Mikael Rigdahl

2024

Cellulose nanocrystal dispersions conjugated with symmetric and asymmetric dialkylamine groups

2021

Water-assisted extrusion and injection moulding of composites with surface-grafted cellulose nanocrystals – An upscaling study

2020

Melt Processing of Ethylene-Acrylic Acid Copolymer Composites Reinforced with Nanocellulose

2020

Injection Molding and Appearance of Cellulose-Reinforced Composites

2019

Hot-mould foaming of modified hemicelluloses and hydroxypropyl methylcellulose

2019

Extrusion Parameters for Foaming of a β-Glucan Concentrate

2019

Composites with surface-grafted cellulose nanocrystals (CNC)

2018

Flow behaviour and microstructure of a beta-glucan concentrate

Composites with surface-grafted cellulose nanocrystals (CNC)

2018

Surface treatment of cellulose nanocrystals (CNC): effects on dispersion rheology

2018

Chain-length shortening of methyl ethyl hydroxyethyl cellulose: An evaluation of the material properties and effect on foaming ability

Rheological characterization of hybrid LDPE nanocomposites containing graphite nanoplatelets

The Paper Boat: building a composite Optimist dinghy with cellulose fiber and epoxy matrix

2017

Linear and Nonlinear Rheology Combined with Dielectric Spectroscopy of Hybrid Polymer Nanocomposites for Semiconductive Applications

2017

Rheological properties of nanocellulose suspensions: effects of fibril/particle dimensions and surface characteristics

Extensional viscosity of a beta-glucan concentrate

2016

Preparation and Viscoelastic Properties of Composite Fibres Containing Cellulose Nanofibrils: Formation of a Coherent Fibrillar Network

Foaming of hydroxypropyl methylcellulose

Enhancing the electrical conductivity of carbon black/graphite nanoplatelets: Poly(ethylene-butyl acrylate) composites by melt extrusion

Rheological properties of aqueous nano-cellulosic dispersions

Nanocellulose in biocomposites

Processing window for extrusion foaming of hydroxypropyl methylcellulose

Influence of processing conditions on the linear and nonlinear oscillatory shear, extensional and combined dielectric-rheological properties of poly(ethylene-butyl acrylate)-graphite nanoplatelets-carbon black hybrid nanocomposites

Making foam from natural polymers

Foaming of hydroxypropyl methyl cellulose: Microstructure and mechanical properties

Effect of carbon black on electrical and rheological properties of graphite nanoplatelets/poly(ethylene-butyl acrylate) composites

Foaming of hydroxypropyl methylcellulose: Microstructure and mechanical properties

Continuous foaming of hydroxypropyl methylcellulose

Linear and nonlinear oscillatory shear, combined Rheo-DEA, DMTA-DEA and extensional rheological characterization of GnP-CB-EBA hybrid nanocomposites

Linear and nonlinear oscillatory shear extensional and combined methods for the characterization of graphene based nanocomposites: influence of processing conditions

Electrically conductive polymeric bi-component fibers containing a high load of low-structured carbon black

Foaming behavior of water-soluble cellulose derivatives: hydroxypropyl methylcellulose and ethyl hydroxyethyl cellulose

Fibre-spinning polyethylene glycol with nanofibrillar cellulose reinforcement

Fibre-spinning poly(ethylene glycol) with nanofibrillar cellulose reinforcement

Extensional viscosity of microfibrillated cellulose suspensions

Hemicellulose foam

An advanced framework for the rheological characterization of polymer nanocomposites

Cellulose composite fibre spinning using a capillary viscometer

Color changes due to thermal ageing and artificial weathering of pigmented and textured ABS

Extensional viscosity of microfibrillated cellulose suspensions

Melt spinning of PVDF fibers with enhanced beta phase structure

Elongational flow mixing for manufacturing of grahite nanoplatelet/polystyrene composites

Conducting bicomponent fibers obtained by melt spinning of PA6 and polyolefins containing high amounts of carbonaceous fillers

On the viscoelastic properties of microfibrillated cellulose (MFC) suspensions

Ageing of polymeric surfaces exhibiting flow marks - Effects on surface characteristics

Ghost marks - gloss-related defects in injection-molded plastics

Angle-resolved light scattering from textured injection-molded plastics

On the viscoelastic properties of microfibrillated cellulose (MFC) suspensions

Development and characterization of extruded biodegradable foams based on zein and pearl millet flour

Improvement of melt spinning properties and conductivity of immiscible polypropylene/polystyrene blends containing carbon black by addition of styrene-ethylene-butene-styrene block copolymer

Characteristics of flow marks in injection-moulded surfaces and their ageing behaviour

