Mats Halvarsson

2023

Role of surface morphology on bed material activation during indirect gasification of wood

2023

Intergranular oxidation of additively manufactured Ni-base alloy 625: The role of Si

2022

On the influence of varying the crystallographic texture of alumina CVD coatings on cutting performance in steel turning

2022

Low-pressure CVD of (Tix,W1-x)Ny from WF6, TiCl4 and NH3

2022

Efficacy of an external chromia layer in reducing nitridation of high temperature alloys

2022

High-temperature oxidation behavior of additively manufactured IN625: Effect of microstructure and grain size

2022

Schmid factor analysis for chip flow induced plastic deformation of textured cubic carbonitride coatings

2021

CVD TiAlN coatings with tunable nanolamella architectures

2021

Should the oxygen source be considered in the initiation of KCl-induced high-temperature corrosion?

2021

Calculated and experimental Schmid factors for chip flow deformation of textured CVD α-alumina coatings

2021

The effect of additive manufacturing on the initial High temperature oxidation properties of RE-containing FeCrAl alloys

2021

Kinetics of the low-pressure chemical vapor deposited tungsten nitride process using tungsten hexafluoride and ammonia precursors

Localized Atmospheric Corrosion of Magnesium-Aluminum Alloys Produced by Semisolid Casting: A 2D and 3D Investigation

2021

Atom probe tomography investigation of 3D nanoscale compositional variations in CVD TiAlN nanolamella coatings

2021

Growth model for high-Al containing CVD TiAlN coatings on cemented carbides using intermediate layers of TiN

2020

Chemical vapor deposition of TiN on a CoCrFeNi multi-principal element alloy substrate

Microstructure investigation of textured CVD alumina coatings

2020

Exploring failure modes of alumina scales on FeCrAl and FeNiCrAl alloys in a nitriding environment

Effects of gas flow on detailed microstructure inhomogeneities in LPCVD TiAlN nanolamella coatings

2019

Influence of KCl and HCl on a laser clad FeCrAl alloy: In-Situ SEM and controlled environment High temperature corrosion

2018

Transformation of amorphous calcium phosphate to bone-like apatite

Vertical Electrical Conductivity of ZnO/GaN Multilayers for Application in Distributed Bragg Reflectors

Interplay of water and reactive elements in oxidation of alumina-forming alloys

Effect of compositional interlayers on the vertical electrical conductivity of Si-doped AlN/GaN distributed Bragg reflectors grown on SiC''

2017

Properties of Alumina/Chromia Scales in N2-Containing Low Oxygen Activity Environment Investigated by Experiment and Theory

Influence of Multi-Pass Friction Stir Processing on the Corrosion Behavior of an Al-Mg-Si Alloy

In Situ Investigation of the Initial Stages of KCl-Induced Corrosion of a Chromia-Forming Steel at 450 degrees C Using an Environmental Scanning Electron Microscope

2016

A new semi-solid casting technique for fabricating SiC-reinforced Mg alloys matrix composites

2016

New insights into the corrosion of magnesium alloys - The role of aluminum

Bobbin and conventional friction stir welding of thick extruded AA6005-T6 profiles

On the microstructure and corrosion behavior of AZ91/SiC composites produced by rheocasting

Corrosion behaviour of friction stir-welded AA6005-T6 using a bobbin tool

2015

On the capability of in-situ exposure in an environmental scanning electron microscope for investigating the atmospheric corrosion of magnesium

In Situ ESEM Investigation of KCl-Induced Corrosion of a FeCrAl and a Model FeNiCrAl Alloy in Lab Air at 450 degrees C

2015

Influence of temperature on the atmospheric corrosion of the Mg–Al alloy AM50

First Three-Dimensional Atomic Resolution Investigation of Thermally Grown Oxide on a FeCrAl Alloy

Atmospheric Corrosion of Mg Alloy AZ91D Fabricated by a Semi-Solid Casting Technique: The Influence of Microstructure

Effect of thermal cycling on protective properties of alumina scale grown on thin Haynes 214 foil

2015

Numerical simulation of deformation development during dynamic tensile extrusion of OFHC copper incorporating microstructure evolution

