Ingemar Löfgren

2024

Hållfasthetsutveckling och uttorkning av betong - Test av mätmetodik med sensorer i flera nivåer

2024

Metoder för sprickriskbedömning och -begränsning hos hårdnande betong - En omvärldsanalys och parameterstudie

Strain and Temperature Monitoring in Early-Age Concrete by Distributed Optical Fiber Sensing

2023

Using water vapour and N2 isotherms to unveil effects of SCMs on nanopores and evaluate hydration degree

2023

Comparison of the service life, life-cycle costs and assessment of hybrid and traditional reinforced concrete through a case study of bridge edge beams in Sweden

The need for research and innovation to facilitate upscaling of low-carbon concrete

2023

Analysis of the flexural response of hybrid reinforced concrete beams with localized reinforcement corrosion

2023

Non-destructive test system to monitor hydration and strength development of low CO2 concrete

2022

Real-time monitoring the electrical properties of pastes to map the hydration induced microstructure change in cement-based materials

2022

Klimatförbättrad vattenbyggnadsbetong utan kylbehov

2022

Karbonatisering - En förbisedd koldioxidsänka

2022

Moisture and ion transport properties in blended pastes and their relation to the refined pore structure

2021

Betydelsen av betongens koldioxidupptag ur ett livscykelperspektiv

2021

Ballastless Track – Minimizing the Climate Impact

Corrosion Pattern and Mechanical Behaviour of Corroded Rebars in Cracked Plain and Fibre Reinforced Concrete

The effect of fibres on corrosion of reinforced concrete

2020

Assessment of the mechanical behaviour of reinforcement bars with localised pitting corrosion by Digital Image Correlation

2020

Hybridarmerade konstruktioner i kloridhaltiga miljöer – beständighet, säkerhet och livscykelkostnader

Electrical monitoring of concrete using a novel structural sensor based on conductive cementitious mortar

2020

On the Mechanical Recycling of Decommisioned Insulation Polymer Composite Components

2020

Correlation between concrete cracks and corrosion characteristics of steel reinforcement in pre-cracked plain and fibre-reinforced concrete beams

Recycling and re-purposing decommisioned construction polymer composites for construction applications

2018

Electrical resistivity measurements in steel fibre reinforced cementitious materials

2018

The effect of fibres on steel bar corrosion and flexural behaviour of corroded RC beams

2018

Hybrid Reinforcement Systems for Crack Width Control in Concrete Structures - Final Report SBUF project number 12250

2018

Analytisk beräkningsmodell för tvångsprickor hos kombinationsarmerade konstruktionselement

2018

Experimental study of time-dependent properties of a low-pH concrete for deposition tunnels

2018

Adaptive inverse analysis (AIA) applied and verified on various fiber reinforced concrete composites

2018

Assessment of cast-in-situ FRC linings for high-speed railway tunnels with respect to fatigue and cracking

2017

Carbonation of concrete with mineral additions

2017

Corrosion-induced cracking and bond behaviour of corroded reinforcement bars in SFRC

2017

Temperatur- och hållfasthetsutveckling hos betong med Anläggningscement FA

2017

Corrosion-induced cracking and bond behaviour of corroding reinforcement bars in SFRC

2017

FIbrer i anläggningskonstruktioner

Concrete setting and hardening monitoring using a novel graphene-based sensor

Tillsatsmaterial

2017

Nytt om tillsatsmaterial och tillsatsmedel i Betonghandboken

2017

The influence of carbonation and age on salt frost scaling of concrete with mineral additions

Tillsatsmedel

2016

Predicting chloride induced depassiviation and minimum concrete cover with different binders

2016

The influence of carbonation and age on salt frost scaling of concrete with mineral additions

2016

Karbonatisering av slagg- och flygaskebetong - och dess inverkan på transportegenskaper

2016

Evaluation of Durability of Concrete with Mineral Additions with regard to Chloride-Induced Corrosion

A fully general and adaptive inverse analysis method for cementitious materials

2016

Characterisation of bending cracks in R/FRC using image analysis

2016

Effect of fibre reinforcement on the crack width profile and internal crack pattern of conventionally reinforced concrete beams

2016

Corrosion of Steel Bars Embedded in Fibre Reinforced Concrete under Chloride Attack: State-of-the-Art

2016

Influence of fibre reinforcement on the initiation of corrosion-induced cracks

2016

Investigation on the influence of fibre reinforcement on chloride induced corrosion of RC structures

2015

Kan fibrer påverka beständigheten av konventionellt armerade betongkonstruktioner?