Influence of manufacturing on electrical performances of GNP/PS composites

Influence of manufacturing on electrical performances of graphite nanoplatelet filled polystyrene

Characteristics of flow marks in injection-moulded surfaces and their ageing behaviour

Melt spinning of conducting polymeric composites containing carbonaceous fillers

Processing and water absorption behavior of foamed potato starch

Melt rheology as a tool to evaluate dispersion of expanded graphite in PS

Improvement of melt spinning properties and conductivity of immiscible PP/PS blends containing carbon black by addition of SEBS

Rheological properties of elastomer-modified polypropylene and their influence on the formation of flow marks

Book of Abstracts AERC2010

The Influence of the Measuring/Viewing Angle on the Color of Injection-Molded Plastics

Conducting bicomponent fibres obtained by melt spinning of PA6 and polyolefins containing high amounts of carbonaceous fillers

Generation of flow marks - possible relations to the rheological properties of polypropylene melts

Evaluating contrast gloss of textured polymeric surfaces

Three-dimensional scanning electron microscopy characterization of the topography of textured polymeric surfaces

In situ studies and simulation of mould filling with a model system for PIM

On the relations between color,gloss, and surface texture in injection-molded plastics

Experiences of and Improvement of Writing Skills in a Lecture Based Course in Polymeric Materials

Processing and properties of expanded starch materials

Characterization of flow-induced surface defects in injection moulded components - Case studies

Rheological and thermal properties of a model system for PIM

Visual perception and measurements of texture and gloss of injection-molded plastics

On the relations between the surface topography and tactile perception of injection-moulded textured polymers

Processing and properties of expanded starch materials

Some effects of processing on the molecular structure and morphology of thermoplastic starch

Film blowing of thermoplastic starch

Characterisation of tiger stripes on injection-moulded polypropylene components

Rheological properties and PVT-behaviour of a model system for PIM

Processing and properties of mineral-interfaced cellulose fibre composites

Processing and properties of expanded starch materials

Processing and properties of expanded starch materials

The effect of texture on the pass/fail colour tolerances of injection-molded plastics

Processing and properties of expanded starch materials

Relations between colour, gloss and surface texture in injection-moulded plastics

Challenges set for coating powders applied to dry surface treatment of paper

On the stress-strain behavior of thermoplastic starch melts

The effect of some plasticizers on the viscosity and stress-strain behaviour of thermoplastic starch melts

Changes in dielectric properties for polyethylene at high frequencies

The influence of the processing parameters on the gloss and colour of an injection-moulded pigmented polypropylene

Extrusion processing of high amylose potato starch materials

Compression molding and tensile properties of thermoplastic potato starch materials

The influence of wet pressing and precalendering on the structure and properties of double-coated board

Relationships between gloss, surface texture and colour of injection moulded pigmented plastics

Injection Moulding and Mechanical properties of Recovered Polypropylene

Effects of injection-molding conditions on the gloss and color of pigmented polypropylene

On the relation between surface texture and gloss of injection-molded pigmented plastics

Characteristics of pigment-filled polymer coatings on paperboard

Pigment-filled polymer coatings on paperboard

The Gloss of Injection-Moulded Recovered Polypropylene

Surface treatment and printing properties of dispersion-coated paperboard

Effect of gloss and texture on the color of injection-molded pigmented plastics

Thermoplastic properties of oxidised starch

Dispersion coating with carboxylated and cross-linked styrene-butadiene latices. 2. Effects of substrate and polymer characteristics on the properties of coated paperboard

An approach to the dry-state preparation of coating particles for use in dry surface treatment of paper

Coating of surface-modified papers with poly(vinyl alcohol)

Viscoelastic structure properties of the polymer binder affecting the processability, structure and properties of dry surface treated papers

Dispersion coating with carboxylated and cross-linked styrene-buadiene latices. 1. Effect of some polymer characteristics on film properties

Influence of extrusion coating conditions on structure and tensile properties of polyethylenes

On the relation between surface texture and gloss of injection-moulded pigmented plastics

Color of pigmented plastics - Meaurements and predictions

Carboxylated and cross-linked styrene-butadiene latices for dispersion coating

Influence of binder thermomechanical properties on the fixing process and structure of dry surface treated papers

The clustering mechanism underlying a kinetic model related to Bose-Einstein statistics

Dispersion coating with carboxylated and cross-linked styrene-butadiene latices

Surface texture characterization of injection-molded pigmented plastics

Extrusion processing of high amylose potato starch materials

Dry-state preparation of coating particles to eliminate water usage prior to dry surface treatment of paper

The effect of hot calendering of the substrate on the barrier properties of pol(vinyl alcohol)-coated papers

Internal stresses and activation volumes from the stress relaxation behavior of polyethylene at low deformations