Mario Plos

Showing 113 publications

2022

Pre-study of Dynamic Amplification Factor for Existing Road Bridges

Christoffer Svedholm, Viktor Eriksson, Mario Plos et al
Report - Chalmers University of Technology
2019

A multi-level strategy for successively improved structural analysis of existing concrete bridges: examination using a prestressed concrete bridge tested to failure

Niklas Bagge, Mario Plos, Cosmin Popescu
Structure and Infrastructure Engineering. Vol. 15 (1), p. 27-53
Journal article
2019

Crack widths in portal frame bridges subjected to restraint effects

E. Gottsäter, O. Larsson, Mario Plos
20th Congress of IABSE, New York City 2019: The Evolving Metropolis - Report, p. 1101-1105
Paper in proceeding
2019

Distribution of shear force: A multi-level assessment of a cantilever RC slab

Jiangpeng Shu, Mario Plos, Kamyab Zandi et al
Engineering Structures. Vol. 190, p. 345-359
Journal article
2019

Crack widths in base restrained walls subjected to restraint loading

E. Gottsäter, Morgan Johansson, Mario Plos et al
Engineering Structures. Vol. 189, p. 272-285
Journal article
2019

Integrated project team performance in early design stages – performance indicators influencing effectiveness in bridge design

Daniel P T Ekström, Rasmus Rempling, Mario Plos
Architectural Engineering and Design Management. Vol. 15 (4), p. 249-266
Journal article
2019

Assessment of a cantilever bridge deck slab using multi-level assessment strategy and decision support framework

Jiangpeng Shu, Daniel Honfi, Mario Plos et al
Engineering Structures. Vol. 200
Journal article
2018

Shear Capacity of a RC Bridge Deck Slab: Comparison between Multilevel Assessment and Field Test

Jiangpeng Shu, Niklas Bagge, Mario Plos et al
Journal of Structural Engineering. Vol. 144 (7)
Journal article
2018

Validation of Temperature Simulations in a Portal Frame Bridge

E. Gottsäter, Oskar Larsson Ivanov, M. Molnár et al
Structures. Vol. 15, p. 341-348
Journal article
2018

Measurements and simulation of temperature in a portal frame bridge

E. Gottsäter, O. Ivanov, M. Molnár et al
IABSE Symposium, Nantes 2018: Tomorrow's Megastructures, p. S24-9-S24-16
Paper in proceeding
2017

Comparison of Models for the Design of Portal Frame Bridges with Regard to Restraint Forces

E. Gottsäter, O. Ivanov, R. Crocetti et al
Structures Congress 2017, Denver, United States, 6-8 April 2017, p. 326-339
Paper in proceeding
2017

Internal force distribution in RC slabs subjected to punching shear

Jiangpeng Shu, Beatrice Belletti, Aurelio Muttoni et al
Engineering Structures. Vol. 153, p. 766-781
Journal article
2017

Multi-level Assessment of a Field Tested RC Bridge Deck Slab

Jiangpeng Shu, Mario Plos, Kamyab Zandi
XXIII Nordic Concrete Research Symposium, p. 453-456
Paper in proceeding
2017

Decision support for maintenance and upgrading of existing bridges

Daniel Honfi, John Leander, Ivar Björnsson et al
IABSE Conference, Vancouver 2017: Engineering the Future - Report, p. 336-345
Paper in proceeding
2017

A multi-level structural assessment strategy for reinforced concrete bridge deck slabs

Mario Plos, Jiangpeng Shu, Kamyab Zandi et al
Structure and Infrastructure Engineering. Vol. 13 (2), p. 223-241
Journal article
2017

Methodology for selection of production method in an early stage - improved conceptual design process

Mats Karlsson, Rasmus Rempling, Kent Gylltoft et al
IABSE Conference, Vancouver 2017: Engineering the Future - Report, p. 1879-1886
Paper in proceeding
2017

Simulation of thermal load distribution in portal frame bridges

E. Gottsäter, Oskar Larsson Ivanov, M. Molnár et al
Engineering Structures. Vol. 143, p. 219-231
Journal article
2017

Punching/Shear Strength of a Full-scale Tested Bridge Deck Slab

Jiangpeng Shu, Mario Plos, Kamyab Zandi et al
IABSE Conference, Vancouver 2017: Engineering the Future - Report, p. 1750-1757
Paper in proceeding
2016

