Kristofer Bengtsson

Doktorand at Electrical Engineering, Reglerteknik, automation och mekatronik, Automation

Kristofer Bengtsson is a PhD in the Automation research group.

Source: chalmers.se

Projects

2013–2016

Automation and Robotics for EUropean Sustainabile manufacturing (AREUS)

Bengt Lennartson Reglerteknik, automation och mekatronik
Kristofer Bengtsson Automation
Oskar Wigström Automation
Sarmad Riazi Automation
European Commission (FP7)

There might be more projects where Kristofer Bengtsson participates, but you have to be logged in as a Chalmers employee to see them.

Publications

2017

Energy and Peak Power Optimization of Time-Bounded Robot Trajectories

Oskar Wigström, Sarmad Riazi, Kristofer Bengtsson et al
IEEE Transactions on Automation Science and Engineering. Vol. 14 (2), p. 646-657
Journal article
2017

Sequence Planner: Supporting Integrated Virtual Preparation and Commissioning

Patrik Bergagård, Petter Falkman, Kristofer Bengtsson et al
Paper in proceedings
2017

Automatic modeling and simulation of robot program behavior in integrated virtual preparation and commissioning

Petter Falkman, Martin Fabian, Kristofer Bengtsson et al
Paper in proceedings
2017

An event-driven manufacturing information system architecture for Industry 4.0

M. Lieder, Lundholm Thomas, Bengt Lennartson et al
International Journal of Production Research. Vol. 55 (5), p. 1297-1311
Journal article
2016

Modeling and Optimization of Hybrid Systems for the Tweeting Factory

Sarmad Riazi, Bengt Lennartson, Kristofer Bengtsson et al
IEEE Transactions on Automation Science and Engineering. Vol. 13 (1), p. 191-205
Journal article
2016

Energy and peak-power optimization of existing time-optimal robot trajectories

A. Aurnhammer, Bengt Lennartson, R. Bischoff et al
Proc. 12th IEEE Conference on Automation Science and Engineering (CASE 2016), Fort Worth, Texas, August, p. 321-327
Paper in proceedings
2016

Emergency department overview - Improving the dynamic capabilities using an event-driven information architecture

Linnéa Johansson, Elin Blomgren, Martin Pettersson et al
Paper in proceedings
2016

Integrated Virtual Preparation and Commissioning: supporting formal methods during automation systems development

Martin Fabian, Kristofer Bengtsson, Petter Falkman et al
IFAC-PapersOnLine. Vol. 49 (12), p. 1939-1944
Paper in proceedings
2015

Modeling and Optimization of Hybrid Systems

Kristofer Bengtsson, Sarmad Riazi, Bengt Lennartson et al
Proc. 5th IFAC Conference on Analysis and Design of Hybrid Systems (ADHS’15), Atlanta, October 14-16, IFAC-PapersOnLine. Vol. 48 (27), p. 351-357
Paper in proceedings
2015

An Event-Driven Manufacturing Information System Architecture

Thomas Lundholm, Bengt Lennartson, Julien Provost et al
IFAC-PapersOnLine. Vol. 48 (3), p. 547-554
Paper in proceedings
2015

AREUS — Innovative hardware and software for sustainable industrial robotics

Giovanni Berselli, Kristofer Bengtsson, Davis Meike et al
11th IEEE International Conference on Automation Science and Engineering, CASE 2015, Gothenburg, Sweden, 24-28 August 2015, p. 1325-1332
Paper in proceedings
2015

Optimization of hybrid Petri nets with shared variables

Bengt Lennartson, Oskar Wigström, Kristofer Bengtsson
11th IEEE International Conference on Automation Science and Engineering, CASE 2015, Gothenburg, Sweden, 24-28 August 2015, p. 1395-1396
Paper in proceedings
2015

Energy Optimization of Multi-robot Systems

Oskar Wigström, Bengt Lennartson, Sarmad Riazi et al
11th IEEE International Conference on Automation Science and Engineering, CASE 2015, Gothenburg, Sweden, 24-28 August 2015, p. 1345-1350
Paper in proceedings
2014

Managing product and production variety - A language workbench approach

Pierre Johansson, Amir Hossein Ebrahimi, Knut Åkesson et al
Procedia CIRP. VARIETY MANAGEMENT IN MANUFACTURING: PROCEEDINGS OF THE 47TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS. 47th CIRP Conference on Manufacturing Systems. Vol. 17, p. 338-344
Paper in proceedings
2014

Flexible Specification of Operation Behavior Using Multiple Projections

Kristofer Bengtsson, Bengt Lennartson
IEEE Transactions on Automation Science and Engineering. Vol. 11 (2), p. 504 - 515
Journal article
2014

