Mohammad al-Emrani

Professor vid Konstruktionsteknik

Mohammad Al-Emrani är professor på avdelningen för konstruktionsteknik, i forskargruppen Lättviktskonstruktioner, på Chalmers. I sin forskning har han fokuserat huvudsakligen på stålkonstruktioner samt FRP kompositer. Mohammad bedriver idag forskning inom bl. a. utmattning av stålkonstruktioner, tillståndsbedömning samt förstärkning och reperation. Han är medlem i flera nationella och internationella grupper och organisationer, bl. a. TC6-ECCS och IIFC.

Källa: chalmers.se
Image of Mohammad al-Emrani

Visar 119 publikationer

2024

Mean stress effect in high-frequency mechanical impact (HFMI)-treated welded steel railway bridges

Hassan al-Karawi, Poja Shams Hakimi, Hans Pétursson et al
Steel Construction. Vol. 17 (2), p. 81-92
Artikel i vetenskaplig tidskrift
2024

Stainless steel corrugated web girders for composite road bridges: Optimization and parametric studies

Fatima Hlal, Mozhdeh Amani, Mohammad al-Emrani
Engineering Structures. Vol. 302
Artikel i vetenskaplig tidskrift
2024

Load effects in beams with corrugated webs: Numerical study

Fatima Hlal, Mohammad al-Emrani
Nordic Steel Construction Conference 2024
Paper i proceeding
2024

High Frequency Mechanical Impact Treatment - Recommendations for the design of welded details in road and railway bridges

Mohammad al-Emrani, Poja Shams Hakimi, Hassan al-Karawi
Rapport - Institutionen Arkitektur och samhällsbyggnadsteknik (ACE)
2023

Flange buckling in stainless-steel corrugated webs I-girders under pure bending: Numerical study

Fatima Hlal, Mohammad al-Emrani
Journal of Constructional Steel Research. Vol. 208
Artikel i vetenskaplig tidskrift
2023

Development of a unified design buckling curve for fibre reinforced polymer plates subjected to in-plane uniaxial and uniform compression

Erik Olsson, J. Toby Mottram, Mohammad al-Emrani et al
Thin-Walled Structures. Vol. 183
Artikel i vetenskaplig tidskrift
2023

Laser-Welded Corrugated-Core Sandwich Composition—Numerical Modelling Strategy for Structural Analysis

Peter Nilsson, Rasoul Atashipour, Mohammad al-Emrani
Journal of Composites Science. Vol. 7 (9)
Artikel i vetenskaplig tidskrift
2023

An Optimization-Based Case Study of Aluminum Pedestrian Bridge Decks †

Peter Nilsson Strand, Emelie Falkenberg, Markus Fredriksson et al
Engineering Proceedings. Vol. 43 (1)
Artikel i vetenskaplig tidskrift
2023

Shear behavior of stainless steel girders with corrugated webs

Mozhdeh Amani, Mohammad al-Emrani, Mathias Flansbjer
Journal of Constructional Steel Research. Vol. 210
Artikel i vetenskaplig tidskrift
2023

Life Cycle Cost and Life Cycle Assessment of Composite Bridge with Flat and Corrugated Webs

Fatima Hlal, Mozhdeh Amani, Peter Nilsson et al
ce/papers. Vol. 6, p. 574-579
Artikel i vetenskaplig tidskrift
2023

Verification of the Maximum Stresses in Enhanced Welded Details via High-Frequency Mechanical Impact in Road Bridges

Hassan al-Karawi, John Leander, Mohammad al-Emrani
Buildings. Vol. 13 (2)
Artikel i vetenskaplig tidskrift
2022

High-cycle variable amplitude fatigue experiments and design framework for bridge welds with high-frequency mechanical impact treatment

Poja Shams Hakimi, Hassan al-Karawi, Mohammad al-Emrani
Steel Construction. Vol. 15
Artikel i vetenskaplig tidskrift
2022

Preliminary Study on Plate Girders with Corrugated Webs

Fatima Hlal, Mohammad al-Emrani, Mozhdeh Amani
Preprint
2022

Reliability of statically indeterminate timber structures: Modelling approaches and sensitivity study

Dorotea Caprio, Robert Jockwer, Mohammad al-Emrani
Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems, p. 1649-1655
Paper i proceeding
2022

Mean Stress Effect in High-Frequency Mechanical Impact (HFMI)-Treated Steel Road Bridges

Hassan al-Karawi, Poja Shams Hakimi, Mohammad al-Emrani
Buildings. Vol. 12 (5)
Artikel i vetenskaplig tidskrift
2022

Small-scale laterally-unrestrained corrugated web girders: (I) LTB tests and numerical validation

Yu Mei Zhang, M. F. Hassanein, Yong Bo Shao et al
Thin-Walled Structures. Vol. 180
Artikel i vetenskaplig tidskrift
2022

