Antal Boldizar
Professor vid
Konstruktionsmaterial
System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) --- End of inner exception stack trace --- at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Net.TlsStream.CallProcessAuthentication(Object state) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetResponse() at HtmlAgilityPack.HtmlWeb.Get(Uri uri, String method, String path, HtmlDocument doc, IWebProxy proxy, ICredentials creds) in d:\Source\htmlagilitypack.new\Trunk\HtmlAgilityPack\HtmlWeb.cs:line 1355 at HtmlAgilityPack.HtmlWeb.LoadUrl(Uri uri, String method, WebProxy proxy, NetworkCredential creds) in d:\Source\htmlagilitypack.new\Trunk\HtmlAgilityPack\HtmlWeb.cs:line 1479 at HtmlAgilityPack.HtmlWeb.Load(String url, String method) in d:\Source\htmlagilitypack.new\Trunk\HtmlAgilityPack\HtmlWeb.cs:line 1103 at HtmlAgilityPack.HtmlWeb.Load(String url) in d:\Source\htmlagilitypack.new\Trunk\HtmlAgilityPack\HtmlWeb.cs:line 1061 at ChalmersResearchCMS.Utilities.ChalmersPersonalWeb.GetStaffDesc(String cid, String lang) in C:\Users\Urban Andersson\Source\Repos\chalmersresearchweb\ChalmersResearchCMS\Utilities\ChalmersPersonalWeb.cs:line 81
Källa: chalmers.se
Visar 89 publikationer
2020
Melt Processing of Ethylene-Acrylic Acid Copolymer Composites Reinforced with Nanocellulose
Abhijit Venkatesh, Johannes Thunberg, Karin Sjövold et al
Polymer Engineering and Science. Vol. in press
Artikel i vetenskaplig tidskrift
2019
Processing and structure of paperboard with a needled middle layer
Maria Klingberg, Antal Boldizar, Karin Hofer
Cellulose Chemistry and Technology. Vol. 53 (3-4), p. 315-323
Artikel i vetenskaplig tidskrift
2019
Composites with surface-grafted cellulose nanocrystals (CNC)
Lilian Forsgren, Karin Sjövold, Abhijit Venkatesh et al
Journal of Materials Science. Vol. 54, p. 3009-3022
Artikel i vetenskaplig tidskrift
2019
Dynamic Nanocellulose Networks for Thermoset-like yet Recyclable Plastics with a High Melt Stiffness and Creep Resistance
Anna Peterson, Ida Östergren, Antiope Lotsari et al
Biomacromolecules. Vol. 20 (10), p. 3924-3932
Artikel i vetenskaplig tidskrift
2019
Injection Molding and Appearance of Cellulose-Reinforced Composites
Lilian Forsgren, Johan C Berglund, Johannes Thunberg et al
Polymer Engineering and Science. Vol. In Press
Artikel i vetenskaplig tidskrift
2018
Cellulose nanofibril-reinforced composites using aqueous dispersed ethylene-acrylic acid copolymer
Abhijit Venkatesh, Johannes Thunberg, Tobias Moberg et al
Cellulose. Vol. 25 (8), p. 4577-4589
Artikel i vetenskaplig tidskrift
2018
Mechanical properties of paperboard with a needled middle layer
Maria Klingberg, Antal Boldizar, Karin Hofer
Cellulose Chemistry and Technology. Vol. 52 (1-2), p. 89-97
Artikel i vetenskaplig tidskrift
2018
Cellulose nanofibrils and amphiphilic copolymer based bio-composites
Abhijit Venkatesh, Johannes Thunberg, Tobias Moberg et al
, p. 54-54
Paper i proceeding
2018
Composites with surface-grafted cellulose nanocrystals (CNC)
Lilian Forsgren, Karin Sahlin, Abhijit Venkatesh et al
, p. 53-53
Paper i proceeding
2017
Wheat starch carbamate: Production, molecular characterization, and film forming properties
C. Menzel, G. Seisenbaeva, P. Agback et al
Carbohydrate Polymers. Vol. 172, p. 365-373
Artikel i vetenskaplig tidskrift
2016
Plastcizing starch by adding magnesium chloride or sodium chloride
Abhijit Venkatesh, Antal Boldizar
Starch/Staerke. Vol. 68 (5-6), p. Article no UNSP 1600191-
Artikel i vetenskaplig tidskrift
2016
