Kajsa Ellegård, Tomas Engström, Mats Johansson et al
Conference contribution
1992

Reflektiv produktion – Industriell verksamhet i förnyelse

Kajsa Ellegård, Tomas Engström, Johansson Bertil et al
Book
1991

Produktionsteknisk, psykosocial och belastningsergonomisk studie av Produktionsarbetsplatser

Roland Kadefors, Sigvard Rubenowitz, Jan Johansson Hanse et al
Report
1991

Management and Preconditions for Long Cycle Time Assembly: Some Findings

Tomas Engström, Lars Medbo
Conference contribution
1991

Future Assembly Work – Natural Grouping

Tomas Engström
Conference contribution
1990

Förstudie SKF

Tomas Engström, Håkan Sporrong
Report
1990

Naturligt grupperat arbete vid Volvo Lastvagnar – Slutrapport

D Danhäll, Tomas Engström, Mikael Hedin et al
Report
1990

Ombyggnad Torslanda

Bertil Ahlsén, K Dahlström, Tomas Engström et al
Report
1990

Förändring av industriell praxis till funktionella förebilder

Tomas Engström
Arbetsliv i utveckling – Om forskarstött förändringsarbete, Arbetsvetenskapliga Kollegiet i Göteborg. Göteborg, sid 25 - 37
Book chapter
1990

Material Flow Analysis, Sociotechnology and Natural Grouped Assembly Work for Automobiles and Trucks

Tomas Engström, Lars Medbo
Research and Development in Work and Technology, Proceedings of a European Workshop, Dortmund, Porsnschlegel, H. (ed.), Physica Verlag, Heidelberg,, p. 219 - 242
Paper in proceedings
1990

System och komponenter i en lastvagn

Tomas Engström
Report
1989

Equipment Needs in Material Flow Systems - A Study of Load Modules in Integrated Transport Systems

Tomas Engström, Mats Johansson, Anders Lundberg et al
Transport policy, management & technology towards 2001 - Selected proceedings from the 5th WCTR Conference, p. 507-520
Paper in proceedings
1989

Naturligt grupperat arbete vid Volvo Lastvagnar – Förstudie

Tomas Engström, Mikael Hedin, Lars Medbo et al
Report
1989

Naturligt grupperat arbete vid Volvo Lastvagnar – Delrapport 1

D Danhäll, Tomas Engström, Mikael Hedin et al
Report
1989

Equipment Needs in Material Flow Systems as a Function of Integration Level – A study of load modules in integrated transportsystems

Tomas Engström, Mats Johansson, Anders Lundberg et al
Proceedings of 5:th World Concerence on Transport Tesearch, Yokohama
Paper in proceedings
1989

Naturligt grupperat arbete vid Volvo Lastvagnar – Delrapport 2

D Danhäll, Tomas Engström, Mikael Hedin et al
Report
1989

Principer och realiteter – Projekteringen av Volvos bilfabrik i Uddevalla

Kajsa Ellegård, Tomas Engström, Lennart Nilsson
Book
1989

Förändring av industriell praxis till funktionella förebilder

Tomas Engström
Arbetsliv i utveckling – Om forskarstött förändringsarbete. Arbetsvetenskapliga Kollegiet i Göteborg. Göteborg, p. 25 - 37
Book chapter
1988

Arbete och arbetsmiljö i postens terminaler

Joen Sachs, Tomas Engström, Anders Lundberg et al
Report
1988

Arbete och arbetsmiljö i postens terminaler. Problemanalys och program

Joen Sachs, Tomas Engström, Anders Lundberg et al
Report
1988

Illustrationer av funktionella grupper och monteringsfaser

Tomas Engström, Lars Medbo
Report
1988

Monteringsanvisningar för naturligt grupperat arbete

Tomas Engström, Lars Medbo, Klas Thunberg
Report
1987

Flödesmönster i serieproduktion

Tomas Engström
Essäsamling, Arbetsmiljöfonden, Arbetsmiljöfonden (AMFO)
Magazine article
1987

System och komponenter i en personvagn

Tomas Engström
Report
1987

Flödesmönster i serieproduktion

Tomas Engström
Essäsamling, Arbetsmiljöfonden (AMFO), Stockholm
Magazine article
1986

Production Planning in the Food Service

Yngve Andersson, Tomas Engström, Ulla Thorsell
Conference contribution
1985

Ergonomiskt utformning av styckningsarbete

Roland Örtengren, Per Hagström, M Magnusson et al
Report
1985

Ergonomiskt utformning av styckningsarbete

Andesson D, Dahlqvist P, Tomas Engström et al
Report
1985

Ergonomics in Meat-Cutting II, Investigation of Physical Worl-Load and Efficiency in Different Systems for Materials Handling

Tomas Engström, Per Hagström, Magnusson Marrianne et al
Ergonomics International, Proceedings of the Ninth Congress of the International Ergonomics Association, Brown, I. D., Goldsmith, R., Combes, K. and Sinclair, M. A. (eds.), Bournemouth, p. 250 - 252
Magazine article
1984

Effektiv småbåtsproduktion. Delrapport

Tomas Engström, Ulf Karlsson, Anders Lundberg et al
Report
1984

Materialhantering i storkök. Slutrapport

Tomas Engström, Björn Sallén
Report
1984

Bilreparationer

Ulf Karlsson, Tomas Engström, Sven Åke Hörte et al
Report
1984

Ergonomiskt utformning av styckningsarbete

Tomas Engström, Per Hagström
Report
1984

Effektiv småbåtsproduktion. Slutrapport

Tomas Engström, Karlsson Ulf, Lundberg Anders et al
Report
1984

Produktionsteknik för ekonomer och beteendevetare

Tomas Engström, Jean Bollinder, Ulf Karlsson
Edited book
1984

Effektiv småbåtsproduktion. Delrapport

Tomas Engström, Ulf Karlsson, Anders Lundberg et al
Report
1984

Materialhantering i storkök. Delrapport

Tomas Engström, Björn Sallén
Report
1983

Framtida produktionssystem

Tomas Engström, Christian Berggren
Report
1982

Influence of Automobile Design on Production System

Christian Bergren, Tomas Engström
Conference contribution
1981

Visualisering av materialhantering

Tomas Engström, Mats Johansson
Other
1981

Alternative Production System to Assembly Line – A problem concerning material supply

Tomas Engström, Ulf Karlsson
Conference contribution
1981

Alternativ montering

Tomas Engström, Ulf Karlsson
Report
1979

Isbrytning med svävarfarkoster

Molnar Andreas, Blide Göran, Tomas Engström et al
Report
1978

Naturgas i Sverige

Andreas Molnar, Tomas Engström, Jonas Grufman et al
Report
1978

Blomatic. Ett alternativ

Hans-Åke Pettersson, Tommy Marklund, Tomas Engström
Report
1977

Bedömning av basidé till nytt materialhanteringssystem

Thomas Ottosson, Tomas Engström, Stefan Nedestam
Report
1977

Bedömning av basidé till nytt materialhanteringssystem

Ottosson Thomas, Tomas Engström, Nedestam Stefan
Report
1976

Jordbrukets utomgårds transporter

Thomas Ottosson, N A Elllisson, Tomas Engström et al
Report

Save references

If you have installed Zotero or Mendeley on your computer you can use a plugin to extract references from the publications you see.

Download plugins:
Zotero
Mendeley

There are no projects.
There might be more projects where Tomas Engström participates, but you have to be logged in as a Chalmers employee to see them.