Small-scale laterally-unrestrained corrugated web girders: (II) Parametric studies and LTB design

M. F. Hassanein, Yu Mei Zhang, A. A. Elkawas et al
Thin-Walled Structures. Vol. 180
Artikel i vetenskaplig tidskrift
2021

Assessment of in-service stresses in steel bridges for high-frequency mechanical impact applications

Poja Shams Hakimi, Fredrik Carlsson, Mohammad al-Emrani et al
Engineering Structures. Vol. 241
Artikel i vetenskaplig tidskrift
2021

Fatigue life estimation of treated welded attachments via High Frequency Mechanical Impact treatment (HFMI-treatment)

Hassan al-Karawi, Mohammad al-Emrani, Reza Haghani Dogaheh
Modern Trends in Research on Steel, Aluminium and Composite Structures PROCEEDINGS OF THE XIV INTERNATIONAL CONFERENCE ON METAL STRUCTURES (ICMS2021), POZNAŃ, POLAND, 16-18 JUNE 2021
Kapitel i bok
2021

Fatigue life extension of existing welded structures via high frequency mechanical impact (HFMI) treatment

Hassan al-Karawi, Rüdiger Ulrich Franz von Bock und Polach, Mohammad al-Emrani
Engineering Structures. Vol. 239
Artikel i vetenskaplig tidskrift
2021

Innovative flexural strengthening of RC beams using self-anchored prestressed CFRP plates: Experimental and numerical investigations

Jincheng Yang, Morgan Johansson, Mohammad al-Emrani et al
Engineering Structures. Vol. 243
Artikel i vetenskaplig tidskrift
2021

Crack detection via strain measurements in fatigue testing

Hassan al-Karawi, Rüdiger Ulrich Franz von Bock und Polach, Mohammad al-Emrani
Strain. Vol. 57 (4)
Artikel i vetenskaplig tidskrift
2021

The efficiency of HFMI treatment and TIG remelting for extending the fatigue life of existing welded structures

Hassan al-Karawi, Mohammad al-Emrani
Steel Construction. Vol. 14 (2), p. 95-106
Artikel i vetenskaplig tidskrift
2021

Crack behaviour after High Frequency Mechanical Impact treatment in welded S355 structural steel

Hassan al-Karawi, Mohammad al-Emrani, Joakim Hedegård
Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations Proceedings of the Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020), June 28-July 2, 2020, Sapporo, Japan, p. 3113-3119
Paper i proceeding
2021

Fatigue crack repair by TIG-remelting

Hassan al-Karawi, Asma Manai, Mohammad al-Emrani et al
Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations Proceedings of the Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020), June 28-July 2, 2020, Sapporo, Japan, p. 3120-3127
Paper i proceeding
2020

Robustness of the HFMI techniques and the effect of weld quality on the fatigue life improvement of welded joints

R. Aldén, Z. Barsoum, T. Vouristo et al
Welding in the World, Le Soudage Dans Le Monde. Vol. 64 (11), p. 1947-1956
Artikel i vetenskaplig tidskrift
2020

Fatigue-strength assessment of laser welds in corrugated core steel sandwich panels

Peter Nilsson, Mohammad al-Emrani, Rasoul Atashipour
Journal of Constructional Steel Research. Vol. 164
Artikel i vetenskaplig tidskrift
2020

Fatigue crack repair in welded structures via tungsten inert gas remelting and high frequency mechanical impact

Hassan al-Karawi, R. U.Franz von Bock und Polach, Mohammad al-Emrani
Journal of Constructional Steel Research. Vol. 172
Artikel i vetenskaplig tidskrift
2020

A probabilistic study of welding residual stresses distribution and their contribution to the fatigue life

Asma Manai, Rüdiger Ulrich Franz von Bock und Polach, Mohammad al-Emrani
Engineering Failure Analysis. Vol. 118
Reviewartikel
2019

Innovative prestressing method for externally bonded CFRP laminates without mechanical anchorage

Jincheng Yang, Reza Haghani Dogaheh, Mohammad al-Emrani
Engineering Structures. Vol. 197
Artikel i vetenskaplig tidskrift
2019

The impact of production-dependent geometric properties on fatigue-relevant stresses in laser-welded corrugated core steel sandwich panels

Peter Nilsson, Joakim Hedegård, Mohammad al-Emrani et al
Welding in the World, Le Soudage Dans Le Monde. Vol. 63 (6), p. 1801-1818
Artikel i vetenskaplig tidskrift
2019

Evaluation of HFMI as a Life Extension Technique for Welded Bridge Details

M. Edgren, Zuheir Barsoum, K. Åkerlind et al
Procedia Structural Integrity. Vol. 19, p. 73-80
Paper i proceeding
2019

Fatigue assessment of metallic structures under variable amplitude loading

Asma Manai, Mohammad al-Emrani
Procedia Structural Integrity. Vol. 19, p. 12-18
Paper i proceeding
2018