Mechanical and thermal characterization of melt-filtered, blended and reprocessed post-consumer WEEE thermoplastics
Erik Stenvall, Antal Boldizar
Recycling. Vol. 1, p. 89-100
Artikel i vetenskaplig tidskrift
2016
Wet compounding of nanocellulose and amphiphilic copolymer EAA for composite reinforcement
Johannes Thunberg, Abhijit Venkatesh, Maria Klingberg et al
Proc Nordic Polymer Days, Helsinki 2016, p. 39-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2016
Magnesium chloride and sodium chloride as altenative plasticizers for starch
Abhijit Venkatesh, Antal Boldizar
Proc Nordic Polymer Days, Helsinki 2016, p. 73-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2016
Cellulose fibre composites mixed at wet state
Maria Klingberg, Antal Boldizar
Proc Nordic Polymer Days, Helsinki 2016, p. 30-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2016
The influence of compatibilizer addition and gamma irradiation on mechanical and rheological properties of a recycled WEEE plastics blend
Sandra Tostar, Erik Stenvall, Mark Foreman et al
Recycling. Vol. 1 (1), p. 101-110
Artikel i vetenskaplig tidskrift
2016
Biocomposites made of nanocellulose and amphiphiliccopolymer EAA
Abhijit Venkatesh, Johannes Thunberg, Maria Klingberg et al
Proc Materials for Tomorrow 2016, p. Nr 47-
Poster (konferens)
2015
Wet mixing of wood cellulose fibres and EAA composites
Maria Klingberg, Antal Boldizar
Proc. Nordic Polymer Days 2015, p. 5.5-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2015
Mechanical charaterisation and morphology development in a real collected and reprocessed WEEE plastic blend
Erik Stenvall, Antal Boldizar
Proc. Nordic Polymer Days 2015, p. 6.1-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2014
The Influence of Gamma Irradiation on Repeated Recycling and Accelerated Acrylonitrile Butadiene Styrene Terpolymer Aging
Sandra Tostar, Erik Stenvall, Antal Boldizar et al
International Journal of Waste Resources. Vol. 4 (3)
Artikel i vetenskaplig tidskrift
2014
Influence of processing conditions on the mechanical properties of melt-blended plastics
Erik Stenvall, Sandra Tostar, Antal Boldizar et al
Proc Nordic Polymer Days 2014, p. 92-93
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2014
Morphology and properties of melt-filtered and melt-blended WEEE thermoplastics
Erik Stenvall, Antal Boldizar
Proc. Materials for Tomorrow 2014, p. Nr 48-
Poster (konferens)
2014
Composite material of a thermoplastic polymer and cellulose fibres compounded in a wet state
Maria Klingberg, Antal Boldizar
Proc Nordic Polymer Days 2014, p. 118-119
Poster (konferens)
2014
Cellulose fibres and thermoplastic polymer composites, compounding at wet state
Maria Klingberg, Antal Boldizar
Proc. Materials for Tomorrow 2014, p. Nr 31-
Poster (konferens)
2014
The Processing Influence on the Structure and Properties of Melt-Filtered and Blended Electronic Waste Thermoplastics
Erik Stenvall, Antal Boldizar
Proc International Polymer Processing Society (PPS-30)
Paper i proceeding
2014
Injection molding of beverage container caps made of a composite consisting of wood cellulose fiber and an ethylene-acrylic acid copolymer
Ruth Arino Marine, Antal Boldizar
International Polymer Processing. Vol. 29 (4), p. 507-514
Artikel i vetenskaplig tidskrift
2013
An analysis of the composition and metal contamination of plastics from waste electrical and electronic equipment (WEEE)
Erik Stenvall, Sandra Tostar, Antal Boldizar et al
Waste Management. Vol. 33 (4), p. 915-922
Artikel i vetenskaplig tidskrift
2013