2015

Corrosion initiation in cracked fibre reinforced concrete: Influence of crack width, fibre type and loading conditions

2014

Experimental Investigation on Rebar Corrosion in Combination with Fibres

2013

INFLUENCE OF STEEL FIBRES ON CORROSION OF REINFORCEMENT IN CONCRETE IN CHLORIDE ENVIRONMENTS: A REVIEW

2012

Bond between Reinforcement and Self-Compacting Steel-Fibre-Reinforced Concrete

Experimental investigation of surface crack initiation, propagation and tension stiffening in self-compacting steel-fibre-reinforced concrete

2012

Bond of reinforcement in self-compacting steel-fibre-reinforced concrete

Flexural Behaviour of members with a combination of steel fibres and conventional reinforcement

Fatigue performance evaluation of plain and fiber-reinforced concrete using wedge splitting test

Applying a fracture mechanics approach on FRC beams, material testing and structural analysis

The WST method, a fracture mechanics test method for FRC

Design methods of fibre reinforced concrete: a state-of-the-art review

MATERIAL TESTING AND STRUCTURAL ANALYSIS OF FRC BEAMS - AFRACTURE MECHANICS APPROACH

Applying a fracture mechanics approach to material testing and structural analysis of FRC beams

2007

Calculation of crack width and crack spacing

Dimensioneringsmetoder för fiberarmerad betong

2007

Beräkning av sprickbredd för konstruktioner utsatta för tvångskrafter

2006

Fiberarmerad betong – materialprovning och strukturanalys baserad på brottmekanik

2006

Early age cracking of self-compacting concrete

2005

The WST-method for fracture testing of fibre-reinforced concrete

2005

Cracking due to plastic and autogenous shrinkage - Investigation of early age deformation of self-compacting concrete - Experimental study

2005

Fracture properties of FRC determined through inverse analysis of wedge splitting and three-point bending tests

2005

Investigation of early age deformation in self-compacting concrete

2005

Fibre-reinforced Concrete for Industrial Construction - a fracture mechanics approach to material testing and structural analysis

2005

Plastiska krympsprickor - materialsammansättning och arbetsplatsåtgärder

2004

The wedge splitting test - a test method for assessment of fracture parameters of FRC?

2004

The wedge splitting test – a test method for assessment of fracture parameters of FRC?

2004

Fiberbetong - beräkningsmetod för bärande konstruktioner

2004

Application of WST-method for fracture testing of fibre-reinforced concrete

2004

Wedge splitting test - a test to determine fracture properties of FRC

Wedge splitting test method. Pilot Experiments.

2003

Forskning och utveckling för framtida stombyggnads-teknik

2003

Lattice Girder Elements - Investigation of Structural Behaviour and Performance Enhancements

2003

Analysis of Flexural Behaviour of Reinforced FRC Members

2002

Deformationsmätning vid pågjutning av plattbärlag - Provningsuppdrag för AB Färdig Betong

2002

Lattice Girder Elements - Structural Behaviour and Performance Enhancements

2002

Provning av spännarmerade plattbärlag - Provningsuppdrag för AB Färdig Betong

2001

In-situ Concrete Building - important aspects of industrialised construction

2001

In-situ concrete building - Innovations in Formwork

Industriellt platsgjutet byggande: Principer och metoder för industrialisering

2001

Lattice Girder Elements in Bending: Pilot Experiment.