Fatigue improvement of welded bridge details in stainless steel using high-frequency mechanical impact treatment

Mohammad al-Emrani, Poja Shams Hakimi, C. Schneider et al
Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, p. 446-451
Paper i proceeding
2018

On the strength prediction of adhesively bonded FRP-steel joints using cohesive zone modelling

Mohsen Heshmati, Reza Haghani Dogaheh, Mohammad Al-Emrani et al
Theoretical and Applied Fracture Mechanics. Vol. 93, p. 64-78
Artikel i vetenskaplig tidskrift
2018

Advanced Assessment of Welded Bridges for Fatigue and Brittle Fracture

Farshid Zamiri Akhlaghi, Mohammad Al-Emrani, Robert Kliger
Rapport - Chalmers tekniska högskola AB
2018

Flexural FRP Strengthening of Concrete Bridges Using an Innovative Concept

Jincheng Yang, Reza Haghani Dogaheh, Mohammad Al-Emrani
Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, p. 339-345
Paper i proceeding
2018

Accuracy evaluation of Gamma-method for deflection prediction of partial composite beams

Rasoul Atashipour, Pierre Landel, Mohammad Al-Emrani
2018 World Conference on Timber Engineering (WCTE 2018)
Paper i proceeding
2018

Mathematical analysis of an innovative method for strengthening concrete beams using pre-stressed FRP laminates

Rasoul Atashipour, Jincheng Yang, Reza Haghani Dogaheh et al
Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges: Proceedings of the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), p. 285-293
Paper i proceeding
2018

Experimental study of transverse attachment joints with 40 and 60 mm thick main plates, improved by high-frequency mechanical impact treatment (HFMI)

Poja Shams Hakimi, Farshid Zamiri Akhlaghi, Mohammad Al-Emrani et al
Engineering Structures. Vol. 155, p. 251-266
Artikel i vetenskaplig tidskrift
2017

A realistic model for transverse shear stiffness prediction of composite corrugated-core sandwich elements

Rasoul Atashipour, Mohammad Al-Emrani
International Journal of Solids and Structures. Vol. 129, p. 1-17
Artikel i vetenskaplig tidskrift
2017

Dependency of cohesive laws of a structural adhesive in Mode-I and Mode-II loading on moisture, freeze-thaw cycling, and their synergy

Mohsen Heshmati, Reza Haghani Dogaheh, Mohammad Al-Emrani
Materials and Design. Vol. 122, p. 433-447
Artikel i vetenskaplig tidskrift
2017

Exact Lévy-type solutions for bending of thick laminated orthotropic plates based on 3-D elasticity and shear deformation theories

Rasoul Atashipour, U.A. Girhammar, Mohammad Al-Emrani
Composite Structures. Vol. 163, p. 129-151
Artikel i vetenskaplig tidskrift
2017

Flexural strengthening of reinforced concrete beams using externally bonded FRP laminates prestressed with a new method

Jincheng Yang, Reza Haghani Dogaheh, Mohammad Al-Emrani
4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, SMAR 2017
Paper i proceeding
2017

Transverse shear stiffness of corrugated core steel sandwich panels with dual weld lines

Peter Nilsson, Mohammad Al-Emrani, Rasoul Atashipour
Thin-Walled Structures. Vol. 117, p. 98-112
Artikel i vetenskaplig tidskrift
2017

A numerical approach to the rotational stiffness of stake welds

Peter Nilsson, Mohammad Al-Emrani, Rasoul Atashipour
Proceedings of Eurosteel 2017. Vol. 1 (2-3), p. 489-498
Paper i proceeding
2017

Durability of bonded FRP-to-steel jointsEffects of moisture, de-icing salt solution, temperature and FRP type

Mohsen Heshmati, Reza Haghani Dogaheh, Mohammad Al-Emrani
Composites Part B: Engineering. Vol. 119, p. 153-167
Artikel i vetenskaplig tidskrift
2017

Durability of CFRP/steel joints under cyclic wet-dry and freeze-thaw conditions

Mohsen Heshmati, Reza Haghani Dogaheh, Mohammad Al-Emrani
Composites Part B: Engineering. Vol. 126, p. 211-226
Artikel i vetenskaplig tidskrift
2017

The thickness effect of welded details improved by high-frequency mechanical impact treatment

Poja Shams Hakimi, Halid Yildirim, Mohammad Al-Emrani
International Journal of Fatigue. Vol. 99, p. 111-124
Artikel i vetenskaplig tidskrift
2016

Industrialized light-weight steel bridge concept using corrugated core steel sandwich plates

Peter Nilsson, Mohammad Al-Emrani
19th IABSE Congress Stockholm 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016, p. 564-572
Paper i proceeding
2016