RECYCLING BY MELT-PROCESSING OF TERNARY PLASTIC BLENDS RELATED TO THE COMPOSITION OF ELECTRONIC WASTE PLASTICS
Erik Stenvall, Antal Boldizar, Mark Foreman et al
Proceedings of the Polymer Processing Society 29th Annual Meeting (PPS-29)
Paper i proceeding
2013
Antimony leaching in plastics from waste electrical and electronic equipment (WEEE) with various acids and gamma irradiation
Sandra Tostar, Erik Stenvall, Antal Boldizar et al
Waste Management. Vol. 33 (6), p. 1478-1482
Artikel i vetenskaplig tidskrift
2013
Thermal and viscoelastic properties of cellulosic gels with different ionic liquids and coagulation agents
Ruth Arino Marine, Malin Brodin, Antal Boldizar et al
BioResources. Vol. 8 (2), p. 2209-2221
Artikel i vetenskaplig tidskrift
2013
Melt processing of wood cellulose tissue and ethylene-acrylic acid copolymer composites
Ruth Arino Marine, Antal Boldizar
International Polymer Processing. Vol. 28 (4), p. 429-436
Artikel i vetenskaplig tidskrift
2013
Influence of processing conditions on the mechanical properties of melt-blended plastics
Erik Stenvall, Sandra Tostar, Antal Boldizar et al
Proc. Materials for Tomorrow 2013
Poster (konferens)
2013
Barrier screw compounding and mechanical properties of EAA copolymer and cellulose fiber composite
Ruth Arino Marine, Antal Boldizar
International Polymer Processing. Vol. 28 (4), p. 421-428
Artikel i vetenskaplig tidskrift
2013
The influence of extrusion conditions on mechanical and thermal properties of virgin and recycled PP, HIPS, ABS and their ternary blends
Erik Stenvall, Sandra Tostar, Antal Boldizar et al
International Polymer Processing. Vol. 28 (5), p. 541-549
Artikel i vetenskaplig tidskrift
2013
Processing and mechanical properties of wood cellulose fiber-reinforced thermoplastic composites
Ruth Arino Marine, Antal Boldizar
Proc Nordic Polymer Days 2013, Helsingfors, p. 31-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2013
Processing conditions on WEEE plastic model material blends
Erik Stenvall, Sandra Tostar, Antal Boldizar et al
Proc Nordiska Polymerdagarna 2013, Helsingfors, p. 75-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2012
Waste electrical and electronic equipment (WEEE) plastics composition
Erik Stenvall, Sandra Tostar, Antal Boldizar et al
Proc Materials for Tomorrow 2012, Gothenburg, p. Nr 29-
Poster (konferens)
2012
Ageing of polymeric surfaces exhibiting flow marks - Effects on surface characteristics
Giovanna Iannuzzi, Alexandra Nafari, Antal Boldizar et al
Journal of Applied Polymer Science. Vol. 126 (3), p. 1136-1145
Artikel i vetenskaplig tidskrift
2012
Processing and mechanical properties of thermoplastic composites based on cellulose fibers and ethylene-acrylic acid copolymer
Ruth Arino Marine, Antal Boldizar
Polymer Engineering and Science. Vol. 52 (9), p. 1951-1957
Artikel i vetenskaplig tidskrift
2012
WEEE Plastics Composition
Erik Stenvall, Sandra Tostar, Antal Boldizar et al
International Electronics Recycling Congress 2012, Salzburg
Poster (konferens)
2012
Compositional analysis of plastics from waste electrical and electronic equipment (WEEE)
Erik Stenvall, Antal Boldizar
Proc Nordic Polymer Days, Copenhagen, p. 3.10-
Paper i proceeding
2012
Some melt processing studies on cellulose-modified polyethylene composites
Ruth Arino Marine, Antal Boldizar
Proc Nordic Polymer Days, Copenhagen, p. 4.2-
Paper i proceeding
2011
Processing and mechanical properties of composites based on cellulose fibres and ethylene-acrylic acid copolymer
Ruth Arino Marine, Antal Boldizar