Shear force distribution in rc slabs subjected to punching: Solid nonlinear fe anlayses

Jiangpeng Shu, Mario Plos, Kamyab Zandi et al
fib Symposium, p. 1-9
Paper in proceeding
2016

Prediction of punching behaviour of RC slabs using continuum nonlinear FE analysis

Jiangpeng Shu, Mario Plos, Kamyab Zandi et al
IABSE Congress Stockholm, 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, p. 1629-1636
Paper in proceeding
2016

Numerical prediction of punching behavior of RC slabs using 3D non-linear FE analysis

Jiangpeng Shu, Mario Plos, Kamyab Zandi et al
Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks - Proceedings of the 8th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2016, p. 1607-1611
Paper in proceeding
2016

Evaluation of safety formats for non-linear finite element analyses of statically indeterminate concrete structures subjected to different load paths

Mattias Blomfors, M. Engen, Mario Plos
Structural Concrete. Vol. 17 (1), p. 44-51
Journal article
2016

Prediction of punching behaviour of RC slabs using continuum non-linear FE analysis

Jiangpeng Shu, Mario Plos, Kamyab Zandi et al
Engineering Structures. Vol. 125, p. 15-25
Journal article
2016

Shear Force Distribution in RC Slabs Subjected To Punching: Solid Nonlinear FE Analyses

Jiangpeng Shu, Mario Plos, Kamyab Zandi et al
fib Symposium 2016, Cape Town (p. 55-58). Cape Town, South Africa.
Paper in proceeding
2016

Spalling in concrete subjected to shock wave blast

Jonas Ekström, Rasmus Rempling, Mario Plos
Engineering Structures. Vol. 122, p. 72-82
Journal article
2016

A multi-level structural assessment strategy for analysis of RC bridge deck slabs

Mario Plos, Jiangpeng Shu, Karin Lundgren et al
19th IABSE Congress Stockholm (pp. 1559–1566). Stockholm, Sweden, p. 1564-1571
Paper in proceeding
2016

Simulation of thermal load distribution in portal frame bridges

E. Gottsäter, O. Larsson, M. Molnár et al
IABSE Congress Stockholm, 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment
Paper in proceeding
2016

Recommendations for finite element analysis for design of reinforced concrete bridges

Mario Plos, C. Pacoste, Filip Nilenius
19th IABSE Congress Stockholm 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016, p. 2038-2041
Paper in proceeding
2016

Integrated project teams in early design stages - Key variables influencing cost effectiveness in bridge building

Daniel P T Ekström, Rasmus Rempling, Peter Simonsson et al
19th IABSE Congress Stockholm, 21-23 September 2016, Challenges in Design and Construction of an Innovative and Sustainable Built Environment, p. 598-606
Paper in proceeding
2015

A Multi-levelStructural Assessment Proposal for Reinforced Concrete Bridge Deck Slabs

Jiangpeng Shu, Mario Plos, Kamyab Zandi et al
Nordic Concrete Research: Residual Capacity of Deteriorated Concrete Structures (pp. 53-56). Oslo, Norway
Paper in proceeding
2015

Tests on Anchorage of Naturally Corroded Reinforcement in Concrete

Karin Lundgren, Mohammad Tahershamsi, Kamyab Zandi et al
Materials and Structures/Materiaux et Constructions. Vol. 48 (7), p. 2009-2022
Journal article
2015

Punching Capacity of a Reinforced Concrete Bridge Deck Slab Loaded to Failure

Niklas Bagge, Jiangpeng Shu, Mario Plos et al
Nordic Concrete Research: Residual Capacity of Deteriorated Concrete Structures (pp. 57–60). Oslo, Norway
Paper in proceeding
2015

Industrial bridge construction: Need for a more effective bridge construction process

Daniel P T Ekström, Rasmus Rempling, Mario Plos
The Eighth International Structural Engineering and Construction Conference, Sydney, Australia, November 23-28, 2015, p. 1115-1120
Paper in proceeding
2015

Anchorage of corroded reinforcement – from advanced models to practical applications