Effect of Rheocasting on Corrosion of AM50 Mg Alloy

2015

The capability of Transmission Kikuchi Diffraction technique for characterizing nano-grained oxide scales formed on a FeCrAl stainless steel

Oxidation of Sanicro 25 (42Fe22Cr25NiWCuNbN) in O2 and O2 + H2O Environments at 600-750°C

Ex vivo alendronate localization at the mesoporous titania implant/bone interface

2015

KCl-Induced Corrosion of an FeCrAl Alloy at 600°C in O2 + H2O Environment: The Effect of Pre-oxidation

2015

Oxidation of a Dispersion-Strengthened Powder Metallurgical FeCrAl Alloy in the Presence of O2 at 1,100°C: The Influence of Water Vapour

Corrosion behavior of alloy AM50 in semi-solid cast and high pressure die cast states in cyclic conditions

2015

The Oxide Scales Formed on a Dispersion-Strengthened Powder Metallurgical FeCrAl Alloy at 900 A degrees C in O-2 and in O-2 + H2O

2015

Deformation and texture evolution of OFHC copper during dynamic tensile extrusion

Localized controlled drug delivery from mesoporous implants

NaCl-Induced Atmospheric Corrosion of the MgAl Alloy AM50-The Influence of CO2

Double oxide shell layer formed on a metal nanoparticle as revealed by aberration corrected (scanning) transmission electron microscopy

Microstructural Investigation of the HCl-Induced Corrosion of the Austenitic Alloy 310S (52Fe26Cr19Ni) at 500 °C

Microstructural characterization of the Mg-Al alloy AM50 produced by a newly developed rheo-casting process

High temperature oxidation of chromium: Kinetic modeling and microstructural investigation

Oxidation of Fe-10Cr in O-2 and in O-2+H2O environment at 600 degrees C: A microstructural investigation

NaCl-induced atmospheric corrosion of MgAl alloy AM50 in semi-solid cast and high pressure die cast form; relation between alloy microstructure and corrosion

Oxidation behavior of a Mo(Si,Al)2 composite at 900–1600 C in dry air

Raloxifene and alendronate containing thin mesoporous titanium oxide films improve implant fixation to bone.

Oxidation of Co- and Ce-nanocoated FeCr steels: A microstructural investigation

Oxidation studies of Fe10CrAl-RE alloys exposed to Pb at 550 degrees C for 10,000 h

2013

Influence of temperature on the atmospheric corrosion of the MgAl alloy AM50 produced by semi-solid cast and high pressure die cast technique

In vivo biomechanical stability of osseointegrating mesoporous TiO2 implants

Oxidation Behaviour of Sanicro 25 (42Fe22Cr25NiWCuNbN) in O-2/H2O Mixture at 600 degrees C

Oxidation of Binary FeCr Alloys (Fe–2.25Cr, Fe–10Cr, Fe–18Cr and Fe–25Cr) in O2 and in O2 + H2O Environment at 600 °C

The influence of small amounts of KCl(s) on the high temperature corrosion of a Fe-2.25Cr-1Mo steel at 400 and 500 degrees C

Oxidation behaviour of a Mo(Si,Al)2 based composite at 1500 degrees C

An ESEM in situ investigation of initial stages of the KCl induced high temperature corrosion of a Fe-2.25Cr-1Mo steel at 400 degrees C

In vitro response to mesoporous TiO2 thin films loaded with alendronate and raloxifene

CVD TiC/alumina multilayer coatings grown on sapphire single crystals

Oxidation behavior of a Mo (Si, Al)(2)-based composite at 300-1000 degrees C

Microstructural Investigation of the Initial Oxidation of the FeCrAlRE Alloy Kanthal AF in Dry and Wet O-2 at 600 and 800 degrees C

Oxidation of iron at 400-600 °C in dry and wet O2

Oxidation behavior at 300–1000C of a (Mo,W)Si2-based composite containing boride

Alumina scale formation on a powder metallurgical FeCrAl alloy (Kanthal APMT) at 900-1100°C in dry O2 and in O2 + H2O

CVD TiC/alumina and TiN/alumina multilayer coatings grown on sapphire single crystals