Proc. Nordic Polymer Days 2011, Stockholm, p. 48-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2011
Molecular modification and compabilization of collected polyethylene
Mia Sjöqvist, Antal Boldizar
Journal of Polymers and the Environment. Vol. 19, p. 335-340
Artikel i vetenskaplig tidskrift
2011
Improvement of melt spinning properties and conductivity of immiscible polypropylene/polystyrene blends containing carbon black by addition of styrene-ethylene-butene-styrene block copolymer
Martin Strååt, Antal Boldizar, Mikael Rigdahl et al
Polymer Engineering and Science. Vol. 51 (6), p. 1165-1169
Artikel i vetenskaplig tidskrift
2011
Processing and mechanical properties of cellulose fibres and ethylene-acrylic acid copolymer composites
Ruth Arino Marine, Antal Boldizar
Proc. Advances in Polymer Science and Technology 2, Linz, Austria, p. 112-
Paper i proceeding
2011
WEEE plastics recycling and compatibilization
Erik Stenvall, Antal Boldizar
Proc. Nordic Polymer days 2011, Stockholm, p. 130-
Poster (konferens)
2011
Melt spinning of conducting polymeric composites containing carbonaceous fillers
Martin Strååt, Staffan Toll, Antal Boldizar et al
Journal of Applied Polymer Science. Vol. 119 (6), p. 3264-3272
Artikel i vetenskaplig tidskrift
2010
Improvement of melt spinning properties and conductivity of immiscible PP/PS blends containing carbon black by addition of SEBS
Martin Strååt, Mikael Rigdahl, Antal Boldizar et al
Preprint
2010
The Influence of the Measuring/Viewing Angle on the Color of Injection-Molded Plastics
I. Arino, Antal Boldizar, Sofie Ignell et al
International Journal of Polymeric Materials and Polymeric Biomaterials. Vol. 59 (4), p. 292-306
Artikel i vetenskaplig tidskrift
2010
Dielectric properties of polyethylene foams at medium and high frequencies
Martin Strååt, Igor Chmutin, Antal Boldizar
Transactons of the Nordic Rheology Society. Vol. 18, p. 107-116
Paper i proceeding
2010
Processing and water absorption behavior of foamed potato starch
Mia Sjöqvist, Antal Boldizar, Mikael Rigdahl
Journal of Cellular Plastics. Vol. 46 (6), p. 497-517
Artikel i vetenskaplig tidskrift
2010
Factors Influencing the Dielectric Losses of Some Technical Grades of Polyethylene at 1.8 GHz
Martin Strååt, Antal Boldizar
Preprint
2009
Processing and properties of expanded starch materials
Mia Sjöqvist, Antal Boldizar, Mikael Rigdahl
Journal of Cellular Plastics. Vol. 45 (1), p. 51-66
Artikel i vetenskaplig tidskrift
2009
Properties of flexible gels prepared from cellulose derivative and ionic liquids
Malin Brodin, Ruth Arino Marine, Antal Boldizar et al
Polysaccharides as a Source of Advanced Materials, European Polysaccharide Network Of Excellence, September 21-24, 2009 Åbo, Finland, s. 138
Poster (konferens)
2009
Characterization of flow-induced surface defects in injection moulded components - Case studies
Giovanna Iannuzzi, Antal Boldizar, Mikael Rigdahl
Annual Transactions - The Nordic Rheology Society. Vol. 17, p. 157-165
Paper i proceeding
2009
Properties of flexible gels prepared from cellulose derivative and ionic liquid
Malin Brodin, Ruth Arino Marine, Antal Boldizar et al
Proc. 4th Workshop on cellulose, regenerated cellulose and cellulose derivatives (Karlstad University)
Paper i proceeding
2009
Thermal and rheological properties of microcrystalline cellulose dissolved in ionic liquids
Ruth Arino Marine, Malin Brodin, Antal Boldizar et al
Proc. Nordic Polymer Days, Copenhagen, p. 4.1-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2008
Biodegradable composition for film blowing
