Teodora Retegan Vollmer

2024

Reaction Capsule Design for Interaction of Heavy Liquid Metal Coolant, Fuel Cladding, and Simulated JOG Phase at Accident Conditions

2023

Preparation of Chromium doped uranium nitride via Sol-Gel and Carbothermic reduction

2023

A MOOC in Nuclear- and Radio-Chemistry: from the design to the feedback

Massive Online Open Course „Essential Radiochemistry for Society“

2023

Mercury Removal from Concentrated Sulfuric Acid by Electrochemical Alloy Formation on Platinum

2021

Oxidation and hydrolysis of thorium doped uranium nitride fuel for use in LWR

2020

Fuel fabrication and reprocessing issues: the ASGARD project

2020

Global occurrence, chemical properties, and ecological impacts of e-wastes (IUPAC Technical Report)

2020

Application of SPS in the fabrication of UN and (U,Th)N pellets from microspheres

2019

Recovery of Rare-Earth Elements from Neodymium Magnet Waste Using Glycolic, Maleic, and Ascorbic Acids Followed by Solvent Extraction

Thermochemical effect of fission products on sodium – MOX fuel reaction: The case of niobium

2018

Leaching and recovery of rare-earth elements from neodymium magnet waste using organic acids

Foreword

2017

Characterization and Leaching of Neodymium Magnet Waste and Solvent Extraction of the Rare-Earth Elements Using TODGA

2017

Separation of Heavy Rare-Earth Elements from Light Rare-Earth Elements Via Solvent Extraction from a Neodymium Magnet Leachate and the Effects of Diluents

Recovery of indium and yttrium from Flat Panel Display waste using solvent extraction

The solvent extraction of rare earth elements from nitrate media with novel polyamides containing malonamide groups

WEEE recycling: Research, development, and policies

WEER Recycling

Selective separation of yttrium and europium using Cyanex 572 for applications in fluorescent lamp waste processing

Concluding Remarks

A hydrometallurgical process for the recovery of rare earth elements from fluorescent lamp waste fractions

2016

Storage of defective fuel pins in SFR core

Targeting fluorescent lamp waste for the recovery of cerium, lanthanum, europium, gadolinium, terbium and yttrium

Hydrometallurgical Processes for the Recovery of Metals from WEEE

Reclaiming rare earth elements from end-of-life products: A review of the perspectives for urban mining using hydrometallurgical unit operations

Investigations regarding the wet decontamination of fluorescent lamp waste using iodine in potassium iodide solutions

2014

Optimization of Indium Recovery and Separation from LCD Waste by Solvent Extraction with Bis(2-ethylhexyl) Phosphate (D2EHPA)

Feasibility of using solvent extraction for the industrial recovery of rare earth metals contained in fluorescent lamp waste

Characterization and leaching of real fluorescent lamp waste for the recovery of rare earth metals and mercury

Studies on the Solvent Extraction of Rare Earth Metals From Fluorescent Lamp Waste Using Cyanex 923

Hydrometallurgical process for the recycling of indium from waste LCDs

Synthesis and Screening of t-Bu-CyMe4-BTBP, and Comparison with CyMe4-BTBP

Indium recovery from discarded LCD panel glass by solvent extraction

Building a comprehensive nuclear education in Sweden

Human capital needs - Teaching, training and coordination for nuclear fuel cycle

Increasing the sustainability of LCD recycling

2012

Sustainable processes development for recycling of fluorescent phosphorous powders – rare earths and mercury separation: A literature report

P-61: Recycling and re-use of LCD components and materials

A TBP/BTBP-based GANEX Separation Process. Part 1: Feasibility

Thermodynamics of Dissolution for Bis(triazine)-Bipyridine-Class Ligands in Different Diluents and Its Reflection on Extraction

Investigations of Solvent Systems Based on bis-triazine-bipyridine (BTBP) - class Ligands for the Separation of Actinides from Lanthanides

Partitioning and Transmutation Annual Report 2008

Electrospray Ionization Mass Spectrometry Investigation of BTBP - Lanthanide(III) and Actinide(III) Complexes

Radiolysis of solvents containing C5-BTBP: identification of degradation products and their dependence on absorbed dose and dose rate

Influence of dose rate on the radiolytic stability of a BTPB solvent for actinide(III)/lanthanide(III) separation

The Effect of Irradiation on Extraction of Various Metals by C5-BPBP

Partitioning and Transmutation Annual Report 2007

Acomparative study of some BTP and BTBP class ligands

Radiolysis and Ageing of C2-BTP in Cinnamaldehyde/Hexanol mixtures

Effect of Diluents on Extraction of Actinides and Lanthanides

The influence of Diluents and Side Groups of the Ligands on Liquid-Liquid Extraction of Actinides and Lanthanides

Transmutation.Current developments- 2007. A report from Swedish reference group for P&T

An Overview and Historic Look Back at the Solvent Extraction Using Nitrogen Donor Ligands to Extract and Separate An(III) from Ln(III

Extraction of actinides with different 6,60-bis(5,6-dialkyl-[1,2,4]-triazin-3-yl)[2,20]-bipyridines (BTBPs)

The Behaviour of Organic Solvents Containing C5-BTBP and CyMe4-BTBP at Low Irradiation Doses

Extraction behaviour of nickel(II) using some of the BTBP-class ligands

Partitioning and Transmutation Annual Report 2006

Tetradentate ligands for extraction and separation of An(III) and Ln(III): the BTBP-class ligands

Investigations of temperature effects on synergic extraction systems for extraction and separation of trivalent actinides and lanthanides:2-Bromodecanoic acid and 2,2’:6’,2’’-terpyridine.

Partitioning and Transmutation Annual Report 2005

Partitioning and Transmutation Annual Report 2004