Reliability-based fatigue assessment of steel bridges using LEFM - A sensitivity analysis

John Leander, Mohammad Al-Emrani
International Journal of Fatigue. Vol. 93, p. 82-91
Artikel i vetenskaplig tidskrift
2016

Environmental durability of FRP to steel bonded joints in bridges

Mohsen Heshmati, Reza Haghani Dogaheh, Mohammad Al-Emrani
Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks - Proceedings of the 8th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2016, p. 1335-1342
Paper i proceeding
2016

Fatigue reliability assessment of welded bridge details using probabilistic fracture mechanics

John Leander, Farshid Zamiri Akhlaghi, Mohammad Al-Emrani
19th IABSE Congress Stockholm 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016, p. 238-245
Paper i proceeding
2016

A new method for application of pre-stressed FRP laminates for strengthening of concrete structures

Reza Haghani Dogaheh, Mohammad Al-Emrani
IABSE Congress Stockholm, 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment
Paper i proceeding
2016

Effects of moisture on the long-term performance of adhesively bonded FRP/steel joints used in bridges

Mohsen Heshmati, Reza Haghani Dogaheh, Mohammad Al-Emrani
Composites Part B: Engineering. Vol. 92, p. 447-462
Artikel i vetenskaplig tidskrift
2016

Size effect on the fatigue of High Frequency Mechanical Impact treated welds

Poja Shams Hakimi, Halid Yildirim, Mohammad Al-Emrani
19th IABSE Congress Stockholm, p. 284-291
Paper i proceeding
2016

Improving the performance of bolted joints in composite structures using metal inserts

Valbona Mara, Reza Haghani Dogaheh, Mohammad Al-Emrani
Journal of Composite Materials. Vol. 50 (21), p. 3001-3018
Artikel i vetenskaplig tidskrift
2016

Strain analysis of adhesive joints used to bond FRP laminates to structural steel members

Reza Haghani Dogaheh, Mohammad Al-Emrani
Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks - Proceedings of the 8th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2016, p. 2552-2559
Paper i proceeding
2016

Experimental evaluation of the durability of adhesively bonded CFRP/Steel joints in bridges

Mohsen Heshmati, Reza Haghani Dogaheh, Mohammad Al-Emrani
19th IABSE Congress Stockholm 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016, p. 1580-1587
Paper i proceeding
2015

HYGROTHERMAL DURABILITY OF ADHESIVELY BONDED FRP/STEEL JOINTS

Mohsen Heshmati, Reza Haghani Dogaheh, Mohammad Al-Emrani
Implementing Innovative Ideas in Structural Engineering and Project Management, p. 75-80
Paper i proceeding
2015

Fatigue life improvement of welded bridge details using high frequency mechanical impact (HFMI) treatment

Poja Shams Hakimi, Andrea Mosiello, Konstantinos Kostakakis et al
Heinisuo, M & Mäkinen, J (eds) 2015, The 13th Nordic Steel Construction Conference (NSCC.2015). Tampere University of Technology, Tampere., p. 201-202
Paper i proceeding
2015

Steel-Sandwich Elements in Bridge Applications

Peter Nilsson, Mohammad Al-Emrani, Farshid Zamiri Akhlaghi
Rapport
2015

A new method for strengthening concrete structures using prestressed FRP laminates

Reza Haghani Dogaheh, Mohammad Al-Emrani, Robert Kliger
8th International Structural Engineering and Construction Conference: Implementing Innovative Ideas in Structural Engineering and Project Management, ISEC 2015; Sydney; Australia; 23 November 2015 through 28 November 2015, p. 1153-1158
Paper i proceeding
2015

Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: State of the art

Mohsen Heshmati, Reza Haghani Dogaheh, Mohammad Al-Emrani
Composites Part B: Engineering. Vol. 81, p. 259-275
Artikel i vetenskaplig tidskrift
2014

DESIGN OF FRP/STEEL JOINTS BONDED BY THICK ADHESIVE LAYERS EXPERIMENTAL CHARACHTERIZATION AND NUMERICAL MODELLING USING DAMAGE MECHANICS

Mohsen Heshmati, Mohammad Al-Emrani, Reza Haghani Dogaheh et al
2nd International Conference on Advances in Civil and Structural Engineering (CSE)
Paper i proceeding
2014

Fatigue Design of Steel and Composite Bridges

Mohammad Al-Emrani, Mustafa Aygül
Bok
2014

A novel connection for fibre reinforced polymer bridge decks: Conceptual design and experimental investigation

Valbona Mara, Mohammad Al-Emrani, Reza Haghani Dogaheh
Composite Structures. Vol. 117 (1), p. 83-97
Artikel i vetenskaplig tidskrift
2014

An investigation of distortion-induced fatigue cracking under variable amplitude loading using 3D crack propagation analysis