Karin Lundgren, Mario Plos, Kamyab Zandi et al
. Extended abstract in “Residual Capacity of Deteriorated Concrete Structures” mini-seminar, 21st of April 2015, Oslo, Norway
Other conference contribution
2015

Development of modelling strategies for two-way RC slabs

Jiangpeng Shu, David Fall, Mario Plos et al
Engineering Structures. Vol. 101, p. 439-449
Journal article
2015

3D Modelling of the bond behavior of naturally corroded reinforced concrete

Karin Lundgren, Mario Plos, Kamyab Zandi et al
Extended abstract in “Residual Capacity of Deteriorated Concrete Structures” mini-seminar, 21st of April 2015, Oslo, Norway
Other conference contribution
2014

Structural Assessment of Bridge Deck Slabs

Jiangpeng Shu, Mario Plos, Karin Lundgren et al
Nordic Concrete Research. Vol. 50, p. 453-456
Paper in proceeding
2014

Assessment of Structural Performance in Naturally Corroded Reinforced Concrete Elements

Mohammad Tahershamsi, Kamyab Zandi, Karin Lundgren et al
Concrete, Materials and Conservation at Structural Faults and Repair 2014
Paper in proceeding
2014

Influence of strain softening on spalling of concrete due to blast load

Jonas Ekström, Rasmus Rempling, Mario Plos
Nordic Concrete Research. Vol. 2/2014 (50)
Paper in proceeding
2014

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

Jiangpeng Shu, David Fall, Mario Plos et al
The 10th fib International PhD Symposium in Civil Engineering, p. 589-594
Paper in proceeding
2014

Samarbetsprojekt för effektivare brobyggande

Daniel P T Ekström, Rasmus Rempling, Mario Plos et al
Bygg & Teknik. Vol. 2014 (7), p. 58-61
Magazine article
2014

Modelling the Bond Behaviour of Naturally Corroded Reinforced Concrete

Mohammad Tahershamsi, Ignasi Fernandez, Kamyab Zandi et al
9th International DIANA Users Meeting. 4/5 November 2014, Parma, Italy
Other conference contribution
2014

Industrial bridge building- An effective bridge construction process through an integrated design and construction process

Daniel P T Ekström, Rasmus Rempling, Mario Plos
Nordic Concrete Research. Vol. 2014 (2), p. 79-82
Paper in proceeding
2014

1D and 3D analysis of anchorage in naturally corroded specimens

Ignasi Fernandez, Mohammad Tahershamsi, Antonio R. Marí et al
Proceedings of the 10th fib International PhD Symposium in Civil Engineering, Université Laval 21 – 23 July 2014, Québec, Canada, p. 547-552
Paper in proceeding
2014

Recommendations for Finite Element Analysis for Design of RC Slabs

Mario Plos, Costin Pacoste, Morgan Johansson
Nordic Concrete Research. Vol. 2014 (2), p. 39-42
Paper in proceeding
2014

Anchorage of naturally corroded bars in reinforced concrete structures

Mohammad Tahershamsi, Kamyab Zandi, Karin Lundgren et al
Magazine of Concrete Research. Vol. 66 (14), p. 729-744
Journal article
2013

Assessment of Anchorage Capacity of Naturally Corroded Reinforcement

Mohammad Tahershamsi, Kamyab Zandi, Karin Lundgren et al
International Association for Bridge and Structural Engineering, IABSE Conference, Assessment, Upgrading and Refurbishment of Infrastructures, 06-08 May 2013, Rotterdam, The Netherlands, p. 556-557
Paper in proceeding
2013

Three-dimensional modelling of structural effects of corroding steel reinforcement in concrete

Kamyab Zandi, Karin Lundgren, Mario Plos et al
Structure and Infrastructure Engineering. Vol. 9 (7), p. 702-718
Journal article
2012

Safety formats for non-linear analysis of concrete structures

Hendrik Schlune, Mario Plos, Kent Gylltoft
Magazine of Concrete Research. Vol. 64 (7), p. 563-574
Journal article
2012

Anchorage Capacity of Naturally Corroded Reinforced Concrete Beams

Mohammad Tahershamsi, Kamyab Zandi, Karin Lundgren et al
Proceeding of the fib Symposium, Concrete Structures for Sustainable Community, 11-14 June 2012, KTH Royal Institute of Technology, Stockholm, Sweden, p. 323-326
Paper in proceeding
2012

Anchorage capacity of naturally corroded reinforcement in an existing bridge

F. Berg, D. Johansson, Karin Lundgren et al
Proceedings of the Sixth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2012, Stresa, Lake Maggiore, 8-12 July 2012, p. 2800-2807
Paper in proceeding
2012

Är förankringskapaciteten tillräcklig i broar med rostande armering?

