Fredrik Normann

2023

Modeling the development of a carbon capture and transportation infrastructure for Swedish industry

2022

Recirculation of NOx and SOx Scrubber Effluent to an Industrial Grate Fired MSW Boiler - Influence on Combustion Performance, Deposition Behavior, and Flue Gas Composition

2022

Integration of CCS in Combined Heat and Power Plants in a City Energy System

2022

The role of energy supply in abatement cost curves for CO2 capture from process industry – a case study of a Swedish refinery

2022

A techno-economic assessment of CO2 capture in biomass and waste-fired combined heat and power plants – A Swedish case study

2022

A multiple system level modeling approach to coupled energy markets: Incentives for combined heat and power generation at the plant, city and regional energy system levels

2022

Flexibility provision by combined heat and power plants – An evaluation of benefits from a plant and system perspective

2022

The role of BECCS in providing negative emissions in Sweden under competing interests for forest-based biomass

2022

Efficient heat integration of industrial CO2 capture and district heating supply

2022

Capture of CO2 from Steam Reformer Flue Gases Using Monoethanolamine: Pilot Plant Validation and Process Design for Partial Capture

2022

Recirculation of NOxand SOxScrubber Effluent to an Industrial Grate Fired MSW Boiler-Influence on Combustion Performance, Deposition Behavior, and Flue Gas Composition

Partial CO2 capture in process industry – a review of aspects to consider for a cost-effective and timely CCS implementation

Policy implications on cost optimal CO2 capture and transportation infrastructure - A case study of Sweden

2021

A Case Study of the Potential for CCS in Swedish Combined Heat and Power Plants

2021

Techno-economic evaluation of co-removal of NOx and SOx species from flue gases via enhanced oxidation of no by ClO2—case studies of implementation at a pulp and paper mill, waste-to-heat plant and a cruise ship

2021

Effect of the oxygen carrier ilmenite on NOX formation in chemical-looping combustion

2021

Supply Chain Driven Commercialisation of Bio Energy Carbon Capture and Storage

Partial capture from refineries through utilization of existing site energy systems

2021

Large-Scale Implementation of Bioenergy With Carbon Capture and Storage in the Swedish Pulp and Paper Industry Involving Biomass Supply at the Regional Level

2021

Integrating CO2 Absorption to a Batch-wise Production Process – A Case Study on a Smelter Plant in Northern Sweden

2021

Integration of Industrial CO2 Capture with Industrial District Heating Networks: A Refinery Case Study

Simultaneous Removal of NOxand SOxfrom Flue Gases Using ClO2: Process Scaling and Modeling Simulations

2020

Marginal Abatement Cost Curve of Industrial CO2 Capture and Storage – A Swedish Case Study

2020

Formation of Soot in Oxygen-Enriched Turbulent Propane Flames at the Technical Scale

2020

Flexible operation of a combined cycle cogeneration plant - A techno-economic assessment

Evaluation of NOx-Reduction Measures for Iron-Ore Rotary Kilns

2020

Combined heat and power operational modes for increased product flexibility in a waste incineration plant

2020

Techno-Economic Assessment of Different Heat Exchangers for CO2 Capture

2020

Efficient utilization of industrial excess heat for carbon capture and district heating

2020

Carbon Allocation in Multi-Product Steel Mills That Co‐process Biogenic and Fossil Feedstocks and Adopt Carbon Capture Utilization and Storage Technologies

Cost Estimation of CO2 Absorption Plants for CO2 Mitigation – Method and Assumptions

Evaluation of Operating and Design Parameters of Pressurized Flue Gas Systems with Integrated Removal of NO x and so x

2019

Scaling of Pulverized-Fuel Jet Flames That Apply Large Amounts of Excess Air - Implications for NOx Formation

2019

Scenario for near-term implementation of partial capture from blast furnace gases in Swedish steel industry

Operation of Carbon-Capture Integrated into Industrial Combined-Heat-and-Power Plants - Dependency on Hourly to Seasonal Load Changes

Technical-Scale Evaluation of Scrubber-Based, Co-Removal of NOx and SOx Species from Flue Gases via Gas-Phase Oxidation

Oxidation of ammonia by iron, manganese and nickel oxides – Implications on NOx formation in chemical-looping combustion

2019

Dynamic modeling for assessment of steam cycle operation in waste-fired combined heat and power plants

2019

Excess heat-driven carbon capture at an integrated steel mill – Considerations for capture cost optimization

2019

Chalmers Industrial Case Study Portfolio - Contents, Structure and Example Applications

Cost Efficient Partial CO2 Capture at an Integrated Iron and Steel Mill

Integrating carbon capture into an industrial combined-heat-and-power plant: performance with hourly and seasonal load changes.