Mustafa Aygül, Mohammad Al-Emrani, Z. Barsoum et al
Engineering Failure Analysis. Vol. 45, p. 151-163
Artikel i vetenskaplig tidskrift
2014

Investigation of distortion-induced fatigue cracked welded details using 3D crack propagation analysis

Mustafa Aygül, Mohammad Al-Emrani, Z. Barsoum et al
International Journal of Fatigue. Vol. 64, p. 54-66
Artikel i vetenskaplig tidskrift
2014

Post weld treatment - Implementation on bridges with special focus on HFMI

Poja Shams Hakimi, Mohammad Al-Emrani
Rapport
2013

A comparative study of different fatigue failure assessments of welded bridge details

Mustafa Aygül, Mathias Bokesjö, Mohsen Heshmati et al
International Journal of Fatigue. Vol. 49 (0), p. 62-72
Artikel i vetenskaplig tidskrift
2012

Upgrading of an existing concrete-steel bridge using fibre reinforced polymer deck - A feasibility study

Valbona Mara, Mohammad Al-Emrani
6th International Conference on FRP Composites in Civil Engineering, CICE 2012; Rome; Italy; 13 June 2012 through 15 June 2012 (06-136)
Paper i proceeding
2012

Modelling and fatigue life assessment of orthotropic bridge deck details using FEM

Mustafa Aygül, Mohammad Al-Emrani, S. Urushadze
International Journal of Fatigue. Vol. 40, p. 129-142
Artikel i vetenskaplig tidskrift
2012

A new design model for adhesive joints used to bond FRP laminates to steel beams

Reza Haghani Dogaheh, Mohammad Al-Emrani
CICE 2012, Italy
Paper i proceeding
2012

A new design model for adhesive joints used to bond FRP laminates to steel beams - Part A: Background and theory

Reza Haghani Dogaheh, Mohammad Al-Emrani
Construction and Building Materials. Vol. 34, p. 486-493
Artikel i vetenskaplig tidskrift
2012

A new design model for adhesive joints used to bond FRP laminates to steel beams Part B: Experimental verification

Reza Haghani Dogaheh, Mohammad Al-Emrani
Construction and Building Materials. Vol. 30, p. 686-694
Artikel i vetenskaplig tidskrift
2012

Girders with trapezoidally corrugated webs under patch loading

Mohammad Al-Emrani, Bo Edlund, Reza Haghani Dogaheh
Nordic Steel Construction Confrence, p. 107-116
Paper i proceeding
2012

Fatigue design of plated structures using structural hot spot stress approach

Mohsen Heshmati, Mohammad Al-Emrani
Proceedings of the Sixth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2012, Stresa, Lake Maggiore, 8-12 July 2012, p. 3146-3153
Paper i proceeding
2012

Fatigue-Prone Details in Steel Bridges

Reza Haghani Dogaheh, Mohammad Al-Emrani, Mohsen Heshmati
Buildings. Vol. 2 (4), p. 456-476
Artikel i vetenskaplig tidskrift
2012

Design of Adehsive Joints in FRP-Bonded Steel Beams

Reza Haghani Dogaheh, Mohammad Al-Emrani, Robert Kliger
International Journal of Structural Stability and Dynamics. Vol. 12 (1), p. 53-73
Artikel i vetenskaplig tidskrift
2012

Fatigue strength of fillet welds subjected to multi-axial stresses

Mathias Bokesjö, Mohammad Al-Emrani, Thomas Svensson
International Journal of Fatigue. Vol. 44, p. 21-31
Artikel i vetenskaplig tidskrift
2012

Fatigue asessment of weld terminations in welded cover-plate details; A comparison of local approaches

Mohsen Heshmati, Mohammad Al-Emrani, Bo Edlund
Nordic Steel Construction Conference, Oslo, Sept 5-7, 2012, p. 781-790
Paper i proceeding
2012

Upgrading of an Existing Concrete-Steel Bridge Using Fibre Reinforced Polymer Deck – A Feasibility Study

Valbona Mara, Mohammad Al-Emrani, Robert Kliger
FRP Bridges Conference 2012- Conference Proceedings, p. 26-34
Paper i proceeding
2011

Girders with Trapezoidally Corrugated Webs -- Under Patch Loading

Mohammad Al-Emrani, Bo Edlund, Nikolaus Ljungström et al
EUROSTEEL 2011. Vol. 2, p. 620-625
Paper i proceeding
2010

Evaluation of the Fatigue Strength of an Orthotropic Bridge Deck Detail Using Hot Spot Stress Approach

Mustafa Aygül, Mohammad Al-Emrani, Ladislav Frýba et al
Proceedings of the International Conference on Advance in Welding Science & Technology for Construction, Energy & Transportation. Vol. AWST-2010 (AWST-10/63), p. 261-268
Paper i proceeding
2010