Karin Lundgren, Mario Plos, Kamyab Zandi et al
Bygg & Teknik. Vol. 104 (7), p. 17-19
Magazine article
2012

Influence of frost on the bond between steel and concrete

Kamyab Zandi, Peter Utgenannt, Karin Lundgren et al
Proceeding of the Fourth International Conference on Bond in Concrete. Vol. 1, p. 483-490
Paper in proceeding
2012

Anchorage in naturally corroded specimens taken from existing structures

Mohammad Tahershamsi, Kamyab Zandi, Karin Lundgren et al
Proceeding of the Fourth International Symposium on Bond in Concrete 2012: Bond, Anchorage, Detailing, Brescia, Italy, 17-20 June 2012, Editors: John w. Cairns, Giovanni Metelli, Giovanni A. Plizzari. Vol. 1, General Aspects of Bond, p. 345-349
Paper in proceeding
2012

Anchorage of corroded bars: eccentric pull-out tests and numerical analysis

Kamyab Zandi, Dario Coronelli, Karin Lundgren et al
Proceeding of the Fourth International Conference on Bond in Concrete. Vol. 1, p. 429-436
Paper in proceeding
2011

A New Safety Format for Nonlinear Analysis

Hendrik Schlune, Mario Plos, Kent Gylltoft et al
Proceeding of XXI Nordic Concrete Research Symposium. Vol. 43 (1/2011), p. 41-44
Paper in proceeding
2011

Comparative study of safety formats for nonlinear finite element analysis of concrete structures

Hendrik Schlune, Mario Plos, Kent Gylltoft
Applications of Statistics and Probability in Civil Engineering -Proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering, Zurich 1 August 2011through4 August 2011, p. 2542-2548
Paper in proceeding
2011

Corroded reinforced concrete structures: effects of high corrosion and corroded stirrups

Kamyab Zandi, Karin Lundgren, Mario Plos et al
Nordic Concrete Research (43), p. 179-182
Paper in proceeding
2011

Safety formats for nonlinear analysis tested on concrete beams subjected to shear forces and bending moments

Hendrik Schlune, Mario Plos, Kent Gylltoft
Engineering Structures. Vol. 33 (8), p. 2350-2356
Journal article
2010

Konstruktionstekniska förutsättningar för industriell brobyggnad

Rasmus Rempling, Kent Gylltoft, Mario Plos et al
Bygg och teknik (7), p. 48-49
Magazine article
2010

Structural engineering potentials and applications for effective industrial bridge construction

Ingvar Olofsson, Kent Gylltoft, Rasmus Rempling et al
Report
2009

Non-linear finite-element analysis of the shear response in prestressed concrete bridges

Helén Broo, Mario Plos, Karin Lundgren et al
Magazine of Concrete Research. Vol. 61 (8), p. 591 -608
Journal article
2009

Uppdatering av FE-modeller med hjälp av fältmätningar

Hendrik Schlune, Mario Plos, Kent Gylltoft
Bygg & teknik. Vol. 7, p. 54-56
Magazine article
2009

Improved bridge evaluation through finite element model updating using static and dynamic measurements

Hendrik Schlune, Mario Plos, Kent Gylltoft
Engineering Structures. Vol. 31 (7), p. 1477-1485
Journal article
2009

Non-linear Finite Element Analysis for Practical Application

Hendrik Schlune, Mario Plos, Kent Gylltoft
Nordic Concrete Research. Vol. 1 (1/2009), p. 75-88
Journal article
2008

Structural assessment of concrete railway bridges

Mario Plos, Kent Gylltoft, Karin Lundgren et al
Bridge Maintenance, Safety, Management, Healt Monitoring and Informatics, p. 705-
Paper in proceeding
2008

Performance Evaluation of Damaged Concrete Bridges

Kamyab Zandi, Karin Lundgren, Per Kettil et al
3rd International Bridge Conference
Paper in proceeding
2008