On the nitrogen chemistry in jet and swirled pilot-scale PF flames

NO formation during co-combustion of coal with two thermally treated biomasses

2019

CO2stCap - Reducing the Cost of Carbon Capture in Process Industry

2019

Operational flexibility of combined heat and power plant with steam extraction regulation

Enhancement of CO2 Absorption in Water through pH Control and Carbonic Anhydrase - A Technical Assessment

An assessment of the flexibility of combined heat and power plants in power systems with high shares of intermittent power sources

Gas-Phase Chemistry of the NO-SO2-ClO2 System Applied to Flue Gas Cleaning

Concomitant removal of NOx and SOx from a pressurized oxy-fuel combustion process using a direct contact column

Modeling the Contributions of Volatile and Char-Bound Nitrogen to the Formation of NOx Species in Iron Ore Rotary Kilns

Cost estimation of heat recovery networks for utilization of industrial excess heat for carbon dioxide absorption

Partial Carbon Capture by Absorption Cycle for Reduced Specific Capture Cost

Investment costs and CO2 reduction potential of carbon capture from industrial plants – A Swedish case study

Evaluation of low and high level integration options for carbon capture at an integrated iron and steel mill

Improving the flexibility of coal-fired power generators: Impact on the composition of a cost-optimal electricity system

2018

Evaluation of Steel Mills as Carbon Sinks

The formation of NOx and soot in oxygen-enriched suspension flames

The connection between NOx and soot in oxygen-enriched propane flames

The effect of flue gas recirculation on the formation of alkali- chlorides and sulfates in Oxy-BECCS power plants

Large-scale Torrefaction of waste wood for pulverized-coal substitution in blast furnaces: Torero project

Power plant dynamics with post-combustion CO2 capture - A comparison between a supercritical coal fired and a natural gas combined cycle power plant

First evaluation of a multicomponent flue gas cleaning concept using chlorine dioxide gas - Experiments on chemistry and process performance

Demonstrating load-change transient performance of a commercial-scale natural gas combined cycle power plant with post-combustion CO2 capture

2017

CO2stCap - Cutting Cost of CO2 Capture in Process Industry

Effects of CO2-absorption control strategies on the dynamic performance of a supercritical pulverized-coal-fired power plant

2017

Efficiency Comparison of Large-Scale Standalone, Centralized, and Distributed Thermochemical Biorefineries

Implications of Fuel Choice and Burner Settings for Combustion Efficiency and NOx Formation in PF-Fired Iron Ore Rotary Kilns

2017

Partial Capture of Carbon Dioxide from Industrial Sources - A Discussion on Cost Optimization and the CO2 Capture Rate

Oxidation of ammonia over a copper oxide-containing solid oxygen carrier with oxygen uncoupling capability

The faith of fuel bound nitrogen in a solid fuel chemical looping combustion process over oxygen carriers of ilmenite and Fe2O3 supported on Mg-ZrO2

Reduced Mechanism for Nitrogen and Sulfur Chemistry in Pressurized Flue Gas Systems

Challenges for coal based electricity generation in energy systems with high capacity of variable renewable energy sources

Nitrogen chemistry in rotary kiln flames: Impact of mixing rate and temperature at high air to fuel ratios

Heat extraction from a utility-scale oxy-fuel-fired CFB boiler

Ammonia-based post combustion - The techno-economics of controlling ammonia emissions

Oxidation of Ammonia by Ilmenite under Conditions Relevant to Chemical-Looping Combustion

Post combustion CO2 capture applied to a state-of-the-art coal-fired power plant - the influence of dynamic process conditions

Equilibrium measurements of the NH3-CO2-H2O system - measurement and evaluation of vapor-liquid equilibrium data at low temperatures

Post-combustion CO2 capture using monoethanolamine and ammonia solvents: The influence of the CO2 concentration on the technical performance

Modeling the Nitrogen and Sulfur Chemistry in Pressurized Flue Gas Systems

Formation of nitrogen oxides in rotary kiln burners: an assessment of pilot scale experiments using gaseous, liquid and solid fuels

Formation and Control of NOx and SOx in Pressurized Oxy-Combustion Systems

Reduced Mechanism for Interactions of Nitrogen and Sulfur Chemistry in Pressurized Flue Gas Systems