Stress distribution in adhesive joints with tapered laminates - Effect of tapering length and material properties

Reza Haghani Dogaheh, Mohammad Al-Emrani, Robert Kliger
Journal of Composite Materials. Vol. 44 (3), p. 287-302
Artikel i vetenskaplig tidskrift
2010

Performance of steel beams strengthened with CFRP laminate - Part 1: Laboratory tests

Dag Linghoff, Mohammad Al-Emrani, Robert Kliger
Composites Part B: Engineering. Vol. 41 (7), p. 509-515
Artikel i vetenskaplig tidskrift
2010

Performance of steel beams strengthened with CFRP laminate - Part 2: FE analyses

Dag Linghoff, Mohammad Al-Emrani
Composites Part B: Engineering. Vol. 41 (7), p. 516-522
Artikel i vetenskaplig tidskrift
2010

Effect of Laminate Tapering on Strain Distribution in Adhesive Joints: Experimental Investigation

Reza Haghani Dogaheh, Mohammad Al-Emrani, Robert Kliger
Journal of Reinforced Plastics and Composites. Vol. 29 (7), p. 972-985
Artikel i vetenskaplig tidskrift
2009

Effects of geometrical modifications on behavior of adhesive joints used to bond CFRP laminates to steel members - experimental investigation

Reza Haghani Dogaheh, Mohammad Al-Emrani, Robert Kliger
Nordic Steel Conference, Sweden
Paper i proceeding
2009

Strengthening Glulam Beams with Steel and Composite Plates

Mohammad Al-Emrani, Reza Haghani Dogaheh, Robert Kliger et al
Proceedings of the 7th International Conference on Composite Science and Technology, Sharjah, UAE
Paper i proceeding
2009

Effect of laminate tapering on strain distribution in adhesive joints: an experimental investigation

Reza Haghani Dogaheh, Mohammad Al-Emrani, Robert Kliger
Proceedings of the 7th International Conferene on Composite Science and Technology, Sharjah, UAE
Paper i proceeding
2009

Timber-framed partition walls and their restraining effect on warp in built-in wall studs - Models for twist

Magnus Bäckström, Mohammad Al-Emrani, Robert Kliger
Construction and Building Materials. Vol. 23 (12), p. 3556-3563
Artikel i vetenskaplig tidskrift
2009

Interfacial stress analysis of geometrically modified adhesive joints in steel beams strengthened with FRP laminates

Reza Haghani Dogaheh, Mohammad Al-Emrani, Robert Kliger
Construction and Building Materials. Vol. 23 (3), p. 1413-1422
Artikel i vetenskaplig tidskrift
2009

Carbon.fibre composites for strengthening steel structures

Dag Linghoff, Reza Haghani Dogaheh, Mohammad Al-Emrani
Thin-Walled Structures. Vol. 47 (10), p. 1048-1058
Artikel i vetenskaplig tidskrift
2008

Strengthening timber with CFRP or steel plates - Short and long-term performance

Robert Kliger, Mohammad Al-Emrani, M. Johansson et al
10th World Conference on Timber Engineering 2008; Miyazaki; Japan; 2 June 2008 through 5 June 2008. Vol. 1, p. 414-421
Paper i proceeding
2008

Anchoring Pre-stressed FRP laminates

Mohammad Al-Emrani, Reza Haghani Dogaheh, Robert Kliger
Patent
2008

Effect of tapering on interfacial stresses in adhesive joints without adhesive fillet

Reza Haghani Dogaheh, Mohammad Al-Emrani, Robert Kliger
Fourth International Conference on FRP Composites in Civil Engineering (CICE 2008)
Paper i proceeding
2007

The effect of plate end tapering on the interfacial stresses in adhesively bonded composite elements

Mohammad Al-Emrani, Reza Haghani Dogaheh, Joakim Höglind et al
The third international conference on structural engineering, mechanics and computation. Cape Town, South Africa, 10-12 September 2007
Paper i proceeding
2007

Strengthening Glulam Beams with Steel and Composite Plates

Robert Kliger, Mohammad Al-Emrani, MARIE JOHANSSON et al
Proceedings of the Asia-Pacific Conference on FRP in Structures (APFIS 2007) Hong Kong, China, 12-14 December. Vol. 1, p. 291-296
Paper i proceeding
2007

Reinforcement of glulam elements subjected to large local compression perpendicular to the grain using self-tapping screws

Roberto Crocetti, Mohammad Al-Emrani, Robert Kliger et al
The third international conference on structural engineering, mechanics and computation. Cape Town, South Africa, 10-12 September 2007
Paper i proceeding
2007

Increased stiffness of timber beams with steel and/or CFRP laminates

MARIE JOHANSSON, Mohammad Al-Emrani, Jobin Jacob et al
Third international conference on structural engineering, mechanics and computation
Paper i proceeding
2007