Structural assessment of concrete bridges

Mario Plos, Kent Gylltoft, Karin Lundgren et al
Nordic Concrete Research. Vol. 38 (2008/2), p. 89-101
Journal article
2008

Finite element model updating of a concrete arch bridge through static and dynamic measurements

Hendrik Schlune, Mario Plos, Kent Gylltoft et al
Proceddings of the Fourth International Conference on Bridge Maintenance, Safety and Management, Seoul, Korea, 13-17 July 2008
Paper in proceeding
2008

Bridge evaluation through finite element analysis and on site measurements

Hendrik Schlune, Mario Plos, Kent Gylltoft
Rroceedings Nordic Concrete Research, Bålsta, Sweden, 2008, p. 70-71
Paper in proceeding
2008

Structural behavior of corroded reinforced concrete structures

Kamyab Zandi, Karin Lundgren, Per Kettil et al
The Fourth International Conference on Bridge Maintenance, Safety, Management, Health Monitoring and Informatics, p. 481-
Paper in proceeding
2008

Guideline for load and resistance assessment of existing European railway bridges

Jens S. Jensen, Mario Plos, Juan R. Casas et al
Bridge Maintenance, Safety, Management, Healt Monitoring and Informatics, p. 708-
Paper in proceeding
2008

Evaluation of load-carrying capacity of damaged reinforced concrete structures

Kamyab Zandi, Karin Lundgren, Mario Plos et al
Nordic Concrete Research & Development, p. 60-
Paper in proceeding
2008

Säkerhetsprinciper för bärighetsanalys av broar med icke-linjära metoder

Fredrik Carlsson, Mario Plos, Bert Norlin et al
Report
2008

Sustainable Bridges: Tillämpning av erfarenheter från ett EU-projekt, slutrapport

Ingvar Olofsson, Jan Olofsson, Mario Plos et al
Report
2007

Structural Assessment of concrete railway bridges

Mario Plos, Kent Gylltoft, Karin Lundgren et al
Sustainable Bridges: Assessment for Future Traffic Demands and Longer Lives, p. 251-260
Paper in proceeding
2007

Structural assessment of concrete bridges

Mario Plos, Kent Gylltoft, Karin Lundgren et al
Nordic Concrete Research. Vol. 30 (2), p. 89-102
Journal article
2007

Simulation of shear-type cracking and failure with non-linear finite element method

Helén Broo, Mario Plos, Karin Lundgren et al
Magazine of Concrete Research. Vol. 59 (9), p. 673-687
Journal article
2007

Guideline for load and resistance assessment of existing European railway bridges

Jens S. Jensen, Juan R. Casas, Raid Karoumi et al
Sustainable Bridges: Assessment for Future Traffic Demands and Longer Lives, p. 221-230
Paper in proceeding
2007

Non-Linear Analysis and Remaining Fatigue Life

Mario Plos, Karin Lundgren, Rasmus Rempling et al
Report
2007

Reinforced and prestressed concrete beams subjected to shear and torsion

Helén Broo, Mario Plos, Karin Lundgren et al
Fracture Mechanics of Concrete and Concrete Structures. Vol. 2, p. 881-888
Paper in proceeding
2006

Development of a guideline for load and resistance assessment of existing European railway bridges

Jens S. Jensen, Clive Melbourne, Juan R. Casas et al
Bridge Maintenance, Safety, Management, Life Cycle Performance and Cost, p. 755-757
Paper in proceeding
2006

Bond behaviour of corroded reinforcing steel bars in concrete

Congqi Fang, Karin Lundgren, Mario Plos et al
Cement and Concrete Research. Vol. 36 (10), p. 1931-1938
Journal article
2006

The effect of corrosion on bond in reinforced concrete

Karin Lundgren, Mario Plos
Proceedings “European Symposium on Service Life and Serviceability of Concrete Structures ESCS-2006, p. 252-257
Paper in proceeding
2006

Modelling the response of the New Svinesund arch bridge: FE model verification and updating based on field measurements

Mario Plos
Bridge Mainenance, Safety, Management, Life Cycle Performance and Cost, p. 221-222
Paper in proceeding
2006