Heat transfer in a 4 MWth circulating fluidized bed furnace operated under oxy-fired and air-fired conditions: modeling and measurements

The Rate of CO2 Absorption in Ammonia-Implications on Absorber Design

On the liquid phase chemistry in pressurized flue gas cleaning systems: the effect of process design parameters

In-flame reduction of NOx in oxy-propane combustion at high inlet oxygen concentrations: the importance of soot-NOx interactions

2014

Techno-economic Analysis of Carbon Capture at an Aluminum Production Plant – Comparison of Post-combustion Capture Using MEA and Ammonia

Modeling the Alkali Sulfation Chemistry of Biomass and Coal Co-firing in Oxy-fuel Atmospheres

2014

Process evaluation of CO2 capture in three industrial case studies

On the carbon monoxide formation in oxy-fuel combustion-Contribution by homogenous and heterogeneous reactions

Techno-economic evaluation of an ammonia-based post-combustion process integrated with a state-of-the-art coal-fired power plant

2014

Efficient Utilization of Industrial Excess Heat for Post-combustion CO2 Capture: An Oil Refinery Sector Case Study

NOx AND SOx CHEMISTRY IN PRESSURIZED FLUE GAS SYSTEMS: IMPORTANCE FOR CHEMICAL LOOPING COMBUSTION

Progress of Combustion in an Oxy-fuel Circulating Fluidized-Bed Furnace: Measurements and Modeling in a 4 MWth Boiler

Measurement and modeling of sulfur trioxide formation in a flow reactor under post-flame conditions

Carbon Monoxide Formation during Oxy-fuel-Fired Fluidized-Bed Combustion

Gas phase oxidation of SO2 by NO2 in pressurized flue gas systems - an experimental investigation

Carbon Monoxide Formation in Oxy-Fuel Combustion

NORDICCS-CCS in the Nordic region/Pressurized flue gas cleaning in CCS processes

Sulphation of potassium chloride in air and oxy-fuel combustion

2013

Transient Behavior of a Post Combustion CO2 Capture Process

Nitrogen and sulphur chemistry in pressurised flue gas systems: A comparison of modelling and experiments

2013

The effect of oxygen and volatile combustibles on the sulphation of gaseous KCl

Oxy-Fuel Combustion Modeling: Performance of Global Reaction Mechanisms

Heat requirement for regeneration of aqueous ammonia in post-combustion carbon dioxide capture

2011

Heat requirement of CO2 absorption by aqueous ammonia

Reburning of Nitric Oxide in Oxy-Fuel Firing-The Influence of Combustion Conditions

NO2 Emissions in Oxy-Fuel Combustion

Thermal integration and modelling of the chilled ammonia process

SO3 Formation under Oxyfuel Combustion Conditions

NOx reburning in oxy-fuel combustion: A comparison between solid and gaseous fuels

Control of Nitrogen Oxides in Oxy-Fuel Combustion

The Control of Nitrogen Oxides in Oxy-Fuel Combustion

2010

Reburning in oxy-fuel combustion: A parametric study of the combustion chemistry

2010

Oxy-Fuel Combustion - The Control of Nitrogen Oxides

Thermal Integration of the Chilled Ammonia Process

NOX reburning in oxy-fuel combustion - An experimental investigation

Sulphur chemistry in oxy-fuel combustion

The fate of sulphur during oxy-fuel combustion of lignite

Emission control of nitrogen oxides in the oxy-fuel process

Utilization of Reburn Reactions for NOx Control in Oxy-Fuel Combustion

Process analysis of an oxygen lean oxy-fuel power plant with co-production

The Sulphur Mass Balance in Oxy-Fuel Combustion of Lignite

High-temperature reduction of nitrogen oxides in oxy-fuel combustion

2008

Evaluation of Concepts for secondary SOx and NOx Removal from the Oxy-Fuel Process

The Oxy-Fuel Process - Towards high efficient operation

High temperature reduction of nitrogen oxides

NO Emission during Oxy-Fuel Combustion of Lignite

Nitrogen chemistry in a 100kW lignite fired oxy-fuel combustor

Nitrogen Oxides in Oxy-Fuel Combustion

Experiments and modeling on oxy-fuel combustion chemistry during lignite-firing

Oxyfuel power plant with co-production of DME - A bridging technology

CO-COMBUSTION IN AN OXYFUEL POWER PLANT WITH SYNTHESIS GAS PRODUCTION