Strengthening steel structures with bonded CFRP

Dag Linghoff, Mohammad Al-Emrani, Robert Kliger
Advanced Composites in Construction (ACIC 07)
Paper i proceeding
2007

Control of Interfacial Stresses in Beams Strengthened with Prestressed CFRP Laminates

Reza Haghani Dogaheh, Mohammad Al-Emrani, Robert Kliger
Proceedings of the Asia-Pacific Conference on FRP in Structures. Vol. 2, p. 1053-1060
Paper i proceeding
2007

Upgrading of Steel Beams using Composite Materials

Dag Linghoff, Mohammad Al-Emrani
Proceedings of the Asia-Pacific Conference on FRP in Structures (APFIS 2007) Hong Kong, China, 12-14 December. Vol. 2, p. 973-978
Paper i proceeding
2007

Investigation of steel I-beams strengthened with CFRP plate

Dag Linghoff, Mohammad Al-Emrani
International conference "Sustainable Bridges - Assessment for future traffic demands and longer lives"
Paper i proceeding
2006

Strengthening steel beams using bonded Carbon-Fibre-Reinforced-Polymers laminates

Dag Linghoff, Mohammad Al-Emrani, Robert Kliger
3rd International Conference on Bridge Maintenance, Safety and Management - Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost; Porto; Portugal; 16 July 2006 through 19 July 2006, p. 1011-1012
Övrigt konferensbidrag
2006

Analysis of interfacial shear stresses in beams strengthened with bonded prestressed laminates

Mohammad Al-Emrani, Robert Kliger
Composites: Part B - Engineering. Vol. 37, p. 265-272
Artikel i vetenskaplig tidskrift
2006

Experimental and numerical investigation of the behaviour and strength of composite steel-cfrp members

Mohammad Al-Emrani, Robert Kliger
Advances in structural engineering. Vol. 9 (6), p. 29-41
Artikel i vetenskaplig tidskrift
2005

Bonding strength and fracture mechanisms in composite steel-CFRP elements

Mohammad Al-Emrani, Dag Linghoff, Robert Kliger
Bonded behaviour of FRP in Structures (BBFS 2005)
Paper i proceeding
2005

Fatigue performance of stringer to floor-beam connections in riveted railway bridges

Mohammad Al-Emrani
Journal of Bridge Engineering. Vol. 10 (2), p. 179-185
Artikel i vetenskaplig tidskrift
2005

The Behavior, Strength and Fracture Mechanisms in Composite Steel-CFRP Members

Mohammad Al-Emrani, Robert Kliger
International symposium on bond behaviour of FRP in structures, 8-10 December 2005, Hong Kong, China.
Paper i proceeding
2004

Fatigue performance of stringer-to-floor-beam connections in riveted railway bridges

Mohammad Al-Emrani, Björn Åkesson, Robert Kliger
Second International Conference on Bridge naintainace, Afety and Management
Paper i proceeding
2004

Overlooked Secondary Effects in Open-Deck Truss Bridges

Mohammad Al-Emrani, Björn Åkesson, Robert Kliger
Structural Engineering International. Vol. 14 (4)
Artikel i vetenskaplig tidskrift
2003

FE analysis of stringer-to-floor-beam connections in riveted railway bridges

Mohammad Al-Emrani, Robert Kliger
Journal of Constructional Steel Research. Vol. 59 (7), p. 803-818
Artikel i vetenskaplig tidskrift
2002

You have full text access to this content Experimentelle Untersuchung des Ermüdungsverhaltens genieteter Träger

Mohammad Al-Emrani, Björn Åkesson
Stahlbau (2), p. 145-150
Artikel i vetenskaplig tidskrift
2002

Experimentelle untersuchung des ermudungsverhaltens genieteter trager

Mohammad Al-Emrani, Robert Kliger
Stahlbau. Vol. 71 (2), p. 145-150
Artikel i vetenskaplig tidskrift

Ladda ner publikationslistor

Du kan ladda ner denna lista till din dator.

Filtrera och ladda ner publikationslista

Som inloggad användare hittar du ytterligare funktioner i MyResearch.

Du kan även exportera direkt till Zotero eller Mendeley genom webbläsarplugins. Dessa hittar du här:

Zotero Connector
Mendeley Web Importer

Tjänsten SwePub erbjuder uttag av Researchs listor i andra format, till exempel kan du få uttag av publikationer enligt Harvard och Oxford i .RIS, BibTex och RefWorks-format.