A Gossip Algorithm for Home Healthcare Scheduling and Routing Problems

Kristofer Bengtsson, Payam Chehrazi, Oskar Wigström et al
19th IFAC World Congress on International Federation of Automatic Control, IFAC 2014; Cape Town; South Africa; 24 August 2014 through 29 August 2014. Vol. 19, p. 10754-10759
Paper in proceedings
2014

Patient coordination in emergency departments using an event-based information architecture

Bengt Lennartson, Kristofer Bengtsson
The 19th IEEE International Conference on Emerging Technologies and Factory Automation, p. 1-6
Paper in proceedings
2013

Patient coordination in emergency departments using visualization of operation behavior

Kristofer Bengtsson, Bengt Lennartson
Proceedings of the 2013 IEEE Symposium on Computational Intelligence in Healthcare and e-Health, CICARE 2013 - 2013 IEEE Symposium Series on Computational Intelligence, SSCI 2013, p. 58-63
Paper in proceedings
2013

Developing control logic using aspect-oriented programming and sequence planning

Kristofer Bengtsson, Oscar Ljungkrantz, Bengt Lennartson et al
Control Engineering Practice. Vol. 21 (1), p. 12-22
Journal article
2013

Operation Behavior Modeling using Relation Identification and Visualization Algorithms

Kristofer Bengtsson, Bengt Lennartson
IEEE International Conference,on Automation Science and Engineering (CASE), 2013 Madison, WI, p. 368 - 373
Paper in proceedings
2012

Sequence Planning Using Multiple and Coordinated Sequences of Operations

Petter Falkman, Bengt Lennartson, Patrik Bergagård et al
IEEE Transactions on Automation Science and Engineering. Vol. 9 (2), p. 308-319
Journal article
2011

Reduced-order synthesis of operation sequences

Mohammad Reza Shoaei, Bengt Lennartson, Kristofer Bengtsson et al
IEEE 16th Conference on Emerging Technologies and Factory Automation, ETFA 2011, Toulouse, 5-9 September 2011, p. 8-
Paper in proceedings
2011

Planning transport sequences for flexible manufacturing systems

Kristofer Bengtsson, Bengt Lennartson, Martin Fabian et al
IFAC Proceedings Volumes. 18th IFAC World Congress, Milano, 28 August - 2 September 2011. Vol. 18 (PART 1), p. 9494-9499
Paper in proceedings
2010

Relations Identification and Visualization for Sequence Planning and Automation Design

Carl Thorstensson, Kristofer Bengtsson, Petter Falkman et al
In Proc. IEEE Conference on Automation Science and Engineering, Toronto, p. 841 - 848
Paper in proceedings
2010

Sequence Planning for Integrated Product, Process and Automation Design

Martin Fabian, Kristin Andersson, Bengt Lennartson et al
IEEE Transactions on Automation Science and Engineering. Vol. 7 (4), p. 791-802
Journal article
2010

Operation Specification for Sequence Planning and Automation Design

Kristofer Bengtsson
Licentiate thesis
2010

Towards Sequence Planning Based on Configurable Product and Manufacturing System Platforms

Kristofer Bengtsson, Christoffer E Levandowski, Marcel Michaelis et al
Proceedings of the 8th International Conference NordDesign 2010. Vol. Vol. 2, p. 467-476
Paper in proceedings
2009

Operation-Oriented Specification for Integrated Control Logic Development

Bengt Lennartson, Chengyin Yuan, Kristofer Bengtsson et al
2009 IEEE Conference on Automation Science and Engineering, CASE 2009, Bangalore, India, p. 183-90
Paper in proceedings
2009

The Origin of Operations: Interactions Between the Product and the Manufacturing Automation Control System

Kristofer Bengtsson, Chengyin Yuan, Bengt Lennartson
13th IFAC Symposium on Information Control Problems in Manufacturing Technology, INCOM’09, Moscow, Russia, p. 40-5
Paper in proceedings
2009

Aspect-Oriented Programming for Manufacturing Automation Control Systems

Chengyin Yuan, Bengt Lennartson, Kristofer Bengtsson
13th IFAC Symposium on Information Control Problems in Manufacturing Technology, INCOM’09, Moscow, Russia (PART 1), p. 668-673
Paper in proceedings
2009

The Origin of Operations: Interactions Between the Product and the Manufacturing Automation Control System

Chengyin Yuan, Bengt Lennartson, Kristofer Bengtsson
13th IFAC Symposium on Information Control Problems in Manufacturing Technology, INCOM’09, Moscow, Russia, p. 40-5
Paper in proceedings
2009

Aspect-Oriented Programming for Manufacturing Automation Control Systems

Chengyin Yuan, Kristofer Bengtsson, Bengt Lennartson
13th IFAC Symposium on Information Control Problems in Manufacturing Technology, INCOM’09, Moscow, Russia (PART 1), p. 668-673
Paper in proceedings