Antal Boldizar, Mats Thunwall, Vanda Kuthanova
Patent
2008
Some effects of processing on the molecular structure and morphology of thermoplastic starch
Annika Altskär, Roger Andersson, Antal Boldizar et al
Carbohydrate Polymers. Vol. 71 (4), p. 591-597
Artikel i vetenskaplig tidskrift
2008
Dielectric properties of polyethylene foams at medium and high frequencies
Martin Strååt, Igor Chmutin, Antal Boldizar
Proc. Polymer Processing Society (PPS-24) (S15-770)
Paper i proceeding
2008
Tribological investigation of coatings for artificial joints
Mohammed Hoseini, Anneli Jedenmalm, Antal Boldizar
Wear. Vol. 264, p. 958-966
Artikel i vetenskaplig tidskrift
2008
Film blowing of thermoplastic starch
Mats Thunwall, Vanda Kuthanova, Antal Boldizar et al
Carbohydrate Polymers. Vol. 71, p. 583-590
Artikel i vetenskaplig tidskrift
2008
Processing and properties of expanded starch materials
Mia Sjöqvist, Antal Boldizar, Mikael Rigdahl
Nordiska Polymerdagarna 2008
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2008
Processing and properties of mineral-interfaced cellulose fibre composites
Mats Thunwall, Antal Boldizar, Mikael Rigdahl et al
Journal of Applied Polymer Science. Vol. 107 (2), p. 918-929
Artikel i vetenskaplig tidskrift
2008
On the relations between the surface topography and tactile perception of injection-moulded textured polymers
Anna Valverde-Velasco, MariAnne Karlsson, Antal Boldizar et al
Proc. Polymer Processing Society 2008 (PPS-24) (S03-682)
Paper i proceeding
2008
Nanoclay plating of cellulosic fiber surfaces
Tom Lindström, Karl Banke, Tomas Larsson et al
Journal of Applied Polymer Science. Vol. 108, p. 887-891
Artikel i vetenskaplig tidskrift
2007
Processing and properties of expanded starch materials
Mia Sjöqvist, Antal Boldizar, Mikael Rigdahl
Proc Nordiska Polymerdagarna 2007
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2007
Foam extrusion and measurement of dielelctric properties at high frequencies on polyethylene foam
Martin Strååt, Antal Boldizar
Proc Nordiska Polymerdagarna 2007
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2007
Foam extrusion and dielectrical properties of foamed polyethylene at high frequencies
Martin Strååt, Antal Boldizar
Proc. Polymer Processing Society Europe/Africa Regional Meeting
Paper i proceeding
2007
Processing and properties of expanded starch materials
Mia Sjöqvist, Antal Boldizar, Mikael Rigdahl
Proc. Polymer Processing Society Europe/Africa Regional Meeting, Göteborg
Paper i proceeding
2007
Processing and properties of expanded starch materials
Mia Sjöqvist, Antal Boldizar, Mikael Rigdahl
Proc. Biofoams 2007, Capri, Italy
Paper i proceeding
2006
Changes in dielectric properties for polyethylene at high frequencies
Martin Strååt, Antal Boldizar, Mikael Rigdahl et al
Proc. Nordic Polymer Days, Copenhagen, p. Section 2.18-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2006
The influence of the processing parameters on the gloss and colour of an injection-moulded pigmented polypropylene
Antal Boldizar, Francesco Pisciotti, Ingrid Arino et al
Proc. Nordic Polymer Days, Copenhagen, p. Section 2.15-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2006
Extrusion processing of high amylose potato starch materials
Mats Thunwall, Antal Boldizar, Mikael Rigdahl
Carbohydrate Polymers. Vol. 65, p. 441-446
Artikel i vetenskaplig tidskrift
2006
The effect of some plasticizers on the viscosity and stress-strain behaviour of thermoplastic starch melts
Mats Thunwall, Vanda Khutanova, Antal Boldizar et al