Effect of corrosion on bond in reinforced concrete under cyclic loading

Congqi Fang, Kent Gylltoft, Karin Lundgren et al
Cement and Concrete Research. Vol. 36 (3), p. 548-555
Journal article
2006

Evaluation of Shear Capacity of a Prestressed Concrete Box Girder Bridge using Non-Linear FEM

Mario Plos, Kent Gylltoft
Structural Engineering International: Journal of the International Association for Bridge and Structural Engineering (IABSE). Vol. 16 (3), p. 213-221
Journal article
2006

Sustainable Bridges: Tillämpning av erfarenheter från ett EU-projekt, delrapport 2

Ingvar Olofsson, Mario Plos, Jan Olofsson et al
Report
2006

Structural assessment of concrete railway bridges: Non-linear analysis and remaining fatigue life

Mario Plos, Kent Gylltoft, Karin Lundgren et al
Bridge Maintenance, Safety, Management, Life Cycle Performance and Cost, p. 741-743
Paper in proceeding
2005

Structural Assessment using Non-linear Finite Element Analysis: Evaluation of the Shear Capacity for the Källösund Bridge

Mario Plos, Kent Gylltoft
Nordic Concrete Research. Proceedings Nordic Concrete Research Meeting 2005, Sandefjord, Norway, p. 290-292
Paper in proceeding
2005

Simplified Force and Moment Redistribution in Linear FE Analysis: Analysis and Design of Concrete Slab Bridges

Mario Plos, Cecilia Gillesén
Nordic Concrete Research. Proceeding Nordic Concrete Meeting 2005, Sandefjord, Norway, p. 331-333
Paper in proceeding
2005

FE Analysis of the New Svinesund Bridge: Improved Assessment and Maintenance with Model Updating based on Field Meassurement

Mario Plos
Nordic Concrete Research. Proceedings Nordic Concrete Research Meeting 2005, Sandefjord, Norway, p. 293-295
Paper in proceeding
2004

The effect of corrosion on concrete bridges

Congqi Fang, Karin Lundgren, Mario Plos et al
Bridge Maintenance, Safety, Management and Cost / edited by Eiichi Watanabe, Dan M. Frangopol, Tomoaki Utsunomiya
Paper in proceeding
2004

Analyses of two connected hollow core units

Karin Lundgren, Mario Plos
Report
2004

Analyses of hollow core floors

Karin Lundgren, Mario Plos
Report
2004

Evaluering av bärförmåga hos broar med hjälp av förfinade analysmetoder

Mario Plos, Kent Gylltoft, Joakim Jeppsson et al
Report
2004

Structural assessment of a prestressed box girder concrete bridge, using non-linear finite element analysis

Mario Plos, Kent Gylltoft
Proceedings of the second international conference on Bridge Maintenance, Safety and Management, p. 837-838
Paper in proceeding
2002

Improved Bridge Assessment using Non-linear Finite Element Analyses

Mario Plos
Bridge Maintenance, Safety and Management, p. 133-134
Paper in proceeding
1998

Nonlinear FE Analyses of RC Bridge Frame Corners, Based on Fracture Mechanics

Mario Plos, Kent Gylltoft
Journal of Bridge Engineering. Vol. 3 (4), p. 204-209
Journal article
1995

Fracture Mechanics Analyses of the Shear Behaviour in a Concrete Bridge.

Mario Plos, Kent Gylltoft
Nordic Concrete Research. Vol. 16 (1/1995), p. 83-102
Journal article
1994

Splicing of Reinforcement in Frame Corners: Experimental Studies

Mario Plos, Kent Gylltoft
Nordic Concrete Research. Vol. 14 (1/1994), p. 103-121
Journal article
1990

Full-scale Shear Tests on Modern Highway Concrete Bridges

Mario Plos, Kent Gylltoft, Krister Cederwall
Nordic Concrete Research. Vol. 9 (1990), p. 134-144
Journal article

Download publication list

You can download this list to your computer.

Filter and download publication list

As logged in user (Chalmers employee) you find more export functions in MyResearch.

You may also import these directly to Zotero or Mendeley by using a browser plugin. These are found herer:

Zotero Connector
Mendeley Web Importer

The service SwePub offers export of contents from Research in other formats, such as Harvard and Oxford in .RIS, BibTex and RefWorks format.