High Temperature Oxidation of the Austenitic (35Fe27Cr31Ni) Alloy Sanicro 28 in O-2 + H2O Environment

TEM Investigation of the Microstructure of the Scale Formed on a FeCrAlRE Alloy at 900 A degrees C: The Effect of Y-rich RE Particles

The influence of KCl on the corrosion of an austenitic stainless steel (304L) in oxidizing humid conditions at 600 ºC: A microstructural study

Oxidation behaviour of a (Mo, W)Si2-based composite in dry and wet oxygen atmospheres in the temperature range 350–950◦C

Investigation of the Evolution of the Oxide Scale Formed on 310 Stainless Steel Oxidized at 600 °C in Oxygen with 40% Water Vapour Using FIB and TEM

Microstructural investigation of the initial oxidation at 1450°C and 1500°C of a Mo(Si,Al)2-based composite

An ESEM in-situ investigation of the influence of H

Microstructural investigation of the KCl-induced Corrosion of the Austenitic alloy Sanicro 28 (35Fe27Cr31Ni) at 600°C

The influence of H2O on iron oxidation at 600?C: a microstructural study.

Grain contrast imaging in FIB and SEM

TEM Investigation of Alpha Alumina Films Deposited at Low Temperature

Early stages of the oxidation of a FeCrAlRE alloy (Kanthal AF) at 900 °C: A detailed microstructural investigation

Thin foil analysis in the SEM

Paralinear Oxidation of Chromium in O2 + H2O Environment at 600–700 °C

Cyclic oxidation of two FeCrAlRE foils at 1100 oC - The influence of the concentration of minor alloying elements on scale microstructure

TEM and DFT investigation of CVD TiN/κ–Al2O3 multilayer coatings

The effect of traces of SO2 on iron oxidation: A microstructural study

Influence of H2O(g) on the Oxide Microstructure of the Stainless Steel 353MA at 900°C in Oxygen.

Transmission electron microscopy and X-ray diffraction analysis of alumina coating by alternate-current inverted magnetron-sputtering technique

The effect of water vapor on the initial stages of oxidation of the FeCrAl alloy Kanthal AF at 900 degrees C

Investigation of FIB-thinned TEM cross-sections of oxide scales formed on type 310 steel at 600 C° in water vapour-containing oxygen atmospheres

Microstructural Investigation of Protective and Non-Protective Oxides on 11% Chromium Steel

The microstructure of CVD κ-Al2O3 multilayers separated by thin intermediate TiN or TiC layers

Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600°C

The Possibility of Investigating the Influence of Surface Contamination on Oxidation by Using Electron and Ion Microscopy

Microstructural investigation of chips formed during metal cutting

High resolution chemical analysis in SEM

Oxidation of FeCrAl alloys at 500-900 degrees C in dry O-2

SEM investigation of reactive element particles on the surface of Kanthal AF oxidized at 900°C

Microstructural investigation of the influence of KCl on the corrosion of 304L exposed to 5% O2 + N2

TEM investigation of the base oxide formed on FeCrAl at 900°C in dry O2 and O2 with 40% H2O

The Formation of Oxide Scale on FeCrAl at 900°C in dry O2 and O2 + 40% H2O

Microstructural investigation of the effect of water vapour on the oxidation of alloy 353 MA in oxygen at 700 and 900ºC

The beneficial effect of water vapour on the oxidation at 600 and 700 °C of a MoSi2-based composite

Oxidation behaviour of a MoSi2-based composite in different atmospheres in the low temperature range (400–550 °C)

Comparison of the oxidation behaviour of surface and inner bulk material of a MoSi2 based composite

Microanalysis on the oxidation and sulfate attack of partially stabilized zirconia thermal barrier coating

The influence of water vapor on the oxidation of MoSi2 at 450 °C

An Investigation of the Microstructure in the Pest Oxide of a MoSi2- Based Composite

On the Mechanism of MoSi2 Pesting in the Temperature Range 400–500°C

Theoretical Structure Determination of a Complex Material: κ-Al2O3

The microstructure and stability of CVD aluminia coatings

The microstructure of chemically vapour deposited AL2O3 coatings