Proc. Nordic Polymer Days, Copenhagen, p. Section 3.4-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2006
Compression molding and tensile properties of thermoplastic potato starch materials
Mats Thunwall, Antal Boldizar, Mikael Rigdahl
Biomacromolecules. Vol. 7, p. 981-986
Artikel i vetenskaplig tidskrift
2006
On the stress-strain behavior of thermoplastic starch melts
Mats Thunwall, Antal Boldizar, Mikael Rigdahl et al
International Journal of Polymer Analysis and Characterization. Vol. 11 (6), p. 419-428
Artikel i vetenskaplig tidskrift
2005
On PVT and Rheological Measurements of Polymer Melts
T Sedlacek, R Cermak, B Hausnerova et al
International Polymer Processing. Vol. 20 (3), p. 286-295
Artikel i vetenskaplig tidskrift
2005
Expancel microspheres in wood filled plastics
Helen Bergenudd, Per Nilsson, Ranko Velagic et al
Proc. Nordic Polymer Days, Göteborg, 2005
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2005
Injection Moulding and Mechanical properties of Recovered Polypropylene
Francesco Pisciotti, Antal Boldizar, Mikael Rigdahl
International Polymer Processing. Vol. 20 (3), p. 257-264
Artikel i vetenskaplig tidskrift
2005
Active Learning Through Group Dialogue in a Project Course on Environmentally Adapted Product Development
Maria Knutson Wedel, Antal Boldizar, Johan Malmqvist
Proceedings 1st Annual CDIO Conference, p. 35-
Paper i proceeding
2005
Tribilogical investigation of coatings for artificial joints
Mohammed Seyed Hoseini Nazari, Anneli Jedemalm, Antal Boldizar
Proc. Nordic Polymer Days, Chalmers, Göteborg
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2005
Effects of injection-molding conditions on the gloss and color of pigmented polypropylene
Francesco Pisciotti, Antal Boldizar, Mikael Rigdahl et al
Polymer Engineering and Science. Vol. 45 (12), p. 1557-1567
Artikel i vetenskaplig tidskrift
2005
The Gloss of Injection-Moulded Recovered Polypropylene
Francesco Pisciotti, Antal Boldizar, Mikael Rigdahl
International Polymer Processing. Vol. 20 (3), p. 250-256
Artikel i vetenskaplig tidskrift
2005
Thermoplastic properties of oxidised starch
Mats Thunwall, Vanda Kuthanova, Antal Boldizar et al
Nordic Polymer Days 2005, p. 65-66
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
2005
Tribological investigation of coatings for artificial joints
Mohammed Hoseini, Anders jedenmalm, Antal Boldizar
Proc. Intern. Conf. Mechanics of Biomaterials & Tissues
Paper i proceeding
2004
On the Effect of Pressure on the Shear and Elongational Viscosities of Polymer Melts
Tomas Sedlacek, Martin Zatloukal, Petr Filip et al
Polymer Engineering and Science. Vol. 44 (7), p. 1328-1337
Artikel i vetenskaplig tidskrift
2004
Extrusion processing of high amylose potato starch materials
Mats Thunwall, Antal Boldizar, Mikael Rigdahl
Nordic Polymer Days 2004, p. 2.8-
Konferensbidrag (offentliggjort, men ej förlagsutgivet)
Visar 3 forskningsprojekt
2017–2019
Rheological studies on nanocellulose suspensions
Roland Kádár
Konstruktionsmaterial
Antal Boldizar
Konstruktionsmaterial
Knut och Alice Wallenbergs Stiftelse
2016–2020
Tillverkning av nya högpresterande CNF biocompositer
Christian Müller
Polymerteknologi
Antal Boldizar
Konstruktionsmaterial
Stiftelsen för Strategisk forskning (SSF)
2012–2015
Hållbar återvinning av "gröna" plaster
Antal Boldizar
Polymera material och kompositer
Stiftelsen för miljöstrategisk forskning (Mistra)
Det kan finnas fler projekt där Antal Boldizar medverkar, men du måste vara inloggad som anställd på Chalmers för att kunna se dem.