Showing 14 research projects

2024–2025

Explosioner i en förtätad stadsmiljö. fortsättning och slutfas - etapp 2

Joosef Leppänen Structural Engineering
Mario Plos Structural Engineering
Morgan Johansson Structural Engineering
Fabio José Lozano Mendoza Structural Engineering
Swedish Civil Contingencies Agency
Swedish Fortifications Agency
Swedish Transport Administration

2021–2022

Kalixbron

Mario Plos Structural Engineering
Swedish Transport Administration

2020–2023

Explosions in a denser urban environment

Joosef Leppänen Structural Engineering
Mario Plos Structural Engineering
Morgan Johansson Structural Engineering
Fabio Lozano Mendoza Structural Engineering
Swedish Civil Contingencies Agency
Swedish Fortifications Agency
Swedish Transport Administration

1 publication exists
2020–2021

Förstudie: Ökad kapacitet för tunga fordon hos befintliga vägbroar - Förfinad modell för att beräkna fordonsdynamiska effekter

Mario Plos Structural Engineering
Mats Karlsson Structural Engineering
Swedish Transport Administration

1 publication exists
2019–2020

Utvärdering, hantering och modellering av tvångslaster i betongbroar - fortsättning

Mario Plos Structural Engineering
Development Fund of the Swedish Construction Industry (SBUF)
Swedish Transport Administration

2018–2020

Projekteringsprocess för ökad hänsyn till produktions­metoder, klimat och miljöpåverkan i byggprocessen

Rasmus Rempling Structural Engineering
Alexandre Mathern Structural Engineering
Kristine Ek Structural Engineering
Mario Plos Structural Engineering
Swedish Transport Administration

8 publications exist
2018–2019

Recommendations for Assessment of Reinforced Concrete Slabs

Mario Plos Structural Engineering
Morgan Johansson Structural Engineering
Kamyab Zandi Structural Engineering
Jiangpeng Shu Structural Engineering
Swedish Transport Administration

1 publication exists
2016–2018

BIG BRO – Decision support for maintenance and upgrading of existing transportation infrastructure based on advanced assessment technologies and structural health monitoring

Kamyab Zandi Structural Engineering
Mario Plos Structural Engineering
Swedish Transport Administration

2015–2018

Utvärdering, hantering och modellering av tvångslaster i betongbroar

Mario Plos Structural Engineering
Development Fund of the Swedish Construction Industry (SBUF)
Swedish Transport Administration

2015–2018

ISEAWIND – Innovative Structural Engineering Approaches for design of off-shore WIND power plant foundations

Mario Plos Structural Engineering
Rasmus Rempling Structural Engineering
Alexandre Mathern Structural Engineering
NCC AB
Swedish Energy Agency

6 publications exist
2014–2017

Relating visual inspection to structural effects of natural corrosion in reinforced concrete structures

Karin Lundgren Civil and Environmental Engineering
Kamyab Zandi Structural Engineering
Mario Plos Structural Engineering
Mohammad Tahershamsi Structural Engineering
Ignasi Fernandez Perez Structural Engineering
Swedish Transport Administration

4 publications exist
2014–2017

Blast and Fragment Impacts: Pre-study of strengthening of structures subjected to impulse loading

Mario Plos Structural Engineering
Morgan Johansson Structural Engineering
Joosef Leppänen Structural Engineering
Kent Gylltoft Structural Engineering
Jonas Ekström Structural Engineering
Rasmus Rempling Structural Engineering
Swedish Civil Contingencies Agency

2 publications exist
2013–2019

Ibridge - Efficient industrial bridge construction by integrating structural design and construction process

Mario Plos Structural Engineering
Daniel P T Ekström Structural Engineering
Rasmus Rempling Structural Engineering
Swedish Transport Administration

6 publications exist
2012–2017

Load Carrying Capacity of Existing Bridge Deck Slabs

Mario Plos Structural Engineering
Karin Lundgren Civil and Environmental Engineering
Kent Gylltoft Structural Engineering
Morgan Johansson Structural Engineering
Filip Nilenius Structural Engineering
Kamyab Zandi Structural Engineering
Jiangpeng Shu Structural Engineering
Swedish Transport Administration

There might be more projects where Mario Plos participates, but you have to be logged in as a Chalmers employee to see them.