Visar 25 forskningsprojekt

2022–2025

Material- & kostnadseffektiva optimerade stålkonstruktioner för lång utmattningslivslängd - LONGLIFE

Mohammad al-Emrani Konstruktionsteknik
VINNOVA

1 publikation finns
2021–2022

Infra LIGHTer Awards

Mohammad al-Emrani Konstruktionsteknik
VINNOVA

2021–2024

LifeExt-2-Implementation

Mohammad al-Emrani Konstruktionsteknik
Hassan al-Karawi Konstruktionsteknik
VINNOVA

6 publikationer finns
2020–2023

Lättviktslösningar för robotiserad produktion av broar och byggnadsverk med stora spännvidder- LIGHTSPAN

Mohammad al-Emrani Konstruktionsteknik
VINNOVA

1 publikation finns
2020–2022

Hållbara underhållsfria broar

Mohammad al-Emrani Konstruktionsteknik
Trafikverket
Outokumpu AB

2020–2022

Rekomendationer för HFMI-behandling av stålbroar - utveckling av dimensioneringsmetoder och tekniska kravspecifikationer

Mohammad al-Emrani Konstruktionsteknik
Hassan al-Karawi Konstruktionsteknik
Trafikverket

11 publikationer finns
2019–2022

Reparation och förstärkning av betongkonstruktioner med korroderad armering

Karin Lundgren Konstruktionsteknik
Mohammad al-Emrani Konstruktionsteknik
Reza Haghani Dogaheh Konstruktionsteknik
Jincheng Yang Konstruktionsteknik
Trafikverket

5 publikationer finns
2019–2022

Hållbara, lättare och underhållsfria brobalkar för stärkt svensk infrastruktur

Mohammad al-Emrani Konstruktionsteknik
VINNOVA

2017–2018

Hållbara infrastrukturlösningar genom ökad användning av rostfritt stål

Mohammad Al-Emrani Konstruktionsteknik
VINNOVA

2017–2019

LifeExt - Livslängdsförlängning för befintliga stålbroar

Mohammad Al-Emrani Konstruktionsteknik
Asma Manai Konstruktionsteknik
Hassan al-Karawi Konstruktionsteknik
Trafikverket
VINNOVA

15 publikationer finns
2015–2018

Framtidens biobaserade byggande och boende

Rasoul Atashipour Konstruktionsteknik
Mohammad Al-Emrani Konstruktionsteknik
VINNOVA

2015–2018

FALCON: Lättviktslösningar i fiberkomposit för framtidens infrastruktur

Reza Haghani Dogaheh Konstruktionsteknik
Mohammad Al-Emrani Konstruktionsteknik
VINNOVA

1 publikation finns
2015–2017

Konkurrenskraftiga stål- och samverkansbroar

Mohammad Al-Emrani Konstruktionsteknik
Poja Shams Hakimi Konstruktionsteknik
Trafikverket

2015–2019

Lägre vikt vid användning av stålsandwichelement i brodäck

Mohammad Al-Emrani Konstruktionsteknik
Peter Nilsson Bygg- och miljöteknik
Rasoul Atashipour Konstruktionsteknik
Statens vegvesen
Trafikverket

1 publikation finns
2015–2018

Hållbarhetsdriven design av utmattningsbelastade stålkonstruktioner

Mohammad Al-Emrani Konstruktionsteknik
Formas

2 publikationer finns
2014–2016

INNODEFAB Innovativa koncept för lättviktskonstruktion och tillverkning av svetsade höghållfasta stålkonstruktioner

Mohammad Al-Emrani Konstruktionsteknik
VINNOVA

2 publikationer finns
2014–2014

Pilot study in laser welded sandwich steel elements

Mohammad Al-Emrani Konstruktionsteknik
Statens vegvesen

2014–2015

Fatigue life prediction by damage tolerance using probalistic fracture mechanics - A feasibility study

Mohammad Al-Emrani Konstruktionsteknik
Farshid Zamiri Akhlaghi Konstruktionsteknik
Trafikverket

2014–2014

Eurokodens påverkan på svetsutformning avseende utmattningshållfasthet

Mohammad Al-Emrani Konstruktionsteknik
Trafikverket

2013–2015

Design och upphandling av FRP broar

Reza Haghani Dogaheh Konstruktionsteknik
Robert Kliger Konstruktionsteknik
Mohammad Al-Emrani Konstruktionsteknik
Trafikverket

2013–2015

Snabb och kostnadseffektiv tillverkning av högprestandakompositer, Fas 3

Mohammad Al-Emrani Konstruktionsteknik
VINNOVA

2011–2013

Låg störning och hållbara tekniker för infrastruktur i urbana miljöer (PANTURA)

Reza Haghani Dogaheh Konstruktionsteknik
Mohammad Al-Emrani Konstruktionsteknik
Robert Kliger Konstruktionsteknik
Rasmus Rempling Konstruktionsteknik
Valbona Mara Konstruktionsteknik
Europeiska kommissionen (EU)

1 publikation finns
Det kan finnas fler projekt där Mohammad al-Emrani medverkar, men du måste vara inloggad som anställd på Chalmers för att kunna se dem.